Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/ath/wil6210/wmi.c:52: warning: Incorrect use of kernel-doc format: * Addressing - theory of operations
drivers/net/wireless/ath/wil6210/wmi.c:70: warning: Incorrect use of kernel-doc format: * @sparrow_fw_mapping provides memory remapping table for sparrow
drivers/net/wireless/ath/wil6210/wmi.c:80: warning: cannot understand function prototype: 'const struct fw_map sparrow_fw_mapping[] = '
drivers/net/wireless/ath/wil6210/wmi.c:107: warning: Cannot understand * @sparrow_d0_mac_rgf_ext - mac_rgf_ext section for Sparrow D0
drivers/net/wireless/ath/wil6210/wmi.c:115: warning: Cannot understand * @talyn_fw_mapping provides memory remapping table for Talyn
drivers/net/wireless/ath/wil6210/wmi.c:158: warning: Cannot understand * @talyn_mb_fw_mapping provides memory remapping table for Talyn-MB
drivers/net/wireless/ath/wil6210/wmi.c:236: warning: Function parameter or member 'x' not described in 'wmi_addr_remap'
drivers/net/wireless/ath/wil6210/wmi.c:255: warning: Function parameter or member 'section' not described in 'wil_find_fw_mapping'
drivers/net/wireless/ath/wil6210/wmi.c:278: warning: Function parameter or member 'wil' not described in 'wmi_buffer_block'
drivers/net/wireless/ath/wil6210/wmi.c:278: warning: Function parameter or member 'ptr_' not described in 'wmi_buffer_block'
drivers/net/wireless/ath/wil6210/wmi.c:278: warning: Function parameter or member 'size' not described in 'wmi_buffer_block'
drivers/net/wireless/ath/wil6210/wmi.c:307: warning: Function parameter or member 'wil' not described in 'wmi_addr'
drivers/net/wireless/ath/wil6210/wmi.c:307: warning: Function parameter or member 'ptr' not described in 'wmi_addr'
drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function parameter or member 'wil' not described in 'wil_find_cid_ringid_sta'
drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function parameter or member 'vif' not described in 'wil_find_cid_ringid_sta'
drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function parameter or member 'cid' not described in 'wil_find_cid_ringid_sta'
drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function parameter or member 'ringid' not described in 'wil_find_cid_ringid_sta'
drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function parameter or member 'vif' not described in 'wmi_evt_ignore'
drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function parameter or member 'id' not described in 'wmi_evt_ignore'
drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function parameter or member 'd' not described in 'wmi_evt_ignore'
drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function parameter or member 'len' not described in 'wmi_evt_ignore'
drivers/net/wireless/ath/wil6210/wmi.c:2588: warning: Function parameter or member 'wil' not described in 'wmi_rxon'
Cc: Maya Erez <merez@xxxxxxxxxxxxxx>
Cc: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: Jakub Kicinski <kuba@xxxxxxxxxx>
Cc: linux-wireless@xxxxxxxxxxxxxxx
Cc: wil6210@xxxxxxxxxxxxxxxx
Cc: netdev@xxxxxxxxxxxxxxx
Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
drivers/net/wireless/ath/wil6210/wmi.c | 28 ++++++++++++++------------
1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index c7136ce567eea..3a6ee85acf6c7 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -31,7 +31,7 @@ MODULE_PARM_DESC(led_id,
#define WIL_WAIT_FOR_SUSPEND_RESUME_COMP 200
#define WIL_WMI_PCP_STOP_TO_MS 5000
-/**
+/*
* WMI event receiving - theory of operations
*
* When firmware about to report WMI event, it fills memory area
@@ -48,7 +48,7 @@ MODULE_PARM_DESC(led_id,
* won't be completed because of blocked IRQ thread.
*/
-/**
+/*
* Addressing - theory of operations
*
* There are several buses present on the WIL6210 card.
@@ -66,7 +66,7 @@ MODULE_PARM_DESC(led_id,
* AHB address must be used.
*/
-/**
+/*
* @sparrow_fw_mapping provides memory remapping table for sparrow
*
* array size should be in sync with the declaration in the wil6210.h
@@ -103,7 +103,7 @@ const struct fw_map sparrow_fw_mapping[] = {
{0x800000, 0x804000, 0x940000, "uc_data", false, false},
};
-/**
+/*
* @sparrow_d0_mac_rgf_ext - mac_rgf_ext section for Sparrow D0
* it is a bit larger to support extra features
*/
@@ -111,7 +111,7 @@ const struct fw_map sparrow_d0_mac_rgf_ext = {
0x88c000, 0x88c500, 0x88c000, "mac_rgf_ext", true, true
};
-/**
+/*
* @talyn_fw_mapping provides memory remapping table for Talyn
*
* array size should be in sync with the declaration in the wil6210.h
@@ -154,7 +154,7 @@ const struct fw_map talyn_fw_mapping[] = {
{0x800000, 0x808000, 0xa78000, "uc_data", false, false},
};
-/**
+/*
* @talyn_mb_fw_mapping provides memory remapping table for Talyn-MB
*
* array size should be in sync with the declaration in the wil6210.h
@@ -229,7 +229,7 @@ u8 led_polarity = LED_POLARITY_LOW_ACTIVE;
/**
* return AHB address for given firmware internal (linker) address
- * @x - internal address
+ * @x: internal address
* If address have no valid AHB mapping, return 0
*/
static u32 wmi_addr_remap(u32 x)
@@ -247,7 +247,7 @@ static u32 wmi_addr_remap(u32 x)
/**
* find fw_mapping entry by section name
- * @section - section name
+ * @section: section name
*
* Return pointer to section or NULL if not found
*/
@@ -265,8 +265,9 @@ struct fw_map *wil_find_fw_mapping(const char *section)
/**
* Check address validity for WMI buffer; remap if needed
- * @ptr - internal (linker) fw/ucode address
- * @size - if non zero, validate the block does not
+ * @wil: driver data
+ * @ptr: internal (linker) fw/ucode address
+ * @size: if non zero, validate the block does not
* exceed the device memory (bar)
*
* Valid buffer should be DWORD aligned
@@ -300,7 +301,7 @@ void __iomem *wmi_buffer(struct wil6210_priv *wil, __le32 ptr_)
return wmi_buffer_block(wil, ptr_, 0);
}
-/**
+/*
* Check address validity
*/
void __iomem *wmi_addr(struct wil6210_priv *wil, u32 ptr)
@@ -1577,7 +1578,7 @@ wmi_evt_link_stats(struct wil6210_vif *vif, int id, void *d, int len)
evt->payload, payload_size);
}
-/**
+/*
* find cid and ringid for the station vif
*
* return error, if other interfaces are used or ring was not found
@@ -1868,7 +1869,7 @@ wmi_evt_link_monitor(struct wil6210_vif *vif, int id, void *d, int len)
cfg80211_cqm_rssi_notify(ndev, event_type, evt->rssi_level, GFP_KERNEL);
}
-/**
+/*
* Some events are ignored for purpose; and need not be interpreted as
* "unhandled events"
*/
@@ -2578,6 +2579,7 @@ int wmi_update_ft_ies(struct wil6210_vif *vif, u16 ie_len, const void *ie)
/**
* wmi_rxon - turn radio on/off
+ * @wil: driver data
* @on: turn on if true, off otherwise
*
* Only switch radio. Channel should be set separately.
--
2.25.1
