From: Yan-Hsuan Chuang <yhchuang@xxxxxxxxxxx> Add BB related routines for 8723D. The BB controls the channel, RX decoding, and RX gain. So, add DIG parameters and RX descriptor parsing for the RX frames. And the false alarm statistics help the driver to choose better DIG values. The 8723D devices have more settings for CCK rates for DIG, mostly because that the 8723D is 802.11n device. The 8723D devices cannot recieve LDPC frames, do not advertise it. v1 -> v2 * make a patchset contains less patches for review Ping-Ke Shih (8): rtw88: 8723d: Add DIG parameter rtw88: 8723d: Add query_rx_desc rtw88: 8723d: Add set_channel rtw88: handle C2H_CCX_TX_RPT to know if packet TX'ed successfully rtw88: 8723d: 11N chips don't support LDPC rtw88: 8723d: Add chip_ops::false_alarm_statistics rtw88: 8723d: Set IG register for CCK rate rtw88: 8723d: add interface configurations table drivers/net/wireless/realtek/rtw88/fw.c | 6 +- drivers/net/wireless/realtek/rtw88/fw.h | 7 +- drivers/net/wireless/realtek/rtw88/mac.c | 3 + drivers/net/wireless/realtek/rtw88/main.c | 2 +- drivers/net/wireless/realtek/rtw88/main.h | 1 + drivers/net/wireless/realtek/rtw88/phy.c | 4 + drivers/net/wireless/realtek/rtw88/rtw8723d.c | 399 ++++++++++++++++++ drivers/net/wireless/realtek/rtw88/rtw8723d.h | 75 ++++ drivers/net/wireless/realtek/rtw88/rtw8822b.c | 1 + drivers/net/wireless/realtek/rtw88/rtw8822c.c | 1 + drivers/net/wireless/realtek/rtw88/tx.c | 11 +- drivers/net/wireless/realtek/rtw88/tx.h | 2 +- 12 files changed, 504 insertions(+), 8 deletions(-) -- 2.17.1
