ath10k_sta_statistics is used to report many info to iw wlan0 link,
if it return for empty legacy and nss of arsta->txrate, then the other
stats after it will not be set.
It has 4 bit to set after the return:
NL80211_STA_INFO_TX_FAILED
NL80211_STA_INFO_RX_BITRATE
NL80211_STA_INFO_TX_BITRATE
NL80211_STA_INFO_TX_RETRIES
This patch not effect the info of above 4 bit for all hardware, reason
as below:
NL80211_STA_INFO_TX_FAILED is only for htt.disable_tx_comp is true, it
is for QCA6174 SDIO.
NL80211_STA_INFO_RX_BITRATE and NL80211_STA_INFO_TX_BITRATE are both
set in ath10k_mac_sta_get_peer_stats_info, it is only enabled for chips
which supports_peer_stats_info is true in hw_params, recently only for
QCA6174 SDIO, NL80211_STA_INFO_TX_BITRATE is set again in function
ath10k_mac_sta_get_peer_stats_info because the value which parsed from
arsta->tx_rate_code and arsta->tx_bitrate_kbps is correct for QCA6174
SDIO and PCIe, and the value arsta->txrate is not correct for QCA6174
SDIO and PCIe, so it need to set again with the correct value.
NL80211_STA_INFO_TX_RETRIES is use value of arsta->tx_retries, it is set
in ath10k_update_per_peer_tx_stats, which accumulate the retry_pkts in
HTT message from firmware, if the chips not support this feature, then
it is always 0 after accumulate, then iw wlan0 station dump always show
0 for retry count. If not set NL80211_STA_INFO_TX_RETRIES here, then it
is still 0, so the result is same, then set NL80211_STA_INFO_TX_RETRIES
has no effect.
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00048
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Signed-off-by: Wen Gong <wgong@xxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/mac.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 3e3896214e8b..4554a82d0105 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -8533,18 +8533,17 @@ static void ath10k_sta_statistics(struct ieee80211_hw *hw,
sinfo->rx_duration = arsta->rx_duration;
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_DURATION);
- if (!arsta->txrate.legacy && !arsta->txrate.nss)
- return;
-
- if (arsta->txrate.legacy) {
- sinfo->txrate.legacy = arsta->txrate.legacy;
- } else {
- sinfo->txrate.mcs = arsta->txrate.mcs;
- sinfo->txrate.nss = arsta->txrate.nss;
- sinfo->txrate.bw = arsta->txrate.bw;
+ if (arsta->txrate.legacy || arsta->txrate.nss) {
+ if (arsta->txrate.legacy) {
+ sinfo->txrate.legacy = arsta->txrate.legacy;
+ } else {
+ sinfo->txrate.mcs = arsta->txrate.mcs;
+ sinfo->txrate.nss = arsta->txrate.nss;
+ sinfo->txrate.bw = arsta->txrate.bw;
+ }
+ sinfo->txrate.flags = arsta->txrate.flags;
+ sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
}
- sinfo->txrate.flags = arsta->txrate.flags;
- sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
if (ar->htt.disable_tx_comp) {
sinfo->tx_failed = arsta->tx_failed;
--
2.23.0
