Search Linux Wireless

[PATCH 25/37] docs: networking: device drivers: convert intel/ipw2200.txt to ReST

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



- add SPDX header;
- adjust titles and chapters, adding proper markups;
- comment out text-only TOC from html/pdf output;
- use copyright symbol;
- use :field: markup;
- mark code blocks and literals as such;
- mark tables as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---
 .../networking/device_drivers/index.rst       |   1 +
 .../intel/{ipw2200.txt => ipw2200.rst}        | 410 ++++++++++--------
 MAINTAINERS                                   |   2 +-
 drivers/net/wireless/intel/ipw2x00/Kconfig    |   2 +-
 4 files changed, 235 insertions(+), 180 deletions(-)
 rename Documentation/networking/device_drivers/intel/{ipw2200.txt => ipw2200.rst} (64%)

diff --git a/Documentation/networking/device_drivers/index.rst b/Documentation/networking/device_drivers/index.rst
index 54ed10f3d1a7..f9ce0089ec7d 100644
--- a/Documentation/networking/device_drivers/index.rst
+++ b/Documentation/networking/device_drivers/index.rst
@@ -40,6 +40,7 @@ Contents:
    freescale/dpaa
    freescale/gianfar
    intel/ipw2100
+   intel/ipw2200
 
 .. only::  subproject and html
 
diff --git a/Documentation/networking/device_drivers/intel/ipw2200.txt b/Documentation/networking/device_drivers/intel/ipw2200.rst
similarity index 64%
rename from Documentation/networking/device_drivers/intel/ipw2200.txt
rename to Documentation/networking/device_drivers/intel/ipw2200.rst
index b7658bed4906..0cb42d2fd7e5 100644
--- a/Documentation/networking/device_drivers/intel/ipw2200.txt
+++ b/Documentation/networking/device_drivers/intel/ipw2200.rst
@@ -1,8 +1,15 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
 
-Intel(R) PRO/Wireless 2915ABG Driver for Linux in support of:
+==============================================
+Intel(R) PRO/Wireless 2915ABG Driver for Linux
+==============================================
 
-Intel(R) PRO/Wireless 2200BG Network Connection
-Intel(R) PRO/Wireless 2915ABG Network Connection
+
+Support for:
+
+- Intel(R) PRO/Wireless 2200BG Network Connection
+- Intel(R) PRO/Wireless 2915ABG Network Connection
 
 Note: The Intel(R) PRO/Wireless 2915ABG Driver for Linux and Intel(R)
 PRO/Wireless 2200BG Driver for Linux is a unified driver that works on
@@ -10,37 +17,37 @@ both hardware adapters listed above. In this document the Intel(R)
 PRO/Wireless 2915ABG Driver for Linux will be used to reference the
 unified driver.
 
-Copyright (C) 2004-2006, Intel Corporation
+Copyright |copy| 2004-2006, Intel Corporation
 
 README.ipw2200
 
-Version: 1.1.2
-Date   : March 30, 2006
+:Version: 1.1.2
+:Date: March 30, 2006
 
 
-Index
------------------------------------------------
-0.   IMPORTANT INFORMATION BEFORE USING THIS DRIVER
-1.   Introduction
-1.1. Overview of features
-1.2. Module parameters
-1.3. Wireless Extension Private Methods
-1.4. Sysfs Helper Files
-1.5. Supported channels
-2.   Ad-Hoc Networking
-3.   Interacting with Wireless Tools
-3.1. iwconfig mode
-3.2. iwconfig sens
-4.   About the Version Numbers
-5.   Firmware installation
-6.   Support
-7.   License
+.. Index
 
+    0.   IMPORTANT INFORMATION BEFORE USING THIS DRIVER
+    1.   Introduction
+    1.1. Overview of features
+    1.2. Module parameters
+    1.3. Wireless Extension Private Methods
+    1.4. Sysfs Helper Files
+    1.5. Supported channels
+    2.   Ad-Hoc Networking
+    3.   Interacting with Wireless Tools
+    3.1. iwconfig mode
+    3.2. iwconfig sens
+    4.   About the Version Numbers
+    5.   Firmware installation
+    6.   Support
+    7.   License
 
-0.   IMPORTANT INFORMATION BEFORE USING THIS DRIVER
------------------------------------------------
 
-Important Notice FOR ALL USERS OR DISTRIBUTORS!!!! 
+0. IMPORTANT INFORMATION BEFORE USING THIS DRIVER
+=================================================
+
+Important Notice FOR ALL USERS OR DISTRIBUTORS!!!!
 
 Intel wireless LAN adapters are engineered, manufactured, tested, and
 quality checked to ensure that they meet all necessary local and
@@ -56,7 +63,7 @@ product is granted. Intel's wireless LAN's EEPROM, firmware, and
 software driver are designed to carefully control parameters that affect
 radio operation and to ensure electromagnetic compliance (EMC). These
 parameters include, without limitation, RF power, spectrum usage,
-channel scanning, and human exposure. 
+channel scanning, and human exposure.
 
 For these reasons Intel cannot permit any manipulation by third parties
 of the software provided in binary format with the wireless WLAN
@@ -70,7 +77,7 @@ no liability, under any theory of liability for any issues associated
 with the modified products, including without limitation, claims under
 the warranty and/or issues arising from regulatory non-compliance, and
 (iii) Intel will not provide or be required to assist in providing
-support to any third parties for such modified products.  
+support to any third parties for such modified products.
 
 Note: Many regulatory agencies consider Wireless LAN adapters to be
 modules, and accordingly, condition system-level regulatory approval
@@ -78,23 +85,24 @@ upon receipt and review of test data documenting that the antennas and
 system configuration do not cause the EMC and radio operation to be
 non-compliant.
 
-The drivers available for download from SourceForge are provided as a 
-part of a development project.  Conformance to local regulatory 
-requirements is the responsibility of the individual developer.  As 
-such, if you are interested in deploying or shipping a driver as part of 
-solution intended to be used for purposes other than development, please 
+The drivers available for download from SourceForge are provided as a
+part of a development project.  Conformance to local regulatory
+requirements is the responsibility of the individual developer.  As
+such, if you are interested in deploying or shipping a driver as part of
+solution intended to be used for purposes other than development, please
 obtain a tested driver from Intel Customer Support at:
 
 http://support.intel.com
 
 
-1.   Introduction
------------------------------------------------
-The following sections attempt to provide a brief introduction to using 
+1. Introduction
+===============
+
+The following sections attempt to provide a brief introduction to using
 the Intel(R) PRO/Wireless 2915ABG Driver for Linux.
 
-This document is not meant to be a comprehensive manual on 
-understanding or using wireless technologies, but should be sufficient 
+This document is not meant to be a comprehensive manual on
+understanding or using wireless technologies, but should be sufficient
 to get you moving without wires on Linux.
 
 For information on building and installing the driver, see the INSTALL
@@ -102,14 +110,14 @@ file.
 
 
 1.1. Overview of Features
------------------------------------------------
+-------------------------
 The current release (1.1.2) supports the following features:
 
 + BSS mode (Infrastructure, Managed)
 + IBSS mode (Ad-Hoc)
 + WEP (OPEN and SHARED KEY mode)
 + 802.1x EAP via wpa_supplicant and xsupplicant
-+ Wireless Extension support 
++ Wireless Extension support
 + Full B and G rate support (2200 and 2915)
 + Full A rate support (2915 only)
 + Transmit power control
@@ -122,102 +130,107 @@ supported:
 + long/short preamble support
 + Monitor mode (aka RFMon)
 
-The distinction between officially supported and enabled is a reflection 
+The distinction between officially supported and enabled is a reflection
 on the amount of validation and interoperability testing that has been
-performed on a given feature. 
+performed on a given feature.
 
 
 
 1.2. Command Line Parameters
------------------------------------------------
+----------------------------
 
 Like many modules used in the Linux kernel, the Intel(R) PRO/Wireless
-2915ABG Driver for Linux allows configuration options to be provided 
-as module parameters.  The most common way to specify a module parameter 
-is via the command line.  
+2915ABG Driver for Linux allows configuration options to be provided
+as module parameters.  The most common way to specify a module parameter
+is via the command line.
 
-The general form is:
+The general form is::
 
-% modprobe ipw2200 parameter=value
+    % modprobe ipw2200 parameter=value
 
 Where the supported parameter are:
 
   associate
 	Set to 0 to disable the auto scan-and-associate functionality of the
-	driver.  If disabled, the driver will not attempt to scan 
-	for and associate to a network until it has been configured with 
-	one or more properties for the target network, for example configuring 
+	driver.  If disabled, the driver will not attempt to scan
+	for and associate to a network until it has been configured with
+	one or more properties for the target network, for example configuring
 	the network SSID.  Default is 0 (do not auto-associate)
-	
+
 	Example: % modprobe ipw2200 associate=0
 
   auto_create
-	Set to 0 to disable the auto creation of an Ad-Hoc network 
-	matching the channel and network name parameters provided.  
+	Set to 0 to disable the auto creation of an Ad-Hoc network
+	matching the channel and network name parameters provided.
 	Default is 1.
 
   channel
 	channel number for association.  The normal method for setting
-        the channel would be to use the standard wireless tools
-        (i.e. `iwconfig eth1 channel 10`), but it is useful sometimes
+	the channel would be to use the standard wireless tools
+	(i.e. `iwconfig eth1 channel 10`), but it is useful sometimes
 	to set this while debugging.  Channel 0 means 'ANY'
 
   debug
 	If using a debug build, this is used to control the amount of debug
 	info is logged.  See the 'dvals' and 'load' script for more info on
-	how to use this (the dvals and load scripts are provided as part 
-	of the ipw2200 development snapshot releases available from the 
+	how to use this (the dvals and load scripts are provided as part
+	of the ipw2200 development snapshot releases available from the
 	SourceForge project at http://ipw2200.sf.net)
-  
+
   led
 	Can be used to turn on experimental LED code.
 	0 = Off, 1 = On.  Default is 1.
 
   mode
-	Can be used to set the default mode of the adapter.  
+	Can be used to set the default mode of the adapter.
 	0 = Managed, 1 = Ad-Hoc, 2 = Monitor
 
 
 1.3. Wireless Extension Private Methods
------------------------------------------------
+---------------------------------------
 
-As an interface designed to handle generic hardware, there are certain 
-capabilities not exposed through the normal Wireless Tool interface.  As 
-such, a provision is provided for a driver to declare custom, or 
-private, methods.  The Intel(R) PRO/Wireless 2915ABG Driver for Linux 
+As an interface designed to handle generic hardware, there are certain
+capabilities not exposed through the normal Wireless Tool interface.  As
+such, a provision is provided for a driver to declare custom, or
+private, methods.  The Intel(R) PRO/Wireless 2915ABG Driver for Linux
 defines several of these to configure various settings.
 
-The general form of using the private wireless methods is:
+The general form of using the private wireless methods is::
 
 	% iwpriv $IFNAME method parameters
 
-Where $IFNAME is the interface name the device is registered with 
+Where $IFNAME is the interface name the device is registered with
 (typically eth1, customized via one of the various network interface
 name managers, such as ifrename)
 
 The supported private methods are:
 
   get_mode
-	Can be used to report out which IEEE mode the driver is 
+	Can be used to report out which IEEE mode the driver is
 	configured to support.  Example:
-	
+
 	% iwpriv eth1 get_mode
 	eth1	get_mode:802.11bg (6)
 
   set_mode
-	Can be used to configure which IEEE mode the driver will 
-	support.  
+	Can be used to configure which IEEE mode the driver will
+	support.
+
+	Usage::
+
+	    % iwpriv eth1 set_mode {mode}
 
-	Usage:
-	% iwpriv eth1 set_mode {mode}
 	Where {mode} is a number in the range 1-7:
+
+	==	=====================
 	1	802.11a (2915 only)
 	2	802.11b
 	3	802.11ab (2915 only)
-	4	802.11g 
+	4	802.11g
 	5	802.11ag (2915 only)
 	6	802.11bg
 	7	802.11abg (2915 only)
+	==	=====================
 
   get_preamble
 	Can be used to report configuration of preamble length.
@@ -225,99 +238,123 @@ The supported private methods are:
   set_preamble
 	Can be used to set the configuration of preamble length:
 
-	Usage:
-	% iwpriv eth1 set_preamble {mode}
+	Usage::
+
+	    % iwpriv eth1 set_preamble {mode}
+
 	Where {mode} is one of:
+
+	==	========================================
 	1	Long preamble only
 	0	Auto (long or short based on connection)
-	
+	==	========================================
 
-1.4. Sysfs Helper Files:
------------------------------------------------
 
-The Linux kernel provides a pseudo file system that can be used to 
+1.4. Sysfs Helper Files
+-----------------------
+
+The Linux kernel provides a pseudo file system that can be used to
 access various components of the operating system.  The Intel(R)
 PRO/Wireless 2915ABG Driver for Linux exposes several configuration
 parameters through this mechanism.
 
-An entry in the sysfs can support reading and/or writing.  You can 
-typically query the contents of a sysfs entry through the use of cat, 
-and can set the contents via echo.  For example:
+An entry in the sysfs can support reading and/or writing.  You can
+typically query the contents of a sysfs entry through the use of cat,
+and can set the contents via echo.  For example::
 
-% cat /sys/bus/pci/drivers/ipw2200/debug_level
+    % cat /sys/bus/pci/drivers/ipw2200/debug_level
 
-Will report the current debug level of the driver's logging subsystem 
+Will report the current debug level of the driver's logging subsystem
 (only available if CONFIG_IPW2200_DEBUG was configured when the driver
 was built).
 
-You can set the debug level via:
+You can set the debug level via::
 
-% echo $VALUE > /sys/bus/pci/drivers/ipw2200/debug_level
+    % echo $VALUE > /sys/bus/pci/drivers/ipw2200/debug_level
 
-Where $VALUE would be a number in the case of this sysfs entry.  The 
-input to sysfs files does not have to be a number.  For example, the 
-firmware loader used by hotplug utilizes sysfs entries for transferring 
+Where $VALUE would be a number in the case of this sysfs entry.  The
+input to sysfs files does not have to be a number.  For example, the
+firmware loader used by hotplug utilizes sysfs entries for transferring
 the firmware image from user space into the driver.
 
-The Intel(R) PRO/Wireless 2915ABG Driver for Linux exposes sysfs entries 
-at two levels -- driver level, which apply to all instances of the driver 
-(in the event that there are more than one device installed) and device 
+The Intel(R) PRO/Wireless 2915ABG Driver for Linux exposes sysfs entries
+at two levels -- driver level, which apply to all instances of the driver
+(in the event that there are more than one device installed) and device
 level, which applies only to the single specific instance.
 
 
 1.4.1 Driver Level Sysfs Helper Files
------------------------------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 For the driver level files, look in /sys/bus/pci/drivers/ipw2200/
 
-  debug_level  
-	
+  debug_level
 	This controls the same global as the 'debug' module parameter
 
 
 
 1.4.2 Device Level Sysfs Helper Files
------------------------------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+For the device level files, look in::
 
-For the device level files, look in
-	
 	/sys/bus/pci/drivers/ipw2200/{PCI-ID}/
 
-For example:
+For example:::
+
 	/sys/bus/pci/drivers/ipw2200/0000:02:01.0
 
 For the device level files, see /sys/bus/pci/drivers/ipw2200:
 
   rf_kill
-	read - 
-	0 = RF kill not enabled (radio on)
-	1 = SW based RF kill active (radio off)
-	2 = HW based RF kill active (radio off)
-	3 = Both HW and SW RF kill active (radio off)
+	read -
+
+	==  =========================================
+	0   RF kill not enabled (radio on)
+	1   SW based RF kill active (radio off)
+	2   HW based RF kill active (radio off)
+	3   Both HW and SW RF kill active (radio off)
+	==  =========================================
+
 	write -
-	0 = If SW based RF kill active, turn the radio back on
-	1 = If radio is on, activate SW based RF kill
 
-	NOTE: If you enable the SW based RF kill and then toggle the HW
-  	based RF kill from ON -> OFF -> ON, the radio will NOT come back on
-	
-  ucode 
+	==  ==================================================
+	0   If SW based RF kill active, turn the radio back on
+	1   If radio is on, activate SW based RF kill
+	==  ==================================================
+
+	.. note::
+
+	   If you enable the SW based RF kill and then toggle the HW
+	   based RF kill from ON -> OFF -> ON, the radio will NOT come back on
+
+  ucode
 	read-only access to the ucode version number
 
   led
 	read -
-	0 = LED code disabled
-	1 = LED code enabled
+
+	==  =================
+	0   LED code disabled
+	1   LED code enabled
+	==  =================
+
 	write -
-	0 = Disable LED code
-	1 = Enable LED code
 
-	NOTE: The LED code has been reported to hang some systems when 
-	running ifconfig and is therefore disabled by default.
+	==  ================
+	0   Disable LED code
+	1   Enable LED code
+	==  ================
+
+
+	.. note::
+
+	   The LED code has been reported to hang some systems when
+	   running ifconfig and is therefore disabled by default.
 
 
 1.5. Supported channels
------------------------------------------------
+-----------------------
 
 Upon loading the Intel(R) PRO/Wireless 2915ABG Driver for Linux, a
 message stating the detected geography code and the number of 802.11
@@ -326,44 +363,59 @@ channels supported by the card will be displayed in the log.
 The geography code corresponds to a regulatory domain as shown in the
 table below.
 
-					  Supported channels
-Code	Geography			802.11bg	802.11a
+	+------+----------------------------+--------------------+
+	|      |			    | Supported channels |
+	| Code |        Geography	    +----------+---------+
+	|      |			    | 802.11bg | 802.11a |
+	+======+============================+==========+=========+
+	| ---  | Restricted 		    |  11      |   0     |
+	+------+----------------------------+----------+---------+
+	| ZZF  | Custom US/Canada 	    |  11      |   8     |
+	+------+----------------------------+----------+---------+
+	| ZZD  | Rest of World 		    |  13      |   0     |
+	+------+----------------------------+----------+---------+
+	| ZZA  | Custom USA & Europe & High |  11      |  13     |
+	+------+----------------------------+----------+---------+
+	| ZZB  | Custom NA & Europe	    |  11      |  13     |
+	+------+----------------------------+----------+---------+
+	| ZZC  | Custom Japan 		    |  11      |   4     |
+	+------+----------------------------+----------+---------+
+	| ZZM  | Custom  		    |  11      |   0     |
+	+------+----------------------------+----------+---------+
+	| ZZE  | Europe 		    |  13      |  19     |
+	+------+----------------------------+----------+---------+
+	| ZZJ  | Custom Japan 		    |  14      |   4     |
+	+------+----------------------------+----------+---------+
+	| ZZR  | Rest of World		    |  14      |   0     |
+	+------+----------------------------+----------+---------+
+	| ZZH  | High Band		    |  13      |   4     |
+	+------+----------------------------+----------+---------+
+	| ZZG  | Custom Europe		    |  13      |   4     |
+	+------+----------------------------+----------+---------+
+	| ZZK  | Europe 		    |  13      |  24     |
+	+------+----------------------------+----------+---------+
+	| ZZL  | Europe 		    |  11      |  13     |
+	+------+----------------------------+----------+---------+
 
----	Restricted			11 	 	 0
-ZZF	Custom US/Canada		11	 	 8
-ZZD	Rest of World			13	 	 0
-ZZA	Custom USA & Europe & High	11		13
-ZZB	Custom NA & Europe    		11		13
-ZZC	Custom Japan			11	 	 4
-ZZM	Custom 				11	 	 0
-ZZE	Europe				13		19
-ZZJ	Custom Japan			14	 	 4
-ZZR	Rest of World			14	 	 0
-ZZH	High Band			13	 	 4
-ZZG	Custom Europe			13	 	 4
-ZZK	Europe 				13		24
-ZZL	Europe				11		13
+2.  Ad-Hoc Networking
+=====================
 
-
-2.   Ad-Hoc Networking
------------------------------------------------
-
-When using a device in an Ad-Hoc network, it is useful to understand the 
-sequence and requirements for the driver to be able to create, join, or 
+When using a device in an Ad-Hoc network, it is useful to understand the
+sequence and requirements for the driver to be able to create, join, or
 merge networks.
 
-The following attempts to provide enough information so that you can 
-have a consistent experience while using the driver as a member of an 
+The following attempts to provide enough information so that you can
+have a consistent experience while using the driver as a member of an
 Ad-Hoc network.
 
 2.1. Joining an Ad-Hoc Network
------------------------------------------------
+------------------------------
 
-The easiest way to get onto an Ad-Hoc network is to join one that 
+The easiest way to get onto an Ad-Hoc network is to join one that
 already exists.
 
 2.2. Creating an Ad-Hoc Network
------------------------------------------------
+-------------------------------
 
 An Ad-Hoc networks is created using the syntax of the Wireless tool.
 
@@ -371,21 +423,21 @@ For Example:
 iwconfig eth1 mode ad-hoc essid testing channel 2
 
 2.3. Merging Ad-Hoc Networks
------------------------------------------------
+----------------------------
 
 
-3.  Interaction with Wireless Tools
------------------------------------------------
+3. Interaction with Wireless Tools
+==================================
 
 3.1 iwconfig mode
------------------------------------------------
+-----------------
 
 When configuring the mode of the adapter, all run-time configured parameters
 are reset to the value used when the module was loaded.  This includes
 channels, rates, ESSID, etc.
 
 3.2 iwconfig sens
------------------------------------------------
+-----------------
 
 The 'iwconfig ethX sens XX' command will not set the signal sensitivity
 threshold, as described in iwconfig documentation, but rather the number
@@ -394,35 +446,35 @@ to another access point. At the same time, it will set the disassociation
 threshold to 3 times the given value.
 
 
-4.   About the Version Numbers
------------------------------------------------
+4.  About the Version Numbers
+=============================
 
-Due to the nature of open source development projects, there are 
-frequently changes being incorporated that have not gone through 
-a complete validation process.  These changes are incorporated into 
+Due to the nature of open source development projects, there are
+frequently changes being incorporated that have not gone through
+a complete validation process.  These changes are incorporated into
 development snapshot releases.
 
-Releases are numbered with a three level scheme: 
+Releases are numbered with a three level scheme:
 
 	major.minor.development
 
 Any version where the 'development' portion is 0 (for example
-1.0.0, 1.1.0, etc.) indicates a stable version that will be made 
+1.0.0, 1.1.0, etc.) indicates a stable version that will be made
 available for kernel inclusion.
 
 Any version where the 'development' portion is not a 0 (for
 example 1.0.1, 1.1.5, etc.) indicates a development version that is
-being made available for testing and cutting edge users.  The stability 
+being made available for testing and cutting edge users.  The stability
 and functionality of the development releases are not know.  We make
 efforts to try and keep all snapshots reasonably stable, but due to the
-frequency of their release, and the desire to get those releases 
+frequency of their release, and the desire to get those releases
 available as quickly as possible, unknown anomalies should be expected.
 
 The major version number will be incremented when significant changes
 are made to the driver.  Currently, there are no major changes planned.
 
-5.  Firmware installation
-----------------------------------------------
+5. Firmware installation
+========================
 
 The driver requires a firmware image, download it and extract the
 files under /lib/firmware (or wherever your hotplug's firmware.agent
@@ -433,40 +485,42 @@ The firmware can be downloaded from the following URL:
     http://ipw2200.sf.net/
 
 
-6.  Support
------------------------------------------------
+6. Support
+==========
 
-For direct support of the 1.0.0 version, you can contact 
+For direct support of the 1.0.0 version, you can contact
 http://supportmail.intel.com, or you can use the open source project
 support.
 
 For general information and support, go to:
-	
+
     http://ipw2200.sf.net/
 
 
-7.  License
------------------------------------------------
+7. License
+==========
 
-  Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved.
+  Copyright |copy| 2003 - 2006 Intel Corporation. All rights reserved.
 
-  This program is free software; you can redistribute it and/or modify it 
-  under the terms of the GNU General Public License version 2 as 
+  This program is free software; you can redistribute it and/or modify it
+  under the terms of the GNU General Public License version 2 as
   published by the Free Software Foundation.
-  
-  This program is distributed in the hope that it will be useful, but WITHOUT 
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for 
+
+  This program is distributed in the hope that it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
   more details.
-  
+
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc., 59 
+  this program; if not, write to the Free Software Foundation, Inc., 59
   Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-  
+
   The full GNU General Public License is included in this distribution in the
   file called LICENSE.
-  
+
   Contact Information:
+
   James P. Ketrenos <ipw2100-admin@xxxxxxxxxxxxxxx>
+
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 2ac9c94ff4f2..62c654308bc8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8763,7 +8763,7 @@ M:	Stanislav Yakovlev <stas.yakovlev@xxxxxxxxx>
 L:	linux-wireless@xxxxxxxxxxxxxxx
 S:	Maintained
 F:	Documentation/networking/device_drivers/intel/ipw2100.rst
-F:	Documentation/networking/device_drivers/intel/ipw2200.txt
+F:	Documentation/networking/device_drivers/intel/ipw2200.rst
 F:	drivers/net/wireless/intel/ipw2x00/
 
 INTEL PSTATE DRIVER
diff --git a/drivers/net/wireless/intel/ipw2x00/Kconfig b/drivers/net/wireless/intel/ipw2x00/Kconfig
index b0b3cd6296f3..f42b3cdce611 100644
--- a/drivers/net/wireless/intel/ipw2x00/Kconfig
+++ b/drivers/net/wireless/intel/ipw2x00/Kconfig
@@ -78,7 +78,7 @@ config IPW2200
 	  A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network
 	  Connection adapters.
 
-	  See <file:Documentation/networking/device_drivers/intel/ipw2200.txt>
+	  See <file:Documentation/networking/device_drivers/intel/ipw2200.rst>
 	  for information on the capabilities currently enabled in this
 	  driver and for tips for debugging issues and problems.
 
-- 
2.25.4




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux