From: Sean Wang <sean.wang@xxxxxxxxxxxx>
Keep Rx filters default value if the firmware supports offload and
low power features.
Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
Co-developed-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
---
.../net/wireless/mediatek/mt76/mt7615/init.c | 24 +++++++++++--------
1 file changed, 14 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
index 8b7d8118d9ab..96b37f6ebf1e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
@@ -22,7 +22,7 @@ static void mt7615_phy_init(struct mt7615_dev *dev)
static void
mt7615_init_mac_chain(struct mt7615_dev *dev, int chain)
{
- u32 val, mask, set;
+ u32 val;
if (!chain)
val = MT_CFG_CCR_MAC_D0_1X_GC_EN | MT_CFG_CCR_MAC_D0_2X_GC_EN;
@@ -62,15 +62,19 @@ mt7615_init_mac_chain(struct mt7615_dev *dev, int chain)
FIELD_PREP(MT_AGG_ARxCR_LIMIT(6), MT7615_RATE_RETRY - 1) |
FIELD_PREP(MT_AGG_ARxCR_LIMIT(7), MT7615_RATE_RETRY - 1));
- mask = MT_DMA_RCFR0_MCU_RX_MGMT |
- MT_DMA_RCFR0_MCU_RX_CTL_NON_BAR |
- MT_DMA_RCFR0_MCU_RX_CTL_BAR |
- MT_DMA_RCFR0_MCU_RX_BYPASS |
- MT_DMA_RCFR0_RX_DROPPED_UCAST |
- MT_DMA_RCFR0_RX_DROPPED_MCAST;
- set = FIELD_PREP(MT_DMA_RCFR0_RX_DROPPED_UCAST, 2) |
- FIELD_PREP(MT_DMA_RCFR0_RX_DROPPED_MCAST, 2);
- mt76_rmw(dev, MT_DMA_RCFR0(chain), mask, set);
+ if (!mt7615_firmware_offload(dev)) {
+ u32 mask, set;
+
+ mask = MT_DMA_RCFR0_MCU_RX_MGMT |
+ MT_DMA_RCFR0_MCU_RX_CTL_NON_BAR |
+ MT_DMA_RCFR0_MCU_RX_CTL_BAR |
+ MT_DMA_RCFR0_MCU_RX_BYPASS |
+ MT_DMA_RCFR0_RX_DROPPED_UCAST |
+ MT_DMA_RCFR0_RX_DROPPED_MCAST;
+ set = FIELD_PREP(MT_DMA_RCFR0_RX_DROPPED_UCAST, 2) |
+ FIELD_PREP(MT_DMA_RCFR0_RX_DROPPED_MCAST, 2);
+ mt76_rmw(dev, MT_DMA_RCFR0(chain), mask, set);
+ }
}
static void mt7615_mac_init(struct mt7615_dev *dev)
--
2.25.1
