From: Raveendran Somu <raveendran.somu@xxxxxxxxxxx> [ Upstream commit 93a5bfbc7cad8bf3dea81c9bc07761c1226a0860 ] When the control transfer gets timed out, the error status was returned without killing that urb, this leads to using the same urb. This issue causes the kernel crash as the same urb is sumbitted multiple times. The fix is to kill the urb for timeout transfer before returning error Signed-off-by: Raveendran Somu <raveendran.somu@xxxxxxxxxxx> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@xxxxxxxxxxx> Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/1585124429-97371-2-git-send-email-chi-hsien.lin@xxxxxxxxxxx Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c index 575ed19e91951..10387a7f5d565 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c @@ -328,11 +328,12 @@ static int brcmf_usb_tx_ctlpkt(struct device *dev, u8 *buf, u32 len) return err; } timeout = brcmf_usb_ioctl_resp_wait(devinfo); - clear_bit(0, &devinfo->ctl_op); if (!timeout) { brcmf_err("Txctl wait timed out\n"); + usb_kill_urb(devinfo->ctl_urb); err = -EIO; } + clear_bit(0, &devinfo->ctl_op); return err; } @@ -358,11 +359,12 @@ static int brcmf_usb_rx_ctlpkt(struct device *dev, u8 *buf, u32 len) } timeout = brcmf_usb_ioctl_resp_wait(devinfo); err = devinfo->ctl_urb_status; - clear_bit(0, &devinfo->ctl_op); if (!timeout) { brcmf_err("rxctl wait timed out\n"); + usb_kill_urb(devinfo->ctl_urb); err = -EIO; } + clear_bit(0, &devinfo->ctl_op); if (!err) return devinfo->ctl_urb_actual_length; else -- 2.20.1
