Kalle Valo <kvalo@xxxxxxxxxxxxxx> wrote: > PCI devices like QCA6390 have a separate firmware image for the m3 > micro-controller. Add support to load the firmware using m3.bin file. > > Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 > Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 > > Signed-off-by: Govind Singh <govinds@xxxxxxxxxxxxxx> > Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx> 11 patches applied to ath-next branch of ath.git, thanks. 569704544778 ath11k: add support for m3 firmware 6eb6ea513828 ath11k: add board file support for PCI devices eb8de0490e1f ath11k: fill appropriate QMI service instance id for QCA6390 654e959ae0a1 ath11k: pci: add read32() and write32() hif operations c4eacabee224 ath11k: configure copy engine msi address in CE srng 2c3960c2253d ath11k: setup ce tasklet for control path 26f3a021b37c ath11k: allocate smaller chunks of memory for firmware f44dd33e6336 ath11k: fix memory OOB access in qmi_decode 6c809d04c542 ath11k: fix KASAN warning of ath11k_qmi_wlanfw_wlan_cfg_send 727fae1478a5 ath11k: enable internal sleep clock f7eb4b04ce6f ath11k: hal: create hw_srng_config dynamically -- https://patchwork.kernel.org/patch/11713607/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
