Search Linux Wireless

[PATCH][next] rt2x00: Use fallthrough pseudo-keyword

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@xxxxxxxxxx>
---
 .../net/wireless/ralink/rt2x00/rt2400pci.c    |  2 +-
 .../net/wireless/ralink/rt2x00/rt2500pci.c    |  2 +-
 .../net/wireless/ralink/rt2x00/rt2800lib.c    | 42 +++++++++----------
 .../net/wireless/ralink/rt2x00/rt2800mmio.c   |  1 -
 .../net/wireless/ralink/rt2x00/rt2800usb.c    |  1 -
 drivers/net/wireless/ralink/rt2x00/rt61pci.c  |  3 +-
 drivers/net/wireless/ralink/rt2x00/rt73usb.c  |  1 -
 7 files changed, 24 insertions(+), 28 deletions(-)

diff --git a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
index c1ac933349d1..c8bb378148c3 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
@@ -1291,7 +1291,7 @@ static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev,
 			break;
 		case 2: /* Failure, excessive retries */
 			__set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
-			/* Fall through - this is a failed frame! */
+			fallthrough;	/* this is a failed frame! */
 		default: /* Failure */
 			__set_bit(TXDONE_FAILURE, &txdesc.flags);
 		}
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
index 0859adebd860..2e015c16cd4b 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
@@ -1419,7 +1419,7 @@ static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev,
 			break;
 		case 2: /* Failure, excessive retries */
 			__set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
-			/* Fall through - this is a failed frame! */
+			fallthrough;	/* this is a failed frame! */
 		default: /* Failure */
 			__set_bit(TXDONE_FAILURE, &txdesc.flags);
 		}
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index a779fe771a55..fed6d21cd6ce 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -928,7 +928,7 @@ static void rt2800_rate_from_status(struct skb_frame_desc *skbdesc,
 	switch (rt2x00_get_field32(status, TX_STA_FIFO_PHYMODE)) {
 	case RATE_MODE_HT_GREENFIELD:
 		flags |= IEEE80211_TX_RC_GREEN_FIELD;
-		/* fall through */
+		fallthrough;
 	case RATE_MODE_HT_MIX:
 		flags |= IEEE80211_TX_RC_MCS;
 		break;
@@ -2567,7 +2567,7 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
 		switch (rt2x00dev->default_ant.tx_chain_num) {
 		case 1:
 			rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
-			/* fall through */
+			fallthrough;
 		case 2:
 			rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
 			break;
@@ -2576,7 +2576,7 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
 		switch (rt2x00dev->default_ant.rx_chain_num) {
 		case 1:
 			rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
-			/* fall through */
+			fallthrough;
 		case 2:
 			rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
 			break;
@@ -2768,10 +2768,10 @@ static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev,
 	switch (rt2x00dev->default_ant.tx_chain_num) {
 	case 3:
 		rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
-		/* fallthrough */
+		fallthrough;
 	case 2:
 		rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
-		/* fallthrough */
+		fallthrough;
 	case 1:
 		rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
 		break;
@@ -2780,10 +2780,10 @@ static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev,
 	switch (rt2x00dev->default_ant.rx_chain_num) {
 	case 3:
 		rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
-		/* fallthrough */
+		fallthrough;
 	case 2:
 		rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
-		/* fallthrough */
+		fallthrough;
 	case 1:
 		rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
 		break;
@@ -3005,10 +3005,10 @@ static void rt2800_config_channel_rf3853(struct rt2x00_dev *rt2x00dev,
 	switch (rt2x00dev->default_ant.tx_chain_num) {
 	case 3:
 		rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
-		/* fallthrough */
+		fallthrough;
 	case 2:
 		rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
-		/* fallthrough */
+		fallthrough;
 	case 1:
 		rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
 		break;
@@ -3017,10 +3017,10 @@ static void rt2800_config_channel_rf3853(struct rt2x00_dev *rt2x00dev,
 	switch (rt2x00dev->default_ant.rx_chain_num) {
 	case 3:
 		rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
-		/* fallthrough */
+		fallthrough;
 	case 2:
 		rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
-		/* fallthrough */
+		fallthrough;
 	case 1:
 		rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
 		break;
@@ -4216,14 +4216,14 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 				   rf->channel > 14);
 		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G2_EN,
 				   rf->channel <= 14);
-		/* fall-through */
+		fallthrough;
 	case 2:
 		/* Turn on secondary PAs */
 		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN,
 				   rf->channel > 14);
 		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN,
 				   rf->channel <= 14);
-		/* fall-through */
+		fallthrough;
 	case 1:
 		/* Turn on primary PAs */
 		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN,
@@ -4241,12 +4241,12 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 		/* Turn on tertiary LNAs */
 		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN, 1);
 		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN, 1);
-		/* fall-through */
+		fallthrough;
 	case 2:
 		/* Turn on secondary LNAs */
 		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
 		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
-		/* fall-through */
+		fallthrough;
 	case 1:
 		/* Turn on primary LNAs */
 		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
@@ -5438,10 +5438,10 @@ void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev)
 		switch (rt2x00dev->default_ant.tx_chain_num) {
 		case 3:
 			rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G2_EN, 1);
-			/* fall through */
+			fallthrough;
 		case 2:
 			rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
-			/* fall through */
+			fallthrough;
 		case 1:
 		default:
 			rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
@@ -5451,10 +5451,10 @@ void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev)
 		switch (rt2x00dev->default_ant.tx_chain_num) {
 		case 3:
 			rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A2_EN, 1);
-			/* fall through */
+			fallthrough;
 		case 2:
 			rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
-			/* fall through */
+			fallthrough;
 		case 1:
 		default:
 			rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1);
@@ -10100,10 +10100,10 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	switch (rx_chains) {
 	case 3:
 		spec->ht.mcs.rx_mask[2] = 0xff;
-		/* fall through */
+		fallthrough;
 	case 2:
 		spec->ht.mcs.rx_mask[1] = 0xff;
-		/* fall through */
+		fallthrough;
 	case 1:
 		spec->ht.mcs.rx_mask[0] = 0xff;
 		spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
index 110bb391c372..6e7c14757261 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
@@ -593,7 +593,6 @@ void rt2800mmio_queue_init(struct data_queue *queue)
 		break;
 
 	case QID_ATIM:
-		/* fallthrough */
 	default:
 		BUG();
 		break;
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
index 4cc64fe481a7..d08b251ec5a2 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
@@ -746,7 +746,6 @@ static void rt2800usb_queue_init(struct data_queue *queue)
 		break;
 
 	case QID_ATIM:
-		/* fallthrough */
 	default:
 		BUG();
 		break;
diff --git a/drivers/net/wireless/ralink/rt2x00/rt61pci.c b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
index eefce76fc99b..43c3cdd13710 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
@@ -2130,7 +2130,7 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
 			break;
 		case 6: /* Failure, excessive retries */
 			__set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
-			/* Fall through - this is a failed frame! */
+			fallthrough;	/* this is a failed frame! */
 		default: /* Failure */
 			__set_bit(TXDONE_FAILURE, &txdesc.flags);
 		}
@@ -2953,7 +2953,6 @@ static void rt61pci_queue_init(struct data_queue *queue)
 		break;
 
 	case QID_ATIM:
-		/* fallthrough */
 	default:
 		BUG();
 		break;
diff --git a/drivers/net/wireless/ralink/rt2x00/rt73usb.c b/drivers/net/wireless/ralink/rt2x00/rt73usb.c
index e908c303b677..e69793773d87 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt73usb.c
@@ -2373,7 +2373,6 @@ static void rt73usb_queue_init(struct data_queue *queue)
 		break;
 
 	case QID_ATIM:
-		/* fallthrough */
 	default:
 		BUG();
 		break;
-- 
2.27.0




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux