Hi Doug,
The send callback for the CEs do check for hw_index/SRRI before trying
to free the buffer.
But adding a check for copy-complete (before calling the individual CE
callbacks) seems to be the better approach. Hence I agree that this
patch should be added.
Thanks,
Rakesh Pillai.
On 2020-06-09 20:50, Douglas Anderson wrote:
On wcn3990 we have "per_ce_irq = true". That makes the
ath10k_ce_interrupt_summary() function always return 0xfff. The
ath10k_ce_per_engine_service_any() function will see this and think
that _all_ copy engines have an interrupt. Without checking, the
ath10k_ce_per_engine_service() assumes that if it's called that the
"copy complete" (cc) interrupt fired. This combination seems bad.
Let's add a check to make sure that the "copy complete" interrupt
actually fired in ath10k_ce_per_engine_service().
This might fix a hard-to-reproduce failure where it appears that the
copy complete handlers run before the copy is really complete.
Specifically a symptom was that we were seeing this on a Qualcomm
sc7180 board:
arm-smmu 15000000.iommu: Unhandled context fault:
fsr=0x402, iova=0x7fdd45780, fsynr=0x30003, cbfrsynra=0xc1, cb=10
Even on platforms that don't have wcn3990 this still seems like it
would be a sane thing to do. Specifically the current IRQ handler
comments indicate that there might be other misc interrupt sources
firing that need to be cleared. If one of those sources was the one
that caused the IRQ handler to be called it would also be important to
double-check that the interrupt we cared about actually fired.
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Reviewed-by: Rakesh Pillai <pillair@xxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/ce.c | 30 +++++++++++++++++++---------
1 file changed, 21 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/ce.c
b/drivers/net/wireless/ath/ath10k/ce.c
index 294fbc1e89ab..ffdd4b995f33 100644
--- a/drivers/net/wireless/ath/ath10k/ce.c
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -481,6 +481,15 @@ static inline void
ath10k_ce_engine_int_status_clear(struct ath10k *ar,
ath10k_ce_write32(ar, ce_ctrl_addr + wm_regs->addr, mask);
}
+static inline bool ath10k_ce_engine_int_status_check(struct ath10k
*ar,
+ u32 ce_ctrl_addr,
+ unsigned int mask)
+{
+ struct ath10k_hw_ce_host_wm_regs *wm_regs = ar->hw_ce_regs->wm_regs;
+
+ return ath10k_ce_read32(ar, ce_ctrl_addr + wm_regs->addr) & mask;
+}
+
/*
* Guts of ath10k_ce_send.
* The caller takes responsibility for any needed locking.
@@ -1301,19 +1310,22 @@ void ath10k_ce_per_engine_service(struct
ath10k *ar, unsigned int ce_id)
spin_lock_bh(&ce->ce_lock);
- /* Clear the copy-complete interrupts that will be handled here. */
- ath10k_ce_engine_int_status_clear(ar, ctrl_addr,
- wm_regs->cc_mask);
+ if (ath10k_ce_engine_int_status_check(ar, ctrl_addr,
+ wm_regs->cc_mask)) {
+ /* Clear before handling */
+ ath10k_ce_engine_int_status_clear(ar, ctrl_addr,
+ wm_regs->cc_mask);
- spin_unlock_bh(&ce->ce_lock);
+ spin_unlock_bh(&ce->ce_lock);
- if (ce_state->recv_cb)
- ce_state->recv_cb(ce_state);
+ if (ce_state->recv_cb)
+ ce_state->recv_cb(ce_state);
- if (ce_state->send_cb)
- ce_state->send_cb(ce_state);
+ if (ce_state->send_cb)
+ ce_state->send_cb(ce_state);
- spin_lock_bh(&ce->ce_lock);
+ spin_lock_bh(&ce->ce_lock);
+ }
/*
* Misc CE interrupts are not being handled, but still need
