On top of the EEPROM target power, each rate can also has a power offset.
On many devices, this power offset is used to boost the tx power of lower
rates. Take this into account when parsing rate power.
The assumption here is, that the first rate (OFDM 6M or CCK 1M) has the
highest tx power
Signed-off-by: Felix Fietkau <nbd@xxxxxxxx>
---
drivers/net/wireless/mediatek/mt76/mt7615/eeprom.h | 6 ++++++
drivers/net/wireless/mediatek/mt76/mt7615/init.c | 11 +++++++++++
2 files changed, 17 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.h b/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.h
index bd2ac1e0e01a..3dd7009e5836 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.h
@@ -32,6 +32,8 @@ enum mt7615_eeprom_field {
MT_EE_TX0_2G_TARGET_POWER = 0x058,
MT_EE_TX0_5G_G0_TARGET_POWER = 0x070,
MT_EE_TX1_5G_G0_TARGET_POWER = 0x098,
+ MT_EE_2G_RATE_POWER = 0x0be,
+ MT_EE_5G_RATE_POWER = 0x0d5,
MT_EE_EXT_PA_2G_TARGET_POWER = 0x0f2,
MT_EE_EXT_PA_5G_TARGET_POWER = 0x0f3,
MT7663_EE_TX0_2G_TARGET_POWER = 0x123,
@@ -43,6 +45,10 @@ enum mt7615_eeprom_field {
MT7663_EE_MAX = 0x400,
};
+#define MT_EE_RATE_POWER_MASK GENMASK(5, 0)
+#define MT_EE_RATE_POWER_SIGN BIT(6)
+#define MT_EE_RATE_POWER_EN BIT(7)
+
#define MT_EE_CALDATA_FLASH_TX_DPD BIT(0)
#define MT_EE_CALDATA_FLASH_RX_CAL BIT(1)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
index 9880643888ba..7e201525305b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
@@ -198,6 +198,17 @@ void mt7615_init_txpower(struct mt7615_dev *dev,
u8 *eep = (u8 *)dev->mt76.eeprom.data;
enum nl80211_band band = sband->band;
int delta = mt76_tx_power_nss_delta(n_chains);
+ u8 rate_val;
+
+ /* assume the first rate has the highest power offset */
+ if (band == NL80211_BAND_2GHZ)
+ rate_val = eep[MT_EE_2G_RATE_POWER];
+ else
+ rate_val = eep[MT_EE_5G_RATE_POWER];
+
+ if ((rate_val & ~MT_EE_RATE_POWER_MASK) ==
+ (MT_EE_RATE_POWER_EN | MT_EE_RATE_POWER_SIGN))
+ delta += rate_val & MT_EE_RATE_POWER_MASK;
target_chains = mt7615_ext_pa_enabled(dev, band) ? 1 : n_chains;
for (i = 0; i < sband->n_channels; i++) {
--
2.24.0
