Search Linux Wireless

[PATCH 4/4] mt76: mt7615: add support for applying tx DPD calibration from EEPROM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When the EEPROM data is read from flash, it can contain tx DPD calibration
data. Add support for sending the data to the firmware.

Signed-off-by: Felix Fietkau <nbd@xxxxxxxx>
---
 .../net/wireless/mediatek/mt76/mt7615/main.c  |   4 +-
 .../net/wireless/mediatek/mt76/mt7615/mcu.c   | 120 ++++++++++++++++++
 .../net/wireless/mediatek/mt76/mt7615/mcu.h   |   1 +
 .../wireless/mediatek/mt76/mt7615/mt7615.h    |   1 +
 4 files changed, 125 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
index ef8e9336f627..b346080458bc 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
@@ -253,8 +253,10 @@ static int mt7615_set_channel(struct mt7615_phy *phy)
 	mt7615_init_dfs_state(phy);
 	mt76_set_channel(phy->mt76);
 
-	if (is_mt7615(&dev->mt76) && dev->flash_eeprom)
+	if (is_mt7615(&dev->mt76) && dev->flash_eeprom) {
 		mt7615_mcu_apply_rx_dcoc(phy);
+		mt7615_mcu_apply_tx_dpd(phy);
+	}
 
 	ret = mt7615_mcu_set_chan_info(phy, MCU_EXT_CMD_CHANNEL_SWITCH);
 	if (ret)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
index 809aa6612d2b..b236612dd033 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
@@ -2978,3 +2978,123 @@ int mt7615_mcu_apply_rx_dcoc(struct mt7615_phy *phy)
 
 	return ret;
 }
+
+static int mt7615_dpd_freq_idx(u16 freq, u8 bw)
+{
+	static const u16 freq_list[] = {
+		4920, 4940, 4960, 4980,
+		5040, 5060, 5080, 5180,
+		5200, 5220, 5240, 5260,
+		5280, 5300, 5320, 5340,
+		5360, 5380, 5400, 5420,
+		5440, 5460, 5480, 5500,
+		5520, 5540, 5560, 5580,
+		5600, 5620, 5640, 5660,
+		5680, 5700, 5720, 5745,
+		5765, 5785, 5805, 5825,
+		5845, 5865, 5885, 5905
+	};
+	int offset_2g = ARRAY_SIZE(freq_list);
+	int idx;
+
+	if (freq < 4000) {
+		if (freq < 2432)
+			return offset_2g;
+		if (freq < 2457)
+			return offset_2g + 1;
+
+		return offset_2g + 2;
+	}
+
+	if (bw != NL80211_CHAN_WIDTH_20) {
+		idx = mt7615_find_freq_idx(freq_list, ARRAY_SIZE(freq_list),
+					   freq + 10);
+		if (idx >= 0)
+			return idx;
+
+		idx = mt7615_find_freq_idx(freq_list, ARRAY_SIZE(freq_list),
+					   freq - 10);
+		if (idx >= 0)
+			return idx;
+	}
+
+	return mt7615_find_freq_idx(freq_list, ARRAY_SIZE(freq_list), freq);
+}
+
+
+int mt7615_mcu_apply_tx_dpd(struct mt7615_phy *phy)
+{
+	struct mt7615_dev *dev = phy->dev;
+	struct cfg80211_chan_def *chandef = &phy->mt76->chandef;
+	int freq2 = chandef->center_freq2;
+	int ret;
+	struct {
+		u8 direction;
+		u8 runtime_calibration;
+		u8 _rsv[2];
+
+		__le16 center_freq;
+		u8 bw;
+		u8 band;
+		u8 is_freq2;
+		u8 success;
+		u8 dbdc_en;
+
+		u8 _rsv2;
+
+		struct {
+			struct {
+				u32 dpd_g0;
+				u8 data[32];
+			} wf0, wf1;
+
+			struct {
+				u32 dpd_g0_prim;
+				u32 dpd_g0_sec;
+				u8 data_prim[32];
+				u8 data_sec[32];
+			} wf2, wf3;
+		} dpd_data;
+	} req = {
+		.direction = 1,
+
+		.center_freq = chandef->center_freq1,
+		.bw = mt7615_mcu_chan_bw(chandef),
+		.band = chandef->center_freq1 > 4000,
+		.dbdc_en = !!dev->mt76.phy2,
+	};
+	int freq_idx;
+	u8 *eep = dev->mt76.eeprom.data;
+
+	if (!(eep[MT_EE_CALDATA_FLASH] & MT_EE_CALDATA_FLASH_TX_DPD))
+		return 0;
+
+	if (chandef->width == NL80211_CHAN_WIDTH_160) {
+		freq2 = req.center_freq + 40;
+		req.center_freq -= 40;
+	}
+
+again:
+	req.runtime_calibration = 1;
+	freq_idx = mt7615_dpd_freq_idx(req.center_freq, chandef->width);
+	if (freq_idx < 0)
+		goto out;
+
+	memcpy(&req.dpd_data, eep + MT7615_EEPROM_TXDPD_OFFSET +
+			      freq_idx * MT7615_EEPROM_TXDPD_SIZE,
+	       sizeof(req.dpd_data));
+	req.runtime_calibration = 0;
+
+out:
+	ret = __mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD_TXDPD_CAL, &req,
+				  sizeof(req), true);
+
+	if ((chandef->width == NL80211_CHAN_WIDTH_80P80 ||
+	     chandef->width == NL80211_CHAN_WIDTH_160) && !req.is_freq2) {
+		req.is_freq2 = true;
+		req.center_freq = freq2;
+		goto again;
+	}
+
+	return ret;
+}
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
index 427478002e67..983625fb72ee 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
@@ -271,6 +271,7 @@ enum {
 	MCU_EXT_CMD_SET_RX_PATH = 0x4e,
 	MCU_EXT_CMD_TX_POWER_FEATURE_CTRL = 0x58,
 	MCU_EXT_CMD_RXDCOC_CAL = 0x59,
+	MCU_EXT_CMD_TXDPD_CAL = 0x60,
 	MCU_EXT_CMD_SET_RDD_TH = 0x7c,
 	MCU_EXT_CMD_SET_RDD_PATTERN = 0x7d,
 };
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
index 39c792826c48..65a2b30fc588 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
@@ -496,6 +496,7 @@ int mt7615_mcu_set_radar_th(struct mt7615_dev *dev, int index,
 			    const struct mt7615_dfs_pattern *pattern);
 int mt7615_mcu_set_sku_en(struct mt7615_phy *phy, bool enable);
 int mt7615_mcu_apply_rx_dcoc(struct mt7615_phy *phy);
+int mt7615_mcu_apply_tx_dpd(struct mt7615_phy *phy);
 int mt7615_dfs_init_radar_detector(struct mt7615_phy *phy);
 
 int mt7615_init_debugfs(struct mt7615_dev *dev);
-- 
2.24.0




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux