Search Linux Wireless

[PATCH AUTOSEL 5.4 002/175] ath10k: Fix the race condition in firmware dump work queue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Maharaja Kennadyrajan <mkenna@xxxxxxxxxxxxxx>

[ Upstream commit 3d1c60460fb2823a19ead9e6ec8f184dd7271aa7 ]

There is a race condition, when the user writes 'hw-restart' and
'hard' in the simulate_fw_crash debugfs file without any delay.
In the above scenario, the firmware dump work queue(scheduled by
'hard') should be handled gracefully, while the target is in the
'hw-restart'.

Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00044

Co-developed-by: Govindaraj Saminathan <gsamin@xxxxxxxxxxxxxx>
Signed-off-by: Govindaraj Saminathan <gsamin@xxxxxxxxxxxxxx>
Signed-off-by: Maharaja Kennadyrajan <mkenna@xxxxxxxxxxxxxx>
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/1585213077-28439-1-git-send-email-mkenna@xxxxxxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/wireless/ath/ath10k/pci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 0a727502d14c..fd49d3419e79 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2074,6 +2074,7 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
 	ath10k_pci_irq_sync(ar);
 	napi_synchronize(&ar->napi);
 	napi_disable(&ar->napi);
+	cancel_work_sync(&ar_pci->dump_work);
 
 	/* Most likely the device has HTT Rx ring configured. The only way to
 	 * prevent the device from accessing (and possible corrupting) host
-- 
2.25.1




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux