Search Linux Wireless

[PATCH] wireless: fix wrong 160/80+80 MHz setting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Fix cfg80211_chandef_usable():
consider IEEE80211_VHT_CAP_EXT_NSS_BW when verifying 160/80+80 MHz.

Based on:
"Table 9-272 — Setting of the Supported Channel Width Set subfield and Extended NSS BW
Support subfield at a STA transmitting the VHT Capabilities Information field"
>From "Draft P802.11REVmd_D3.0.pdf"

Signed-off-by: Aviad Brikman <aviad.brikman@xxxxxxxxxx>
Signed-off-by: Shay Bar <shay.bar@xxxxxxxxxx>
---
 net/wireless/chan.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index 90f0f82cd9ca..a51d11d3be33 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -912,6 +912,7 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy,
        struct ieee80211_sta_vht_cap *vht_cap;
        struct ieee80211_edmg *edmg_cap;
        u32 width, control_freq, cap;
+       bool support_80_80 = false;

        if (WARN_ON(!cfg80211_chandef_valid(chandef)))
                return false;
@@ -979,9 +980,16 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy,
                        return false;
                break;
        case NL80211_CHAN_WIDTH_80P80:
-               cap = vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
+               cap = vht_cap->cap;
+               support_80_80 =
+                       ((cap &
+                         IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) ||
+                       (cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ &&
+                        cap & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) ||
+                       ((cap & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) >>
+                                   IEEE80211_VHT_CAP_EXT_NSS_BW_SHIFT > 1));
                if (chandef->chan->band != NL80211_BAND_6GHZ &&
-                   cap != IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)
+                   !support_80_80)
                        return false;
                /* fall through */
        case NL80211_CHAN_WIDTH_80:
@@ -1001,7 +1009,8 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy,
                        return false;
                cap = vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
                if (cap != IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ &&
-                   cap != IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)
+                   cap != IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ &&
+                   !(vht_cap->cap & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK))
                        return false;
                break;
        default:
--
2.17.1

________________________________
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any retransmission, dissemination, copying or other use of, or taking of any action in reliance upon this information is prohibited. If you received this in error, please contact the sender and delete the material from any computer. Nothing contained herein shall be deemed as a representation, warranty or a commitment by Celeno. No warranties are expressed or implied, including, but not limited to, any implied warranties of non-infringement, merchantability and fitness for a particular purpose.
________________________________





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux