iwconfig txpower can now be used to set tx power to fixed or auto. If set to
auto the default firmware settings are used.
Signed-off-by: Anna Neal <anna@xxxxxxxxxxx>
Signed-off-by: Javier Cardona <javier@xxxxxxxxxxx>
---
drivers/net/wireless/libertas/cmd.c | 64 +++++++++++++++++++++++++++++++
drivers/net/wireless/libertas/cmd.h | 6 +++
drivers/net/wireless/libertas/defs.h | 9 ++++
drivers/net/wireless/libertas/host.h | 1 +
drivers/net/wireless/libertas/hostcmd.h | 24 +++++++++--
drivers/net/wireless/libertas/wext.c | 23 ++++++++++-
6 files changed, 120 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 802547e..6cc4858 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1971,6 +1971,70 @@ void lbs_ps_confirm_sleep(struct lbs_private *priv)
}
+/**
+ * @brief Configures the transmission power control functionality.
+ *
+ * @param priv A pointer to struct lbs_private structure
+ * @param enable Transmission power control enable
+ * @param p0 Power level when link quality is good (dBm).
+ * @param p1 Power level when link quality is fair (dBm).
+ * @param p2 Power level when link quality is poor (dBm).
+ * @param usesnr Use Signal to Noise Ratio in TPC
+ *
+ * @return 0 on success
+ */
+int lbs_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
+ int8_t p2, int usesnr)
+{
+ struct cmd_ds_802_11_tpc_cfg cmd;
+ int ret;
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+ cmd.action = cpu_to_le16(CMD_ACT_SET);
+ cmd.enable = !!enable;
+ cmd.usesnr = !!enable;
+ cmd.P0 = p0;
+ cmd.P1 = p1;
+ cmd.P2 = p2;
+
+ ret = lbs_cmd_with_response(priv, CMD_802_11_TPC_CFG, &cmd);
+
+ return ret;
+}
+
+/**
+ * @brief Configures the power adaptation settings.
+ *
+ * @param priv A pointer to struct lbs_private structure
+ * @param enable Power adaptation enable
+ * @param p0 Power level for 1, 2, 5.5 and 11 Mbps (dBm).
+ * @param p1 Power level for 6, 9, 12, 18, 22, 24 and 36 Mbps (dBm).
+ * @param p2 Power level for 48 and 54 Mbps (dBm).
+ *
+ * @return 0 on Success
+ */
+
+int lbs_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0,
+ int8_t p1, int8_t p2)
+{
+ struct cmd_ds_802_11_pa_cfg cmd;
+ int ret;
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+ cmd.action = cpu_to_le16(CMD_ACT_SET);
+ cmd.enable = !!enable;
+ cmd.P0 = p0;
+ cmd.P1 = p1;
+ cmd.P2 = p2;
+
+ ret = lbs_cmd_with_response(priv, CMD_802_11_PA_CFG , &cmd);
+
+ return ret;
+}
+
+
static struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv,
uint16_t command, struct cmd_header *in_cmd, int in_cmd_size,
int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *),
diff --git a/drivers/net/wireless/libertas/cmd.h b/drivers/net/wireless/libertas/cmd.h
index 11ac996..77bd070 100644
--- a/drivers/net/wireless/libertas/cmd.h
+++ b/drivers/net/wireless/libertas/cmd.h
@@ -26,6 +26,12 @@ int __lbs_cmd(struct lbs_private *priv, uint16_t command,
int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *),
unsigned long callback_arg);
+int lbs_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0,
+ int8_t p1, int8_t p2);
+
+int lbs_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
+ int8_t p2, int usesnr);
+
int lbs_cmd_copyback(struct lbs_private *priv, unsigned long extra,
struct cmd_header *resp);
diff --git a/drivers/net/wireless/libertas/defs.h b/drivers/net/wireless/libertas/defs.h
index 4b2428a..c89d7a1 100644
--- a/drivers/net/wireless/libertas/defs.h
+++ b/drivers/net/wireless/libertas/defs.h
@@ -189,6 +189,15 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in
#define MRVDRV_CMD_UPLD_RDY 0x0008
#define MRVDRV_CARDEVENT 0x0010
+
+/* Automatic TX control default levels */
+#define POW_ADAPT_DEFAULT_P0 13
+#define POW_ADAPT_DEFAULT_P1 15
+#define POW_ADAPT_DEFAULT_P2 18
+#define TPC_DEFAULT_P0 5
+#define TPC_DEFAULT_P1 10
+#define TPC_DEFAULT_P2 13
+
/** TxPD status */
/* Station firmware use TxPD status field to report final Tx transmit
diff --git a/drivers/net/wireless/libertas/host.h b/drivers/net/wireless/libertas/host.h
index da618fc..a916bb9 100644
--- a/drivers/net/wireless/libertas/host.h
+++ b/drivers/net/wireless/libertas/host.h
@@ -83,6 +83,7 @@
#define CMD_802_11_INACTIVITY_TIMEOUT 0x0067
#define CMD_802_11_SLEEP_PERIOD 0x0068
#define CMD_802_11_TPC_CFG 0x0072
+#define CMD_802_11_PA_CFG 0x0073
#define CMD_802_11_FW_WAKE_METHOD 0x0074
#define CMD_802_11_SUBSCRIBE_EVENT 0x0075
#define CMD_802_11_RATE_ADAPT_RATESET 0x0076
diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h
index d27c276..630b799 100644
--- a/drivers/net/wireless/libertas/hostcmd.h
+++ b/drivers/net/wireless/libertas/hostcmd.h
@@ -607,14 +607,28 @@ struct cmd_ds_802_11_eeprom_access {
} __attribute__ ((packed));
struct cmd_ds_802_11_tpc_cfg {
+ struct cmd_header hdr;
+
__le16 action;
- u8 enable;
- s8 P0;
- s8 P1;
- s8 P2;
- u8 usesnr;
+ uint8_t enable;
+ int8_t P0;
+ int8_t P1;
+ int8_t P2;
+ uint8_t usesnr;
} __attribute__ ((packed));
+
+struct cmd_ds_802_11_pa_cfg {
+ struct cmd_header hdr;
+
+ __le16 action;
+ uint8_t enable;
+ int8_t P0;
+ int8_t P1;
+ int8_t P2;
+} __attribute__ ((packed));
+
+
struct cmd_ds_802_11_led_ctrl {
__le16 action;
__le16 numled;
diff --git a/drivers/net/wireless/libertas/wext.c b/drivers/net/wireless/libertas/wext.c
index 426f1fe..b08bad8 100644
--- a/drivers/net/wireless/libertas/wext.c
+++ b/drivers/net/wireless/libertas/wext.c
@@ -1820,7 +1820,17 @@ static int lbs_set_txpow(struct net_device *dev, struct iw_request_info *info,
}
if (vwrq->fixed == 0) {
- /* Auto power control */
+ /* User requests automatic tx power control, however there are
+ * many auto tx settings. For now use firmware defaults until
+ * we come up with a good way to expose these to the user. */
+ ret = lbs_power_adapt_cfg(priv, 1, POW_ADAPT_DEFAULT_P0,
+ POW_ADAPT_DEFAULT_P1, POW_ADAPT_DEFAULT_P2);
+ if (ret)
+ goto out;
+ ret = lbs_tpc_cfg(priv, 0, TPC_DEFAULT_P0, TPC_DEFAULT_P1,
+ TPC_DEFAULT_P2, 1);
+ if (ret)
+ goto out;
dbm = priv->txpower_max;
} else {
/* Userspace check in iwrange if it should use dBm or mW,
@@ -1830,7 +1840,8 @@ static int lbs_set_txpow(struct net_device *dev, struct iw_request_info *info,
goto out;
}
- /* Validate requested power level against firmware allowed levels */
+ /* Validate requested power level against firmware allowed
+ * levels */
if (priv->txpower_min && (dbm < priv->txpower_min)) {
ret = -EINVAL;
goto out;
@@ -1840,6 +1851,14 @@ static int lbs_set_txpow(struct net_device *dev, struct iw_request_info *info,
ret = -EINVAL;
goto out;
}
+ ret = lbs_power_adapt_cfg(priv, 0, POW_ADAPT_DEFAULT_P0,
+ POW_ADAPT_DEFAULT_P1, POW_ADAPT_DEFAULT_P2);
+ if (ret)
+ goto out;
+ ret = lbs_tpc_cfg(priv, 0, TPC_DEFAULT_P0, TPC_DEFAULT_P1,
+ TPC_DEFAULT_P2, 1);
+ if (ret)
+ goto out;
}
/* If the radio was off, turn it on */
--
1.5.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
