From: Sean Wang <sean.wang@xxxxxxxxxxxx>
Remove mt76_wr(dev, MT_CSR(0x010), 0x8208) that would cause
MT_PCIE_IRQ_ENABLE to be disabled; MT_PCIE_IRQ_ENABLE should always keep
on enabled when the driver is running.
0x44064 is a not existing address
Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
---
drivers/net/wireless/mediatek/mt76/mt7615/init.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
index f4775945e3d7..be0f3a77e22f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
@@ -117,8 +117,6 @@ static void mt7615_mac_init(struct mt7615_dev *dev)
FIELD_PREP(MT_DMA_DCR0_MAX_RX_LEN, 3072) |
MT_DMA_DCR0_RX_VEC_DROP);
if (is_mt7663(&dev->mt76)) {
- mt76_wr(dev, MT_CSR(0x010), 0x8208);
- mt76_wr(dev, 0x44064, 0x2000000);
mt76_wr(dev, MT_WF_AGG(0x160), 0x5c341c02);
mt76_wr(dev, MT_WF_AGG(0x164), 0x70708040);
} else {
--
2.25.1
