Larry Finger wrote:
gavron@xxxxxxxxxxx wrote:
I haven't tried a build yet, but please let me know if I'm on the
right track.
E
# diff -uN /tmp/phy.c drivers/net/wireless/b43legacy/phy.c
--- /tmp/phy.c 2008-09-06 15:13:33.000000000 -0700
+++ drivers/net/wireless/b43legacy/phy.c 2008-09-06
15:54:03.000000000 -0700
@@ -1010,7 +1010,7 @@
b43legacy_phy_initb5(dev);
else
b43legacy_phy_initb6(dev);
- if (phy->rev >= 2 || phy->gmode)
+ if (phy->rev >= 2 && phy->gmode)
b43legacy_phy_inita(dev);
if (phy->rev >= 2) {
@@ -1021,21 +1021,26 @@
b43legacy_phy_write(dev, 0x0811, 0x0000);
b43legacy_phy_write(dev, 0x0015, 0x00C0);
}
- if (phy->rev > 5) {
+ if (phy->rev >= 3) {
AFAIK, this change is an error in the specs. I have since changed it.
Sorry I didn't catch it earlier.
Otherwise, this patch seems to be correct. All you need now are the
fixes for b43legacy_phy_initb5() and b43legacy_phy_initb6().
Larry
Ok, I've re-looked at the specs and made the appropriate corrections.
I've also gone through all of the PHY specs and found one other
correction. It's enclosed below for review.
Where do I go to find the stuff for ...initb5() and ...initb6()?
Thanks
E
# diff -uN /tmp/phy.c drivers/net/wireless/b43legacy/phy.c
--- /tmp/phy.c 2008-09-06 15:13:33.000000000 -0700
+++ drivers/net/wireless/b43legacy/phy.c 2008-09-06
16:42:40.000000000 -0700
@@ -1010,7 +1010,7 @@
b43legacy_phy_initb5(dev);
else
b43legacy_phy_initb6(dev);
- if (phy->rev >= 2 || phy->gmode)
+ if (phy->rev >= 2 && phy->gmode)
b43legacy_phy_inita(dev);
if (phy->rev >= 2) {
@@ -1025,17 +1025,22 @@
b43legacy_phy_write(dev, 0x0811, 0x0400);
b43legacy_phy_write(dev, 0x0015, 0x00C0);
}
- if (phy->rev >= 2 || phy->gmode) {
+ if (phy->gmode) {
tmp = b43legacy_phy_read(dev, 0x0400) & 0xFF;
- if (tmp == 3 || tmp == 5) {
+ if (tmp == 3) {
+ b43legacy_phy_write(dev, 0x04C2, 0x1816);
+ b43legacy_phy_write(dev, 0x04C3, 0x8606);
+ }
+ if (tmp == 4 || tmp == 5) {
b43legacy_phy_write(dev, 0x04C2, 0x1816);
b43legacy_phy_write(dev, 0x04C3, 0x8006);
- if (tmp == 5)
- b43legacy_phy_write(dev, 0x04CC,
- (b43legacy_phy_read(dev,
- 0x04CC) & 0x00FF) |
- 0x1F00);
+ b43legacy_phy_write(dev, 0x04CC,
+ (b43legacy_phy_read(dev,
+ 0x04CC) & 0x00FF) |
+ 0x1F00);
}
+ }
+ if (phy-->rev >= 2)
b43legacy_phy_write(dev, 0x047E, 0x0078);
}
if (phy->radio_rev == 8) {
@@ -1092,7 +1097,7 @@
*/
b43legacy_nrssi_hw_update(dev, 0xFFFF);
b43legacy_calc_nrssi_threshold(dev);
- } else if (phy->gmode || phy->rev >= 2) {
+ } else if (phy->gmode) {
if (phy->nrssi[0] == -1000) {
B43legacy_WARN_ON(phy->nrssi[1] != -1000);
b43legacy_calc_nrssi_slope(dev);
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html