This patch series adds 6GHz frequency listing in ath11k driver and mac80211 registration for the 6GHz band. Also, extends some of wmi command tlvs for supporting 6GHz. In cfg80211, a new channel flag is added for identifying Preferred Scanning Channels (PSC) in 6GHz band. Pradeep Kumar Chitrapu (9): cfg80211: Add new channel flag to identify 6GHz PSC channel ath11k: add 6G frequency list supported by driver ath11k: add support for 6GHz radio in driver ath11k: Use freq instead of channel number in rx path ath11k: extend peer_assoc_cmd for 6GHz band ath11k: set psc channel flag when sending channel list to firmware. ath11k: Add 6G scan dwell time parameter in scan request command ath11k: Send multiple scan_chan_list messages if required ath11k: Add support for 6g scan hint drivers/net/wireless/ath/ath11k/core.h | 6 +- drivers/net/wireless/ath/ath11k/dp_rx.c | 6 +- drivers/net/wireless/ath/ath11k/mac.c | 160 ++++++++++++-- drivers/net/wireless/ath/ath11k/reg.c | 4 + drivers/net/wireless/ath/ath11k/wmi.c | 264 +++++++++++++++++------- drivers/net/wireless/ath/ath11k/wmi.h | 40 +++- include/net/cfg80211.h | 2 + net/wireless/reg.c | 19 ++ 8 files changed, 406 insertions(+), 95 deletions(-) -- 2.17.1
