This subnode can be used to set per-rate tx power limits either per
country code / regdomain or globally.
These limits are typically provided by the device manufacturers and are
used to limit sideband emissions and stay within regulatory limits
Co-developed-by: Shayne Chen <shayne.chen@xxxxxxxxxxxx>
Signed-off-by: Felix Fietkau <nbd@xxxxxxxx>
Signed-off-by: Shayne Chen <shayne.chen@xxxxxxxxxxxx>
---
v2:
- merge 802.11ax rate changes from Shayne's patch
- document txs-delta property
.../bindings/net/wireless/mediatek,mt76.txt | 59 +++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
index ab7e7a00e534..e4859c974ef4 100644
--- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
+++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
@@ -36,6 +36,7 @@ Optional nodes:
- led: Properties for a connected LED
Optional properties:
- led-sources: See Documentation/devicetree/bindings/leds/common.txt
+- power-limits: contains per-regdomain/channel rate power limit subnodes
&pcie {
pcie0 {
@@ -76,3 +77,61 @@ wmac: wmac@18000000 {
power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
};
+
+
+Subnodes of power-limits:
+
+Properties:
+- country: One or more country codes, as used by the cfg80211 regdomain code
+- regdomain: "FCC", "ETSI" or "JP"
+
+If neither country, nor regdomain is specified, the power limits node is used
+as a fallback when no other subnode matches.
+
+Subnodes txpower-2g, txpower-5g:
+
+Properties:
+- channels: pairs of first and last channel number
+- cck: 4 half-dBm per-rate power limit values
+- ofdm: 8 half-dBm per-rate power limit values
+- mcs:
+ sets of per-rate power limit values for 802.11n/802.11ac rates for
+ multiple channel bandwidth settings.
+ Each set starts with the number of channel bandwidth settings for
+ which the rate set applies, followed by either 8 (MT7603/MT7628) or
+ 10 (all other chips) power limit values.
+ The order of the channel bandwidth settings is: 20, 40, 80, 160 MHz.
+- ru:
+ sets of per-rate power limit values for 802.11ax rates for multiple
+ channel bandwidth or resource unit settings.
+ Each set starts with the number of channel bandwidth or resource unit
+ settings for which the rate set applies, followed by 12 power limit
+ values. The order of the channel resource unit settings is:
+ RU26, RU52, RU106, RU242/SU20, RU484/SU40, RU996/SU80, RU2x996/SU160.
+- txs-delta: half-dBm power delta for different numbers of antennas (1, 2, ...)
+
+
+power-limit example:
+
+power-limits {
+ r0 {
+ regdomain = "FCC";
+ txpower-5g {
+ r1 {
+ channels = <36 48>;
+ ofdm = <23 23 23 23 23 23 23 23>;
+ mcs = <1 23 23 23 23 23 23 23 23 23 23>,
+ <3 22 22 22 22 22 22 22 22 22 22>;
+ ru = <3 22 22 22 22 22 22 22 22 22 22 22 22>,
+ <4 20 20 20 20 20 20 20 20 20 20 20 20>;
+ };
+ r2 {
+ channels = <100 181>;
+ ofdm = <14 14 14 14 14 14 14 14>;
+ mcs = <4 14 14 14 14 14 14 14 14 14 14>;
+ txs-delta = <12 9 6>;
+ ru = <7 14 14 14 14 14 14 14 14 14 14 14 14>;
+ };
+ };
+ };
+};
--
2.24.0
