Search Linux Wireless

[PATCH 1/2] staging: vt6656: set all ofdm rates to default

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



mac80211 rate control decides which odfm rates to use so all of
them should be set enabled at the appropriate bit rate.

This means vnt_get_ofdm_rate is no longer required.

Signed-off-by: Malcolm Priestley <tvboxspy@xxxxxxxxx>
---
 drivers/staging/vt6656/card.c | 54 +++--------------------------------
 1 file changed, 4 insertions(+), 50 deletions(-)

diff --git a/drivers/staging/vt6656/card.c b/drivers/staging/vt6656/card.c
index dc3ab10eb630..4abbe9b30b65 100644
--- a/drivers/staging/vt6656/card.c
+++ b/drivers/staging/vt6656/card.c
@@ -100,48 +100,6 @@ static u16 vnt_get_cck_rate(struct vnt_private *priv, u16 rate_idx)
 	return RATE_1M;
 }
 
-/*
- * Description: Get OFDM mode basic rate
- *
- * Parameters:
- *  In:
- *      priv		- The adapter to be set
- *      rate_idx	- Receiving data rate
- *  Out:
- *      none
- *
- * Return Value: response Control frame rate
- *
- */
-static u16 vnt_get_ofdm_rate(struct vnt_private *priv, u16 rate_idx)
-{
-	u16 ui = rate_idx;
-
-	dev_dbg(&priv->usb->dev, "%s basic rate: %d\n",
-		__func__,  priv->basic_rates);
-
-	if (!vnt_ofdm_min_rate(priv)) {
-		dev_dbg(&priv->usb->dev, "%s (NO OFDM) %d\n",
-			__func__, rate_idx);
-		if (rate_idx > RATE_24M)
-			rate_idx = RATE_24M;
-		return rate_idx;
-	}
-
-	while (ui > RATE_11M) {
-		if (priv->basic_rates & (1 << ui)) {
-			dev_dbg(&priv->usb->dev, "%s rate: %d\n",
-				__func__, ui);
-			return ui;
-		}
-		ui--;
-	}
-
-	dev_dbg(&priv->usb->dev, "%s basic rate: 24M\n", __func__);
-
-	return RATE_24M;
-}
-
 /*
  * Description: Calculate TxRate and RsvTime fields for RSPINF in OFDM mode.
  *
@@ -289,20 +247,16 @@ void vnt_set_rspinf(struct vnt_private *priv, u8 bb_type)
 	vnt_calculate_ofdm_rate(RATE_24M, bb_type, &tx_rate[4], &rsv_time[4]);
 
 	/*RSPINF_a_36*/
-	vnt_calculate_ofdm_rate(vnt_get_ofdm_rate(priv, RATE_36M),
-				bb_type, &tx_rate[5], &rsv_time[5]);
+	vnt_calculate_ofdm_rate(RATE_36M, bb_type, &tx_rate[5], &rsv_time[5]);
 
 	/*RSPINF_a_48*/
-	vnt_calculate_ofdm_rate(vnt_get_ofdm_rate(priv, RATE_48M),
-				bb_type, &tx_rate[6], &rsv_time[6]);
+	vnt_calculate_ofdm_rate(RATE_48M, bb_type, &tx_rate[6], &rsv_time[6]);
 
 	/*RSPINF_a_54*/
-	vnt_calculate_ofdm_rate(vnt_get_ofdm_rate(priv, RATE_54M),
-				bb_type, &tx_rate[7], &rsv_time[7]);
+	vnt_calculate_ofdm_rate(RATE_54M, bb_type, &tx_rate[7], &rsv_time[7]);
 
 	/*RSPINF_a_72*/
-	vnt_calculate_ofdm_rate(vnt_get_ofdm_rate(priv, RATE_54M),
-				bb_type, &tx_rate[8], &rsv_time[8]);
+	vnt_calculate_ofdm_rate(RATE_54M, bb_type, &tx_rate[8], &rsv_time[8]);
 
 	put_unaligned(phy[0].len, (u16 *)&data[0]);
 	data[2] = phy[0].signal;
-- 
2.25.1



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux