This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through a module parameter * all rules are built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent (CRDA) through udev allowing distributions to update regulatory rules without updating the kernel. Updates on regulatory rules can now be left as an independent effort. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Signed-off-by: Luis R. Rodriguez <lrodriguez@xxxxxxxxxxx> --- This addresses Johannes' comments on the latest v4 patch. Namely: * Fix flags which were being set to << 4 * Start bitmap fresh, no need for no-ht20 or no-ht40, will sync userspace * I was setting bandwidth to 80 MHz for the static definitions, its now fixed to 40 MHz * Fix a typo * Use '0' instead of 48 for the character check on world regdom * Do not export __regulatory_hint() for now, this can be exported later once 11d support is added which *will* make use of this. * Review the BUG_ON() order on ignore request. Documentation/feature-removal-schedule.txt | 18 + include/linux/nl80211.h | 96 ++++- include/net/cfg80211.h | 51 +++ include/net/mac80211.h | 2 + include/net/wireless.h | 52 +++ net/mac80211/cfg.c | 7 + net/wireless/Kconfig | 30 ++ net/wireless/core.c | 137 ++++++- net/wireless/core.h | 2 +- net/wireless/nl80211.c | 140 ++++++ net/wireless/reg.c | 652 +++++++++++++++++++++++----- net/wireless/reg.h | 44 ++ 12 files changed, 1113 insertions(+), 118 deletions(-) create mode 100644 net/wireless/reg.h diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index eb1a47b..c93fcde 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -6,6 +6,24 @@ be removed from this file. --------------------------- +What: old static regulatory information and ieee80211_regdom module parameter +When: 2.6.29 +Why: The old regulatory infrastructure has been replaced with a new one + which does not require statically defined regulatory domains. We do + not want to keep static regulatory domains in the kernel due to the + the dynamic nature of regulatory law and localization. We kept around + the old static definitions for the regulatory domains of: + * US + * JP + * EU + and used by default the US when CONFIG_WIRELESS_OLD_REGULATORY was + set. We also kept around the ieee80211_regdom module parameter in case + some applications were relying on it. Changing regulatory domains + can now be done instead by using nl80211, as is done with iw. +Who: Luis R. Rodriguez <lrodriguez@xxxxxxxxxxx> + +--------------------------- + What: dev->power.power_state When: July 2007 Why: Broken design for runtime control over driver power states, confusing diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 5e51f4e..9bad654 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -92,6 +92,20 @@ * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by * %NL80211_ATTR_IFINDEX. * + * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command + * after being queried by the kernel. CRDA replies by sending a regulatory + * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our + * current alpha2 if it found a match. It also provides + * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each + * regulatory rule is a nested set of attributes given by + * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and + * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by + * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and + * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. + * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain + * to the the specified ISO/IEC 3166-1 alpha2 country code. The core will + * store this as a valid request and then query userspace for it. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -131,7 +145,10 @@ enum nl80211_commands { NL80211_CMD_SET_BSS, - /* add commands here */ + NL80211_CMD_SET_REG, + NL80211_CMD_REQ_SET_REG, + + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ __NL80211_CMD_AFTER_LAST, @@ -197,10 +214,21 @@ enum nl80211_commands { * info given for %NL80211_CMD_GET_MPATH, nested attribute described at * &enum nl80211_mpath_info. * - * * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of * &enum nl80211_mntr_flags. * + * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the + * current regulatory domain should be set to or is already set to. + * For example, 'CR', for Costa Rica. This attribute is used by the kernel + * to query the CRDA to retrieve one regulatory domain. This attribute can + * also be used by userspace to query the kernel for the currently set + * regulatory domain. We chose an alpha2 as that is also used by the + * IEEE-802.11d country information element to identify a country. + * Users can also simply ask the wireless core to set regulatory domain + * to a specific alpha2. + * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory + * rules. + * * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled * (u8, 0 or 1) @@ -265,6 +293,9 @@ enum nl80211_attrs { NL80211_ATTR_SUPPORTED_IFTYPES, + NL80211_ATTR_REG_ALPHA2, + NL80211_ATTR_REG_RULES, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -278,6 +309,7 @@ enum nl80211_attrs { #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY #define NL80211_MAX_SUPP_RATES 32 +#define NL80211_MAX_SUPP_REG_RULES 32 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 @@ -473,6 +505,66 @@ enum nl80211_bitrate_attr { }; /** + * enum nl80211_reg_rule_attr - regulatory rule attributes + * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional + * considerations for a given frequency range. These are the + * &enum nl80211_reg_rule_flags. + * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory + * rule in KHz. This is not a center of frequency but an actual regulatory + * band edge. + * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule + * in KHz. This is not a center a frequency but an actual regulatory + * band edge. + * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this + * frequency range, in KHz. + * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain + * for a given frequency range. The value is in mBi (100 * dBi). + * If you don't have one then don't send this. + * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for + * a given frequency range. The value is in mBm (100 * dBm). + */ +enum nl80211_reg_rule_attr { + __NL80211_REG_RULE_ATTR_INVALID, + NL80211_ATTR_REG_RULE_FLAGS, + + NL80211_ATTR_FREQ_RANGE_START, + NL80211_ATTR_FREQ_RANGE_END, + NL80211_ATTR_FREQ_RANGE_MAX_BW, + + NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, + NL80211_ATTR_POWER_RULE_MAX_EIRP, + + /* keep last */ + __NL80211_REG_RULE_ATTR_AFTER_LAST, + NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_reg_rule_flags - regulatory rule flags + * + * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed + * @NL80211_RRF_NO_CCK: CCK modulation not allowed + * @NL80211_RRF_NO_INDOOR: indoor operation not allowed + * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed + * @NL80211_RRF_DFS: DFS support is required to be used + * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links + * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links + * @NL80211_RRF_PASSIVE_SCAN: passive scan is required + * @NL80211_RRF_NO_IBSS: no IBSS is allowed + */ +enum nl80211_reg_rule_flags { + NL80211_RRF_NO_OFDM = 1<<0, + NL80211_RRF_NO_CCK = 1<<1, + NL80211_RRF_NO_INDOOR = 1<<2, + NL80211_RRF_NO_OUTDOOR = 1<<3, + NL80211_RRF_DFS = 1<<4, + NL80211_RRF_PTP_ONLY = 1<<5, + NL80211_RRF_PTMP_ONLY = 1<<6, + NL80211_RRF_PASSIVE_SCAN = 1<<7, + NL80211_RRF_NO_IBSS = 1<<8, +}; + +/** * enum nl80211_mntr_flags - monitor configuration flags * * Monitor configuration flags. diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 0a72d1e..f432171 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -287,6 +287,57 @@ struct bss_parameters { int use_short_slot_time; }; +/** + * enum reg_set_by - Indicates who is trying to set the regulatory domain + * @REGDOM_SET_BY_INIT: regulatory domain was set by initialization. We will be + * using a static world regulatory domain by default. + * @REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world regulatory domain. + * @REGDOM_SET_BY_USER: User asked the wireless core to set the + * regulatory domain. + * @REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the wireless core + * it thinks its knows the regulatory domain we should be in. + * @REGDOM_SET_BY_80211D: the wireless core has received an 802.11 country + * information element with regulatory information it thinks we + * should consider. + */ +enum reg_set_by { + REGDOM_SET_BY_INIT, + REGDOM_SET_BY_CORE, + REGDOM_SET_BY_USER, + REGDOM_SET_BY_DRIVER, + REGDOM_SET_BY_80211D, +}; + +struct ieee80211_freq_range { + u32 start_freq; + u32 end_freq; + u32 max_bandwidth; +}; + +struct ieee80211_power_rule { + u32 max_antenna_gain; + u32 max_eirp; +}; + +struct ieee80211_reg_rule { + struct ieee80211_freq_range freq_range; + struct ieee80211_power_rule power_rule; + u32 flags; +}; + +struct ieee80211_regdomain { + u32 n_reg_rules; + char alpha2[2]; + struct ieee80211_reg_rule reg_rules[]; +}; + +#define MHZ_TO_KHZ(freq) (freq * 1000) +#define KHZ_TO_MHZ(freq) (freq / 1000) +#define DBI_TO_MBI(gain) (gain * 100) +#define MBI_TO_DBI(gain) (gain / 100) +#define DBM_TO_MBM(gain) (gain * 100) +#define MBM_TO_DBM(gain) (gain / 100) + /* from net/wireless.h */ struct wiphy; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 7c399a9..c933a49 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -833,6 +833,8 @@ struct ieee80211_hw { s8 max_signal; }; +struct ieee80211_hw *wiphy_to_hw(struct wiphy *wiphy); + /** * SET_IEEE80211_DEV - set device for 802.11 hardware * diff --git a/include/net/wireless.h b/include/net/wireless.h index 1dc8ec3..f6b31d0 100644 --- a/include/net/wireless.h +++ b/include/net/wireless.h @@ -60,6 +60,7 @@ enum ieee80211_channel_flags { * with cfg80211. * * @center_freq: center frequency in MHz + * @max_bandwidth: maximum allowed bandwidth for this channel, in MHz * @hw_value: hardware-specific value for the channel * @flags: channel flags from &enum ieee80211_channel_flags. * @orig_flags: channel flags at registration time, used by regulatory @@ -73,6 +74,7 @@ enum ieee80211_channel_flags { struct ieee80211_channel { enum ieee80211_band band; u16 center_freq; + u8 max_bandwidth; u16 hw_value; u32 flags; int max_antenna_gain; @@ -178,6 +180,7 @@ struct ieee80211_supported_band { * struct wiphy - wireless hardware description * @idx: the wiphy index assigned to this item * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name> + * @reg_notifier: the driver's regulatory notification callback */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -197,6 +200,9 @@ struct wiphy { struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS]; + /* Lets us get back the wiphy on the callback */ + int (*reg_notifier)(struct wiphy *wiphy, enum reg_set_by setby); + /* fields below are read-only, assigned by cfg80211 */ /* the item in /sys/class/ieee80211/ points to this, @@ -322,6 +328,52 @@ extern int ieee80211_frequency_to_channel(int freq); */ extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy, int freq); +/** + * __regulatory_hint - hint to the wireless core a regulatory domain + * @wiphy: if a driver is providing the hint this is the driver's very + * own &struct wiphy + * @alpha2: the ISO/IEC 3166 alpha2 being claimed the regulatory domain + * should be in. If @rd is set this should be NULL + * @rd: a complete regulatory domain, if passed the caller need not worry + * about freeing it + * + * The Wireless subsystem can use this function to hint to the wireless core + * what it believes should be the current regulatory domain by + * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory + * domain should be in or by providing a completely build regulatory domain. + * + * Returns -EALREADY if *a regulatory domain* has already been set. Note that + * this could be by another driver. It is safe for drivers to continue if + * -EALREADY is returned, if drivers are not capable of world roaming they + * should not register more channels than they support. Right now we only + * support listening to the first driver hint. If the driver is capable + * of world roaming but wants to respect its own EEPROM mappings for + * specific regulatory domains it should register the @reg_notifier callback + * on the &struct wiphy. Returns 0 if the hint went through fine or through an + * intersection operation. Otherwise a standard error code is returned. + * + */ +extern int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by, + const char *alpha2, struct ieee80211_regdomain *rd); +/** + * regulatory_hint - driver hint to the wireless core a regulatory domain + * @wiphy: the driver's very own &struct wiphy + * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain + * should be in. If @rd is set this should be NULL + * @rd: a complete regulatory domain provided by the driver. If passed + * the driver does not need to worry about freeing it. + * + * Wireless drivers can use this function to hint to the wireless core + * what it believes should be the current regulatory domain by + * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory + * domain should be in or by providing a completely build regulatory domain. + * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried + * for a regulatory domain structure for the respective country. + * + * See __regulatory_hint() documentation for possible return values. + */ +extern int regulatory_hint(struct wiphy *wiphy, + const char *alpha2, struct ieee80211_regdomain *rd); /** * ieee80211_get_channel - get channel struct from wiphy for specified frequency diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 928813c..5a3bdaa 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -17,6 +17,13 @@ #include "rate.h" #include "mesh.h" +struct ieee80211_hw *wiphy_to_hw(struct wiphy *wiphy) +{ + struct ieee80211_local *local = wiphy_priv(wiphy); + return &local->hw; +} +EXPORT_SYMBOL(wiphy_to_hw); + static enum ieee80211_if_types nl80211_type_to_mac80211_type(enum nl80211_iftype type) { diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig index 833b024..7d8be67 100644 --- a/net/wireless/Kconfig +++ b/net/wireless/Kconfig @@ -14,6 +14,36 @@ config NL80211 If unsure, say Y. +config WIRELESS_OLD_REGULATORY + bool "Old wireless static regulatory defintions" + default n + ---help--- + This option enables the old static regulatory information + and uses it within the new framework. This is available + temporarily as an option to help prevent immediate issues + due to the switch to the new regulatory framework which + does require a new userspace application which has the + database of regulatory information (CRDA) and another for + setting regulatory domains (iw). + + For more information see: + + http://wireless.kernel.org/en/developers/Regulatory/CRDA + http://wireless.kernel.org/en/users/Documentation/iw + + It is important to note though that if you *do* have CRDA present + and if this option is enabled CRDA *will* be called to update the + regulatory domain. This option mainly exists to leave some + old static regulatory domains that were defined and to keep + around the old ieee80211_regdom module parameter. This is being + phased out and you should stop using them. + + Say N unless you cannot install a new userspace application + or have one currently depending on the ieee80211_regdom module + parameter and cannot port it to use the new userspace interfaces. + + This is scheduled for removal for 2.6.29. + config WIRELESS_EXT bool "Wireless extensions" default n diff --git a/net/wireless/core.c b/net/wireless/core.c index 7e995ac..7715cfe 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -13,12 +13,14 @@ #include <linux/debugfs.h> #include <linux/notifier.h> #include <linux/device.h> +#include <linux/list.h> #include <net/genetlink.h> #include <net/cfg80211.h> #include <net/wireless.h> #include "nl80211.h" #include "core.h" #include "sysfs.h" +#include "reg.h" /* name for sysfs, %d is appended */ #define PHY_NAME "phy" @@ -27,6 +29,107 @@ MODULE_AUTHOR("Johannes Berg"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("wireless configuration support"); +struct list_head regulatory_requests; + +/* Central wireless core regulatory domains, we only need two, + * the current one and a world regulatory domain in case we have no + * information to give us an alpha2 */ +struct ieee80211_regdomain *cfg80211_regdomain; + +/* We keep a static world regulatory domain in case of the absence of CRDA */ +const struct ieee80211_regdomain world_regdom = { + .n_reg_rules = 1, + .alpha2 = "00", + .reg_rules = { + REG_RULE(2402, 2472, 40, 6, 20, + NL80211_RRF_PASSIVE_SCAN | + NL80211_RRF_NO_IBSS), + } +}; + +#ifdef CONFIG_WIRELESS_OLD_REGULATORY +/* All this fucking static junk will be removed soon, so + * don't fucking count on it !@#$ */ + +static char *ieee80211_regdom = "US"; +module_param(ieee80211_regdom, charp, 0444); +MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code"); + +/* We assume 40 MHz bandwidth for the old regulatory work. + * We make emphasis we are using the exact same frequencies + * as before */ + +const struct ieee80211_regdomain us_regdom = { + .n_reg_rules = 6, + .alpha2 = "US", + .reg_rules = { + /* IEEE 802.11b/g, channels 1..11 */ + REG_RULE(2412-20, 2462+20, 40, 6, 27, 0), + /* IEEE 802.11a, channel 36 */ + REG_RULE(5180-20, 5180+20, 40, 6, 23, 0), + /* IEEE 802.11a, channel 40 */ + REG_RULE(5200-20, 5200+20, 40, 6, 23, 0), + /* IEEE 802.11a, channel 44 */ + REG_RULE(5220-20, 5220+20, 40, 6, 23, 0), + /* IEEE 802.11a, channels 48..64 */ + REG_RULE(5240-20, 5320+20, 40, 6, 23, 0), + /* IEEE 802.11a, channels 149..165, outdoor */ + REG_RULE(5745-20, 5825+20, 40, 6, 30, 0), + } +}; + +const struct ieee80211_regdomain jp_regdom = { + .n_reg_rules = 3, + .alpha2 = "JP", + .reg_rules = { + /* IEEE 802.11b/g, channels 1..14 */ + REG_RULE(2412-20, 2484+20, 40, 6, 20, 0), + /* IEEE 802.11a, channels 34..48 */ + REG_RULE(5170-20, 5240+20, 40, 6, 20, + NL80211_RRF_PASSIVE_SCAN), + /* IEEE 802.11a, channels 52..64 */ + REG_RULE(5260-20, 5320+20, 40, 6, 20, + NL80211_RRF_NO_IBSS | + NL80211_RRF_DFS), + } +}; + +const struct ieee80211_regdomain eu_regdom = { + .n_reg_rules = 6, + /* This alpha2 is bogus, we leave it here just for stupid + * backward compatibility */ + .alpha2 = "EU", + .reg_rules = { + /* IEEE 802.11b/g, channels 1..13 */ + REG_RULE(2412-20, 2472+20, 40, 6, 20, 0), + /* IEEE 802.11a, channel 36 */ + REG_RULE(5180-20, 5180+20, 40, 6, 23, + NL80211_RRF_PASSIVE_SCAN), + /* IEEE 802.11a, channel 40 */ + REG_RULE(5200-20, 5200+20, 40, 6, 23, + NL80211_RRF_PASSIVE_SCAN), + /* IEEE 802.11a, channel 44 */ + REG_RULE(5220-20, 5220+20, 40, 6, 23, + NL80211_RRF_PASSIVE_SCAN), + /* IEEE 802.11a, channels 48..64 */ + REG_RULE(5240-20, 5320+20, 40, 6, 20, + NL80211_RRF_NO_IBSS | + NL80211_RRF_DFS), + /* IEEE 802.11a, channels 100..140 */ + REG_RULE(5500-20, 5700+20, 40, 6, 30, + NL80211_RRF_NO_IBSS | + NL80211_RRF_DFS), + } +}; + +#endif + +struct ieee80211_regdomain *cfg80211_world_regdom = + (struct ieee80211_regdomain *) &world_regdom; + +LIST_HEAD(regulatory_requests); +DEFINE_MUTEX(cfg80211_reg_mutex); + /* RCU might be appropriate here since we usually * only read the list, and that can happen quite * often because we need to do it for each command */ @@ -302,7 +405,9 @@ int wiphy_register(struct wiphy *wiphy) ieee80211_set_bitrate_flags(wiphy); /* set up regulatory info */ - wiphy_update_regulatory(wiphy); + mutex_lock(&cfg80211_reg_mutex); + wiphy_update_regulatory(wiphy, REGDOM_SET_BY_CORE); + mutex_unlock(&cfg80211_reg_mutex); mutex_lock(&cfg80211_drv_mutex); @@ -409,9 +514,15 @@ static struct notifier_block cfg80211_netdev_notifier = { .notifier_call = cfg80211_netdev_notifier_call, }; + static int cfg80211_init(void) { - int err = wiphy_sysfs_init(); + int err; + + cfg80211_regdomain = + (struct ieee80211_regdomain *) cfg80211_world_regdom; + + err = wiphy_sysfs_init(); if (err) goto out_fail_sysfs; @@ -425,8 +536,28 @@ static int cfg80211_init(void) ieee80211_debugfs_dir = debugfs_create_dir("ieee80211", NULL); + err = regulatory_init(); + if (err) + goto out_fail_reg; + +#ifdef CONFIG_WIRELESS_OLD_REGULATORY + /* The old code still requests for a new regdomain and if + * you have CRDA you get it updated, otherwise you get + * stuck with the static values */ + err = __regulatory_hint(NULL, REGDOM_SET_BY_CORE, + ieee80211_regdom, NULL); +#else + err = __regulatory_hint(NULL, REGDOM_SET_BY_CORE, "00", NULL); +#endif + if (err) + printk(KERN_ERR "cfg80211: calling CRDA failed - " + "unable to update world regulatory domain, " + "using static definition\n"); + return 0; +out_fail_reg: + debugfs_remove(ieee80211_debugfs_dir); out_fail_nl80211: unregister_netdevice_notifier(&cfg80211_netdev_notifier); out_fail_notifier: @@ -434,6 +565,7 @@ out_fail_notifier: out_fail_sysfs: return err; } + subsys_initcall(cfg80211_init); static void cfg80211_exit(void) @@ -442,5 +574,6 @@ static void cfg80211_exit(void) nl80211_exit(); unregister_netdevice_notifier(&cfg80211_netdev_notifier); wiphy_sysfs_exit(); + regulatory_exit(); } module_exit(cfg80211_exit); diff --git a/net/wireless/core.h b/net/wireless/core.h index 7a02c35..771cc5c 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -79,6 +79,6 @@ extern int cfg80211_dev_rename(struct cfg80211_registered_device *drv, char *newname); void ieee80211_set_bitrate_flags(struct wiphy *wiphy); -void wiphy_update_regulatory(struct wiphy *wiphy); +void wiphy_update_regulatory(struct wiphy *wiphy, enum reg_set_by setby); #endif /* __NET_WIRELESS_CORE_H */ diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 77880ba..4874153 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -18,6 +18,7 @@ #include <net/cfg80211.h> #include "core.h" #include "nl80211.h" +#include "reg.h" /* the netlink family */ static struct genl_family nl80211_fam = { @@ -88,6 +89,9 @@ static struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] __read_mostly = { .len = IEEE80211_MAX_MESH_ID_LEN }, [NL80211_ATTR_MPATH_NEXT_HOP] = { .type = NLA_U32 }, + [NL80211_ATTR_REG_ALPHA2] = { .type = NLA_STRING, .len = 2 }, + [NL80211_ATTR_REG_RULES] = { .type = NLA_NESTED }, + [NL80211_ATTR_BSS_CTS_PROT] = { .type = NLA_U8 }, [NL80211_ATTR_BSS_SHORT_PREAMBLE] = { .type = NLA_U8 }, [NL80211_ATTR_BSS_SHORT_SLOT_TIME] = { .type = NLA_U8 }, @@ -1599,6 +1603,130 @@ static int nl80211_set_bss(struct sk_buff *skb, struct genl_info *info) return err; } +static const struct nla_policy + reg_rule_policy[NL80211_REG_RULE_ATTR_MAX + 1] = { + [NL80211_ATTR_REG_RULE_FLAGS] = { .type = NLA_U32 }, + [NL80211_ATTR_FREQ_RANGE_START] = { .type = NLA_U32 }, + [NL80211_ATTR_FREQ_RANGE_END] = { .type = NLA_U32 }, + [NL80211_ATTR_FREQ_RANGE_MAX_BW] = { .type = NLA_U32 }, + [NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN] = { .type = NLA_U32 }, + [NL80211_ATTR_POWER_RULE_MAX_EIRP] = { .type = NLA_U32 }, +}; + +static int parse_reg_rule(struct nlattr *tb[], + struct ieee80211_reg_rule *reg_rule) +{ + struct ieee80211_freq_range *freq_range = ®_rule->freq_range; + struct ieee80211_power_rule *power_rule = ®_rule->power_rule; + + if (!tb[NL80211_ATTR_REG_RULE_FLAGS]) + return -EINVAL; + if (!tb[NL80211_ATTR_FREQ_RANGE_START]) + return -EINVAL; + if (!tb[NL80211_ATTR_FREQ_RANGE_END]) + return -EINVAL; + if (!tb[NL80211_ATTR_FREQ_RANGE_MAX_BW]) + return -EINVAL; + if (!tb[NL80211_ATTR_POWER_RULE_MAX_EIRP]) + return -EINVAL; + + reg_rule->flags = nla_get_u32(tb[NL80211_ATTR_REG_RULE_FLAGS]); + + freq_range->start_freq = + nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_START]); + freq_range->end_freq = + nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_END]); + freq_range->max_bandwidth = + nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_MAX_BW]); + + power_rule->max_eirp = + nla_get_u32(tb[NL80211_ATTR_POWER_RULE_MAX_EIRP]); + + if (tb[NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN]) + power_rule->max_antenna_gain = + nla_get_u32(tb[NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN]); + + return 0; +} + +static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info) +{ + char *data = NULL; + + if (!info->attrs[NL80211_ATTR_REG_ALPHA2]) + return -EINVAL; + + data = nla_data(info->attrs[NL80211_ATTR_REG_ALPHA2]); + + return __regulatory_hint(NULL, REGDOM_SET_BY_USER, data, NULL); +} + +static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info) +{ + struct nlattr *tb[NL80211_REG_RULE_ATTR_MAX + 1]; + struct nlattr *nl_reg_rule; + char *alpha2 = NULL; + int rem_reg_rules = 0, r = 0; + u32 num_rules = 0, rule_idx = 0, size_of_regd; + struct ieee80211_regdomain *rd = NULL; + + if (!info->attrs[NL80211_ATTR_REG_ALPHA2]) + return -EINVAL; + + if (!info->attrs[NL80211_ATTR_REG_RULES]) + return -EINVAL; + + alpha2 = nla_data(info->attrs[NL80211_ATTR_REG_ALPHA2]); + + nla_for_each_nested(nl_reg_rule, info->attrs[NL80211_ATTR_REG_RULES], + rem_reg_rules) { + num_rules++; + if (num_rules > NL80211_MAX_SUPP_REG_RULES) + goto bad_reg; + } + + if (!reg_is_valid_request(alpha2)) + return -EINVAL; + + size_of_regd = sizeof(struct ieee80211_regdomain) + + (num_rules * sizeof(struct ieee80211_reg_rule)); + + rd = kzalloc(size_of_regd, GFP_KERNEL); + if (!rd) + return -ENOMEM; + + rd->n_reg_rules = num_rules; + rd->alpha2[0] = alpha2[0]; + rd->alpha2[1] = alpha2[1]; + + nla_for_each_nested(nl_reg_rule, info->attrs[NL80211_ATTR_REG_RULES], + rem_reg_rules) { + nla_parse(tb, NL80211_REG_RULE_ATTR_MAX, + nla_data(nl_reg_rule), nla_len(nl_reg_rule), + reg_rule_policy); + r = parse_reg_rule(tb, &rd->reg_rules[rule_idx]); + if (r) + goto bad_reg; + + rule_idx++; + + if (rule_idx > NL80211_MAX_SUPP_REG_RULES) + goto bad_reg; + } + + BUG_ON(rule_idx != num_rules); + + r = set_regdom(rd); + if (r) + goto bad_reg; + + return r; + +bad_reg: + kfree(rd); + return -EINVAL; +} + static struct genl_ops nl80211_ops[] = { { .cmd = NL80211_CMD_GET_WIPHY, @@ -1736,6 +1864,18 @@ static struct genl_ops nl80211_ops[] = { .policy = nl80211_policy, .flags = GENL_ADMIN_PERM, }, + { + .cmd = NL80211_CMD_SET_REG, + .doit = nl80211_set_reg, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + }, + { + .cmd = NL80211_CMD_REQ_SET_REG, + .doit = nl80211_req_set_reg, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + }, }; /* multicast groups */ diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 855bff4..287c973 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2,179 +2,605 @@ * Copyright 2002-2005, Instant802 Networks, Inc. * Copyright 2005-2006, Devicescape Software, Inc. * Copyright 2007 Johannes Berg <johannes@xxxxxxxxxxxxxxxx> + * Copyright 2008 Luis R. Rodriguez <lrodriguz@xxxxxxxxxxx> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/* - * This regulatory domain control implementation is highly incomplete, it - * only exists for the purpose of not regressing mac80211. - * - * For now, drivers can restrict the set of allowed channels by either - * not registering those channels or setting the IEEE80211_CHAN_DISABLED - * flag; that flag will only be *set* by this code, never *cleared. +/** + * DOC: Wireless regulatory infrastructure * * The usual implementation is for a driver to read a device EEPROM to * determine which regulatory domain it should be operating under, then * looking up the allowable channels in a driver-local table and finally * registering those channels in the wiphy structure. * - * Alternatively, drivers that trust the regulatory domain control here - * will register a complete set of capabilities and the control code - * will restrict the set by setting the IEEE80211_CHAN_* flags. + * Another set of compliance enforcement is for drivers to use their + * own compliance limits which can be stored on the EEPROM. The host + * driver or firmware may ensure these are used. + * + * In addition to all this we provide an extra layer of regulatory + * conformance. For drivers which do not have any regulatory + * information CRDA provides the complete regulatory solution. + * For others it provides a community effort on further restrictions + * to enhance compliance. + * + * Note: When number of rules --> infinity we will not be able to + * index on alpha2 any more, instead we'll probably have to + * rely on some SHA1 checksum of the regdomain for example. + * */ #include <linux/kernel.h> +#include <linux/list.h> +#include <linux/random.h> +#include <linux/nl80211.h> +#include <linux/platform_device.h> #include <net/wireless.h> +#include <net/cfg80211.h> #include "core.h" +#include "reg.h" -static char *ieee80211_regdom = "US"; -module_param(ieee80211_regdom, charp, 0444); -MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code"); +/* To trigger userspace events */ +static struct platform_device *reg_pdev; -struct ieee80211_channel_range { - short start_freq; - short end_freq; - int max_power; - int max_antenna_gain; - u32 flags; +/* Keep the ordering from large to small */ +static u32 supported_bandwidths[] = { + MHZ_TO_KHZ(40), + MHZ_TO_KHZ(20), }; -struct ieee80211_regdomain { - const char *code; - const struct ieee80211_channel_range *ranges; - int n_ranges; -}; +static int is_world_regdom(char *alpha2) +{ + if (!alpha2) + return 0; + if (alpha2[0] == '0' && alpha2[1] == '0') + return 1; + return 0; +} -#define RANGE_PWR(_start, _end, _pwr, _ag, _flags) \ - { _start, _end, _pwr, _ag, _flags } +static int is_alpha2_set(char *alpha2) +{ + if (!alpha2) + return 0; + if (alpha2[0] != 0 && alpha2[1] != 0) + return 1; + return 0; +} +static int is_alpha_upper(char letter) +{ + /* ASCII A - Z */ + if (letter >= 65 && letter <= 90) + return 1; + return 0; +} -/* - * Ideally, in the future, these definitions will be loaded from a - * userspace table via some daemon. - */ -static const struct ieee80211_channel_range ieee80211_US_channels[] = { - /* IEEE 802.11b/g, channels 1..11 */ - RANGE_PWR(2412, 2462, 27, 6, 0), - /* IEEE 802.11a, channel 36*/ - RANGE_PWR(5180, 5180, 23, 6, 0), - /* IEEE 802.11a, channel 40*/ - RANGE_PWR(5200, 5200, 23, 6, 0), - /* IEEE 802.11a, channel 44*/ - RANGE_PWR(5220, 5220, 23, 6, 0), - /* IEEE 802.11a, channels 48..64 */ - RANGE_PWR(5240, 5320, 23, 6, 0), - /* IEEE 802.11a, channels 149..165, outdoor */ - RANGE_PWR(5745, 5825, 30, 6, 0), -}; +static int is_an_alpha2(char *alpha2) +{ + if (!alpha2) + return 0; + if (is_alpha_upper(alpha2[0]) && is_alpha_upper(alpha2[1])) + return 1; + return 0; +} -static const struct ieee80211_channel_range ieee80211_JP_channels[] = { - /* IEEE 802.11b/g, channels 1..14 */ - RANGE_PWR(2412, 2484, 20, 6, 0), - /* IEEE 802.11a, channels 34..48 */ - RANGE_PWR(5170, 5240, 20, 6, IEEE80211_CHAN_PASSIVE_SCAN), - /* IEEE 802.11a, channels 52..64 */ - RANGE_PWR(5260, 5320, 20, 6, IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_RADAR), -}; +static int alpha2_equal(char *alpha2_x, char *alpha2_y) +{ + if (!alpha2_x || !alpha2_y) + return 0; + if (alpha2_x[0] == alpha2_y[0] && + alpha2_x[1] == alpha2_y[1]) + return 1; + return 0; +} -static const struct ieee80211_channel_range ieee80211_EU_channels[] = { - /* IEEE 802.11b/g, channels 1..13 */ - RANGE_PWR(2412, 2472, 20, 6, 0), - /* IEEE 802.11a, channel 36*/ - RANGE_PWR(5180, 5180, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN), - /* IEEE 802.11a, channel 40*/ - RANGE_PWR(5200, 5200, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN), - /* IEEE 802.11a, channel 44*/ - RANGE_PWR(5220, 5220, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN), - /* IEEE 802.11a, channels 48..64 */ - RANGE_PWR(5240, 5320, 23, 6, IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_RADAR), - /* IEEE 802.11a, channels 100..140 */ - RANGE_PWR(5500, 5700, 30, 6, IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_RADAR), -}; +static int regdom_changed(char *alpha2) +{ + if (!cfg80211_regdomain) + return 1; + if (alpha2_equal(cfg80211_regdomain->alpha2, alpha2)) + return 0; + return 1; +} + +/* This lets us keep regulatory code, which is updated on a regulatory + * basis to userspace. */ +static int call_crda(const char *alpha2) +{ + char country_env[9 + 2] = "COUNTRY="; + char *envp[] = { + country_env, + NULL + }; + + if (!is_world_regdom((char *) alpha2)) + printk(KERN_INFO "cfg80211: Calling CRDA for country: %c%c\n", + alpha2[0], alpha2[1]); + else + printk(KERN_INFO "cfg80211: Calling CRDA to update world " + "regulatory domain\n"); + + country_env[8] = alpha2[0]; + country_env[9] = alpha2[1]; + + return kobject_uevent_env(®_pdev->dev.kobj, KOBJ_CHANGE, envp); +} + +/* This has the logic which determines when a new request + * should be ignored. Must hold cfg80211_reg_mutex */ +static int ignore_request(struct wiphy *wiphy, enum reg_set_by set_by, + char *alpha2, struct ieee80211_regdomain *rd) +{ + struct regulatory_request *last_request = NULL; -#define REGDOM(_code) \ - { \ - .code = __stringify(_code), \ - .ranges = ieee80211_ ##_code## _channels, \ - .n_ranges = ARRAY_SIZE(ieee80211_ ##_code## _channels), \ + /* All initial requests are respected */ + if (list_empty(®ulatory_requests)) + return 0; + + last_request = list_first_entry(®ulatory_requests, + struct regulatory_request, list); + + switch (set_by) { + case REGDOM_SET_BY_INIT: + return -EINVAL; + case REGDOM_SET_BY_CORE: + /* Always respect new wireless core hints, should only + * come in for updating the world regulatory domain at init + * anyway */ + return 0; + case REGDOM_SET_BY_80211D: + if (last_request->initiator == set_by) { + if (last_request->wiphy != wiphy) { + /* Two cards with two APs claiming different + * different Country IE alpha2s! + * You're special!! */ + if (!alpha2_equal(last_request->alpha2, + cfg80211_regdomain->alpha2)) { + /* XXX: Deal with conflict, consider + * building a new one out of the + * intersection */ + WARN_ON(1); + return -EOPNOTSUPP; + } + return -EALREADY; + } + /* Two consecutive Country IE hints on the same wiphy */ + if (!alpha2_equal(cfg80211_regdomain->alpha2, alpha2)) + return 0; + return -EALREADY; + } + if (WARN_ON(!is_alpha2_set(alpha2) || !is_an_alpha2(alpha2)), + "Invalid Country IE regulatory hint passed " + "to the wireless core\n") + return -EINVAL; + /* We ignore Country IE hints for now, as we haven't yet + * added the dot11MultiDomainCapabilityEnabled flag + * for wiphys */ + return 1; + case REGDOM_SET_BY_DRIVER: + BUG_ON(!wiphy); + if (last_request->initiator == set_by) { + /* Two separate drivers hinting different things, + * this is possible if you have two devices present + * on a system with different EEPROM regulatory + * readings. XXX: Do intersection, we support only + * the first regulatory hint for now */ + if (last_request->wiphy != wiphy) + return -EALREADY; + if (rd) + return -EALREADY; + /* Driver should not be trying to hint different + * regulatory domains! */ + BUG_ON(!alpha2_equal(alpha2, + cfg80211_regdomain->alpha2)); + return -EALREADY; + } + if (last_request->initiator == REGDOM_SET_BY_CORE) + return 0; + /* XXX: Handle intersection, and add the + * dot11MultiDomainCapabilityEnabled flag to wiphy. For now + * we assume the driver has this set to false, following the + * 802.11d dot11MultiDomainCapabilityEnabled documentation */ + if (last_request->initiator == REGDOM_SET_BY_80211D) + return 0; + return 0; + case REGDOM_SET_BY_USER: + if (last_request->initiator == set_by || + last_request->initiator == REGDOM_SET_BY_CORE) + return 0; + /* Drivers can use their wiphy's reg_notifier() + * to override any information */ + if (last_request->initiator == REGDOM_SET_BY_DRIVER) + return 0; + /* XXX: Handle intersection */ + if (last_request->initiator == REGDOM_SET_BY_80211D) + return -EOPNOTSUPP; + return 0; + default: + return -EINVAL; } +} -static const struct ieee80211_regdomain ieee80211_regdoms[] = { - REGDOM(US), - REGDOM(JP), - REGDOM(EU), -}; +/* If a wiphy is passed the caller hold &cfg80211_drv_mutex */ +int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by, + const char *alpha2, struct ieee80211_regdomain *rd) +{ + struct regulatory_request *request; + char *rd_alpha2; + int r = 0; + mutex_lock(&cfg80211_reg_mutex); + r = ignore_request(wiphy, set_by, (char *) alpha2, rd); + if (r) { + mutex_unlock(&cfg80211_reg_mutex); + return r; + } + mutex_unlock(&cfg80211_reg_mutex); -static const struct ieee80211_regdomain *get_regdom(void) + if (rd) + rd_alpha2 = rd->alpha2; + else + rd_alpha2 = (char *) alpha2; + + switch (set_by) { + case REGDOM_SET_BY_CORE: + case REGDOM_SET_BY_80211D: + case REGDOM_SET_BY_DRIVER: + case REGDOM_SET_BY_USER: + request = kzalloc(sizeof(struct regulatory_request), + GFP_KERNEL); + if (!request) + return -ENOMEM; + + request->alpha2[0] = rd_alpha2[0]; + request->alpha2[1] = rd_alpha2[1]; + request->initiator = set_by; + request->wiphy = wiphy; + + mutex_lock(&cfg80211_reg_mutex); + list_add_tail(&request->list, ®ulatory_requests); + mutex_unlock(&cfg80211_reg_mutex); + if (rd) { + mutex_lock(&cfg80211_reg_mutex); + r = set_regdom(rd); + mutex_unlock(&cfg80211_reg_mutex); + if (r) + printk(KERN_ERR "cfg80211: Failed setting " + "regulatory domain\n"); + } else { + r = call_crda(alpha2); + if (r) + printk(KERN_ERR "cfg80211: Failed " + "calling CRDA\n"); + } + return r; + default: + return -ENOTSUPP; + } +} + +int regulatory_hint(struct wiphy *wiphy, const char *alpha2, + struct ieee80211_regdomain *rd) { - static const struct ieee80211_channel_range - ieee80211_world_channels[] = { - /* IEEE 802.11b/g, channels 1..11 */ - RANGE_PWR(2412, 2462, 27, 6, 0), - }; - static const struct ieee80211_regdomain regdom_world = REGDOM(world); - int i; + int r; + BUG_ON(!rd && !alpha2); + mutex_lock(&cfg80211_drv_mutex); + r = __regulatory_hint(wiphy, REGDOM_SET_BY_DRIVER, alpha2, rd); + mutex_unlock(&cfg80211_drv_mutex); + return r; +} +EXPORT_SYMBOL(regulatory_hint); + +/* caller must lock cfg80211_reg_mutex */ +static int __reg_is_valid_request(char *alpha2, + struct regulatory_request **request) +{ + struct regulatory_request *req; + if (list_empty(®ulatory_requests)) + return 0; + list_for_each_entry(req, ®ulatory_requests, list) { + if (alpha2_equal(req->alpha2, alpha2)) { + *request = req; + return 1; + } + } + return 0; +} - for (i = 0; i < ARRAY_SIZE(ieee80211_regdoms); i++) - if (strcmp(ieee80211_regdom, ieee80211_regdoms[i].code) == 0) - return &ieee80211_regdoms[i]; +/* Used by nl80211 before kmalloc'ing our regulatory domain */ +int reg_is_valid_request(char *alpha2) +{ + struct regulatory_request *request = NULL; + int r; + mutex_lock(&cfg80211_reg_mutex); + r = __reg_is_valid_request(alpha2, &request); + mutex_unlock(&cfg80211_reg_mutex); + return r; +} - return ®dom_world; +static u32 freq_max_bandwidth(const struct ieee80211_freq_range *freq_range, + u32 freq) +{ + unsigned int i; + for (i = 0; i < ARRAY_SIZE(supported_bandwidths); i++) { + u32 start_freq = freq - supported_bandwidths[i]/2; + u32 end_freq = freq + supported_bandwidths[i]/2; + if (start_freq >= freq_range->start_freq && + end_freq <= freq_range->end_freq) + return supported_bandwidths[i]; + } + return 0; } +/* XXX: add support for the rest of enum nl80211_reg_rule_flags, we may + * want to just have the channel structure use these */ +static u32 map_regdom_flags(u32 rd_flags) +{ + u32 channel_flags = 0; + if (rd_flags & NL80211_RRF_PASSIVE_SCAN) + channel_flags |= IEEE80211_CHAN_PASSIVE_SCAN; + if (rd_flags & NL80211_RRF_NO_IBSS) + channel_flags |= IEEE80211_CHAN_NO_IBSS; + if (rd_flags & NL80211_RRF_DFS) + channel_flags |= IEEE80211_CHAN_RADAR; + return channel_flags; +} -static void handle_channel(struct ieee80211_channel *chan, - const struct ieee80211_regdomain *rd) +/** + * freq_reg_info - get regulatory information for the given frequency + * @center_freq: Frequency in KHz for which we want regulatory information for + * @bandwidth: the bandwidth requirement you have in KHz, if you do not have one + * you can set this to 0. If this frequency is allowed we then set + * this value to the maximum allowed bandwidth. + * @reg_rule: the regulatory rule which we have for this frequency + * + * Use this function to get the regulatory rule for a specific frequency. + */ +static int freq_reg_info(u32 center_freq, u32 *bandwidth, + const struct ieee80211_reg_rule **reg_rule) { int i; - u32 flags = chan->orig_flags; - const struct ieee80211_channel_range *rg = NULL; + u32 max_bandwidth = 0; - for (i = 0; i < rd->n_ranges; i++) { - if (rd->ranges[i].start_freq <= chan->center_freq && - chan->center_freq <= rd->ranges[i].end_freq) { - rg = &rd->ranges[i]; + if (!cfg80211_regdomain) + return -EINVAL; + + for (i = 0; i < cfg80211_regdomain->n_reg_rules; i++) { + const struct ieee80211_reg_rule *rr; + const struct ieee80211_freq_range *fr = NULL; + const struct ieee80211_power_rule *pr = NULL; + + rr = &cfg80211_regdomain->reg_rules[i]; + fr = &rr->freq_range; + pr = &rr->power_rule; + max_bandwidth = freq_max_bandwidth(fr, center_freq); + if (max_bandwidth && *bandwidth <= max_bandwidth) { + *reg_rule = rr; + *bandwidth = max_bandwidth; break; } } - if (!rg) { - /* not found */ + return !max_bandwidth; +} + +static void handle_channel(struct ieee80211_channel *chan) +{ + int r; + u32 flags = chan->orig_flags; + u32 max_bandwidth = 0; + const struct ieee80211_reg_rule *reg_rule = NULL; + const struct ieee80211_power_rule *power_rule = NULL; + + r = freq_reg_info(MHZ_TO_KHZ(chan->center_freq), + &max_bandwidth, ®_rule); + + if (r) { flags |= IEEE80211_CHAN_DISABLED; chan->flags = flags; return; } - chan->flags = flags; + power_rule = ®_rule->power_rule; + + chan->flags = flags | map_regdom_flags(reg_rule->flags); chan->max_antenna_gain = min(chan->orig_mag, - rg->max_antenna_gain); + (int) MBI_TO_DBI(power_rule->max_antenna_gain)); + chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth); if (chan->orig_mpwr) - chan->max_power = min(chan->orig_mpwr, rg->max_power); + chan->max_power = min(chan->orig_mpwr, + (int) MBM_TO_DBM(power_rule->max_eirp)); else - chan->max_power = rg->max_power; + chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp); } -static void handle_band(struct ieee80211_supported_band *sband, - const struct ieee80211_regdomain *rd) +static void handle_band(struct ieee80211_supported_band *sband) { int i; for (i = 0; i < sband->n_channels; i++) - handle_channel(&sband->channels[i], rd); + handle_channel(&sband->channels[i]); } -void wiphy_update_regulatory(struct wiphy *wiphy) +/* requires cfg80211_drv_mutex *and* cfg80211_reg_mutex to be held */ +static void update_all_wiphy_regulatory(enum reg_set_by setby) { - enum ieee80211_band band; - const struct ieee80211_regdomain *rd = get_regdom(); + struct cfg80211_registered_device *drv; + + list_for_each_entry(drv, &cfg80211_drv_list, list) + wiphy_update_regulatory(&drv->wiphy, setby); +} - for (band = 0; band < IEEE80211_NUM_BANDS; band++) +/* requires cfg80211_reg_mutex lock */ +void wiphy_update_regulatory(struct wiphy *wiphy, enum reg_set_by setby) +{ + enum ieee80211_band band; + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { if (wiphy->bands[band]) - handle_band(wiphy->bands[band], rd); + handle_band(wiphy->bands[band]); + if (wiphy->reg_notifier) + wiphy->reg_notifier(wiphy, setby); + } +} + +static void print_regdomain(struct ieee80211_regdomain *rd) +{ + unsigned int i; + struct ieee80211_reg_rule *reg_rule = NULL; + struct ieee80211_freq_range *freq_range = NULL; + struct ieee80211_power_rule *power_rule = NULL; + + if (is_world_regdom(rd->alpha2)) + printk(KERN_INFO "cfg80211: World regulatory " + "domain updated:\n"); + else + printk(KERN_INFO "cfg80211: Regulatory domain changed to " + "country: %c%c\n", rd->alpha2[0], rd->alpha2[1]); + + for (i = 0; i < rd->n_reg_rules; i++) { + reg_rule = &rd->reg_rules[i]; + freq_range = ®_rule->freq_range; + power_rule = ®_rule->power_rule; + + printk(KERN_INFO "\t(%d KHz - %d KHz @ %d KHz), " + "(%d mBi, %d mBm)\n", + freq_range->start_freq, + freq_range->end_freq, + freq_range->max_bandwidth, + power_rule->max_antenna_gain, + power_rule->max_eirp); + } +} + +static void reset_regdomains(void) +{ + + if (cfg80211_world_regdom && cfg80211_world_regdom != &world_regdom) { + if (cfg80211_world_regdom == cfg80211_regdomain) { + kfree(cfg80211_regdomain); + } else { + kfree(cfg80211_world_regdom); + kfree(cfg80211_regdomain); + } + } else if (cfg80211_regdomain && cfg80211_regdomain != &world_regdom) + kfree(cfg80211_regdomain); + + cfg80211_world_regdom = (struct ieee80211_regdomain *) &world_regdom; + cfg80211_regdomain = NULL; +} + +/* Dynamic world regulatory domain requested by the wireless + * core upon initialization */ +static void update_world_regdomain(struct ieee80211_regdomain *rd) +{ + BUG_ON(list_empty(®ulatory_requests)); + + reset_regdomains(); + + cfg80211_world_regdom = rd; + cfg80211_regdomain = rd; + + print_regdomain(rd); + + mutex_lock(&cfg80211_drv_mutex); + update_all_wiphy_regulatory(REGDOM_SET_BY_INIT); + mutex_unlock(&cfg80211_drv_mutex); +} + +/* caller must hold cfg80211_reg_mutex + * + * Use this call to set the current regulatory + * domain. For now we only consider the first request. Conflicts with multiple + * drivers can be ironed out later. Caller must've already kmalloc'd + * the rd structure */ +int set_regdom(struct ieee80211_regdomain *rd) +{ + struct regulatory_request *request = NULL; + int r = 0; + + /* Some basic sanity checks first */ + + if (is_world_regdom(rd->alpha2)) { + mutex_lock(&cfg80211_reg_mutex); + if (WARN_ON(!__reg_is_valid_request(rd->alpha2, &request))) + mutex_unlock(&cfg80211_reg_mutex); + update_world_regdomain(rd); + list_del(&request->list); + mutex_unlock(&cfg80211_reg_mutex); + return r; + } + + if (!is_alpha2_set(rd->alpha2) || !is_an_alpha2(rd->alpha2)) + return -EINVAL; + + mutex_lock(&cfg80211_reg_mutex); + + if (list_empty(®ulatory_requests)) { + r = -EINVAL; + goto unlock_and_exit; + } + + if (!regdom_changed(rd->alpha2)) { + r = -EINVAL; + goto unlock_and_exit; + } + + /* Now lets set the regulatory domain, update all driver channels + * and finally inform them of what we have done, in case they want + * to review or adjust their own settings based on their own + * internal EEPROM data */ + + if (WARN_ON(!__reg_is_valid_request(rd->alpha2, &request))) { + r = -EINVAL; + goto unlock_and_exit; + } + + reset_regdomains(); + + /* User setting and Country IE parsing coming soon */ + switch (request->initiator) { + case REGDOM_SET_BY_CORE: + case REGDOM_SET_BY_DRIVER: + case REGDOM_SET_BY_USER: + break; + case REGDOM_SET_BY_80211D: + default: + r = -EOPNOTSUPP; + goto unlock_and_exit; + } + + cfg80211_regdomain = rd; + print_regdomain(rd); + + request->granted = 1; + + /* update all wiphys first */ + mutex_lock(&cfg80211_drv_mutex); + update_all_wiphy_regulatory(request->initiator); + mutex_unlock(&cfg80211_drv_mutex); + +unlock_and_exit: + mutex_unlock(&cfg80211_reg_mutex); + return r; +} + +int regulatory_init(void) +{ + reg_pdev = platform_device_register_simple("regulatory", 0, NULL, 0); + if (IS_ERR(reg_pdev)) + return PTR_ERR(reg_pdev); + return 0; +} + +void regulatory_exit(void) +{ + struct regulatory_request *req, *req_tmp; + reset_regdomains(); + list_for_each_entry_safe(req, req_tmp, ®ulatory_requests, list) { + list_del(&req->list); + kfree(req); + } + platform_device_unregister(reg_pdev); } diff --git a/net/wireless/reg.h b/net/wireless/reg.h new file mode 100644 index 0000000..c305127 --- /dev/null +++ b/net/wireless/reg.h @@ -0,0 +1,44 @@ +#ifndef __NET_WIRELESS_REG_H +#define __NET_WIRELESS_REG_H + +extern const struct ieee80211_regdomain world_regdom; +extern struct ieee80211_regdomain *cfg80211_regdomain; +extern struct ieee80211_regdomain *cfg80211_world_regdom; +extern struct mutex cfg80211_reg_mutex; +extern struct list_head regulatory_requests; + +struct regdom_last_setby { + struct wiphy *wiphy; + u8 initiator; +}; + +/* wiphy is set if this request's initiator is REGDOM_SET_BY_DRIVER */ +struct regulatory_request { + struct list_head list; + struct wiphy *wiphy; + int granted; + enum reg_set_by initiator; + char alpha2[2]; +}; + +int reg_is_valid_request(char *alpha2); +int set_regdom(struct ieee80211_regdomain *rd); +int __regulatory_hint_alpha2(struct wiphy *wiphy, enum reg_set_by set_by, + const char *alpha2); + +int regulatory_init(void); +void regulatory_exit(void); + +#define REG_RULE(start, end, bw, gain, eirp, reg_flags) { \ + .freq_range.start_freq = start * 100, \ + .freq_range.end_freq = end * 100, \ + .freq_range.max_bandwidth = bw * 100, \ + .power_rule.max_antenna_gain = gain * 100, \ + .power_rule.max_eirp = eirp * 100, \ + .flags = reg_flags, \ + } + +/* If a char is A-Z */ +#define IS_ALPHA(letter) (letter >= 65 && letter <= 90) + +#endif /* __NET_WIRELESS_REG_H */ -- 1.5.6.rc2.15.g457bb.dirty -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
