Search Linux Wireless

[PATCH 3/9] mac80211: handle channel frequency offset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



cfg80211_chan_def and ieee80211_channel recently gained a
frequency offset component. Handle this where it makes
sense (potentially required by S1G channels).

For IBSS, TDLS, CSA, and ROC we return -EOPNOTSUPP if a
channel with frequency offset is passed, since they may or
may not work. Once someone tests and verifies these
commands work on thos types of channels, we can remove
that error.

join_ocb and join_mesh look harmless because they use a
simple ieee80211_vif_use_channel(), which is using an
already verified channel, so we let those through.

Signed-off-by: Thomas Pedersen <thomas@xxxxxxxxxxxx>

---
v2:
  simplify channel and KHz conversion helpers (Johannes)
  return -EOPNOTSUPP for operations which may not work
---
 net/mac80211/cfg.c        |  6 ++++++
 net/mac80211/chan.c       |  1 +
 net/mac80211/ibss.c       |  5 +++++
 net/mac80211/main.c       |  8 +++++---
 net/mac80211/mlme.c       | 16 +++++++++++----
 net/mac80211/offchannel.c |  4 ++++
 net/mac80211/scan.c       |  1 +
 net/mac80211/tdls.c       |  4 ++++
 net/mac80211/trace.h      | 41 +++++++++++++++++++++++++++++++--------
 9 files changed, 71 insertions(+), 15 deletions(-)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 0f72813fed53..7525b8dff290 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -3287,6 +3287,12 @@ __ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev,
 		goto out;
 	}
 
+	if (params->chandef.chan->freq_offset) {
+		/* this may work, but is untested */
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
 	chanctx = container_of(conf, struct ieee80211_chanctx, conf);
 
 	ch_switch.timestamp = 0;
diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c
index 9c94baaf693c..e6e192f53e4e 100644
--- a/net/mac80211/chan.c
+++ b/net/mac80211/chan.c
@@ -533,6 +533,7 @@ static void ieee80211_del_chanctx(struct ieee80211_local *local,
 		struct cfg80211_chan_def *chandef = &local->_oper_chandef;
 		chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
 		chandef->center_freq1 = chandef->chan->center_freq;
+		chandef->freq1_offset = chandef->chan->freq_offset;
 		chandef->center_freq2 = 0;
 
 		/* NOTE: Disabling radar is only valid here for
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index d40744903fa9..2479cd48fed0 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -1758,6 +1758,11 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata,
 	int i;
 	int ret;
 
+	if (params->chandef.chan->freq_offset) {
+		/* this may work, but is untested */
+		return -EOPNOTSUPP;
+	}
+
 	ret = cfg80211_chandef_dfs_required(local->hw.wiphy,
 					    &params->chandef,
 					    sdata->wdev.iftype);
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 8345926193de..3ee47dc2584b 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -104,13 +104,15 @@ static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local)
 		chandef.chan = local->tmp_channel;
 		chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
 		chandef.center_freq1 = chandef.chan->center_freq;
+		chandef.freq1_offset = chandef.chan->freq_offset;
 	} else
 		chandef = local->_oper_chandef;
 
 	WARN(!cfg80211_chandef_valid(&chandef),
-	     "control:%d MHz width:%d center: %d/%d MHz",
-	     chandef.chan->center_freq, chandef.width,
-	     chandef.center_freq1, chandef.center_freq2);
+	     "control:%d.%03d MHz width:%d center: %d.%03d/%d MHz",
+	     chandef.chan->center_freq, chandef.chan->freq_offset,
+	     chandef.width, chandef.center_freq1, chandef.freq1_offset,
+	     chandef.center_freq2);
 
 	if (!cfg80211_chandef_identical(&chandef, &local->_oper_chandef))
 		local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 16d75da0996a..4eebee49bb7d 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -162,6 +162,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
 	chandef->chan = channel;
 	chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
 	chandef->center_freq1 = channel->center_freq;
+	chandef->freq1_offset = channel->freq_offset;
 
 	if (!ht_oper || !sta_ht_cap.ht_supported) {
 		ret = IEEE80211_STA_DISABLE_HT |
@@ -396,9 +397,12 @@ static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
 		return 0;
 
 	sdata_info(sdata,
-		   "AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n",
-		   ifmgd->bssid, chandef.chan->center_freq, chandef.width,
-		   chandef.center_freq1, chandef.center_freq2);
+		   "AP %pM changed bandwidth, new config is %d.%03d MHz, "
+		   "width %d (%d.%03d/%d MHz)\n",
+		   ifmgd->bssid, chandef.chan->center_freq,
+		   chandef.chan->freq_offset, chandef.width,
+		   chandef.center_freq1, chandef.freq1_offset,
+		   chandef.center_freq2);
 
 	if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT |
 				      IEEE80211_STA_DISABLE_VHT |
@@ -1364,10 +1368,14 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
 	if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef,
 				     IEEE80211_CHAN_DISABLED)) {
 		sdata_info(sdata,
-			   "AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
+			   "AP %pM switches to unsupported channel "
+			   "(%d.%03d MHz, width:%d, CF1/2: %d.%03d/%d MHz), "
+			   "disconnecting\n",
 			   ifmgd->associated->bssid,
 			   csa_ie.chandef.chan->center_freq,
+			   csa_ie.chandef.chan->freq_offset,
 			   csa_ie.chandef.width, csa_ie.chandef.center_freq1,
+			   csa_ie.chandef.freq1_offset,
 			   csa_ie.chandef.center_freq2);
 		ieee80211_queue_work(&local->hw,
 				     &ifmgd->csa_connection_drop_work);
diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
index c710504ccf1a..db3b8bf75656 100644
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -557,6 +557,10 @@ static int ieee80211_start_roc_work(struct ieee80211_local *local,
 
 	lockdep_assert_held(&local->mtx);
 
+	if (channel->freq_offset)
+		/* this may work, but is untested */
+		return -EOPNOTSUPP;
+
 	if (local->use_chanctx && !local->ops->remain_on_channel)
 		return -EOPNOTSUPP;
 
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index fdac8192a519..4d14118dddca 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -896,6 +896,7 @@ static void ieee80211_scan_state_set_channel(struct ieee80211_local *local,
 
 	local->scan_chandef.chan = chan;
 	local->scan_chandef.center_freq1 = chan->center_freq;
+	local->scan_chandef.freq1_offset = chan->freq_offset;
 	local->scan_chandef.center_freq2 = 0;
 	switch (scan_req->scan_width) {
 	case NL80211_BSS_CHAN_WIDTH_5:
diff --git a/net/mac80211/tdls.c b/net/mac80211/tdls.c
index fca1f5477396..f4bc53d4a844 100644
--- a/net/mac80211/tdls.c
+++ b/net/mac80211/tdls.c
@@ -1567,6 +1567,10 @@ ieee80211_tdls_channel_switch(struct wiphy *wiphy, struct net_device *dev,
 	u32 ch_sw_tm_ie;
 	int ret;
 
+	if (chandef->chan->freq_offset)
+		/* this may work, but is untested */
+		return -EOPNOTSUPP;
+
 	mutex_lock(&local->sta_mtx);
 	sta = sta_info_get(sdata, addr);
 	if (!sta) {
diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h
index 427f51a0a994..1b4709694d2a 100644
--- a/net/mac80211/trace.h
+++ b/net/mac80211/trace.h
@@ -37,32 +37,42 @@
 #define VIF_PR_ARG	__get_str(vif_name), __entry->vif_type, __entry->p2p ? "/p2p" : ""
 
 #define CHANDEF_ENTRY	__field(u32, control_freq)					\
+			__field(u32, freq_offset)					\
 			__field(u32, chan_width)					\
 			__field(u32, center_freq1)					\
+			__field(u32, freq1_offset)					\
 			__field(u32, center_freq2)
 #define CHANDEF_ASSIGN(c)							\
 			__entry->control_freq = (c) ? ((c)->chan ? (c)->chan->center_freq : 0) : 0;	\
+			__entry->freq_offset = (c) ? ((c)->chan ? (c)->chan->freq_offset : 0) : 0;	\
 			__entry->chan_width = (c) ? (c)->width : 0;			\
 			__entry->center_freq1 = (c) ? (c)->center_freq1 : 0;		\
+			__entry->freq1_offset = (c) ? (c)->freq1_offset : 0;		\
 			__entry->center_freq2 = (c) ? (c)->center_freq2 : 0;
-#define CHANDEF_PR_FMT	" control:%d MHz width:%d center: %d/%d MHz"
-#define CHANDEF_PR_ARG	__entry->control_freq, __entry->chan_width,			\
-			__entry->center_freq1, __entry->center_freq2
+#define CHANDEF_PR_FMT	" control:%d.%03d MHz width:%d center: %d.%03d/%d MHz"
+#define CHANDEF_PR_ARG	__entry->control_freq, __entry->freq_offset, __entry->chan_width, \
+			__entry->center_freq1, __entry->freq1_offset, __entry->center_freq2
 
 #define MIN_CHANDEF_ENTRY								\
 			__field(u32, min_control_freq)					\
+			__field(u32, min_freq_offset)					\
 			__field(u32, min_chan_width)					\
 			__field(u32, min_center_freq1)					\
+			__field(u32, min_freq1_offset)					\
 			__field(u32, min_center_freq2)
 
 #define MIN_CHANDEF_ASSIGN(c)								\
 			__entry->min_control_freq = (c)->chan ? (c)->chan->center_freq : 0;	\
+			__entry->min_freq_offset = (c)->chan ? (c)->chan->freq_offset : 0;	\
 			__entry->min_chan_width = (c)->width;				\
 			__entry->min_center_freq1 = (c)->center_freq1;			\
+			__entry->freq1_offset = (c)->freq1_offset;			\
 			__entry->min_center_freq2 = (c)->center_freq2;
-#define MIN_CHANDEF_PR_FMT	" min_control:%d MHz min_width:%d min_center: %d/%d MHz"
-#define MIN_CHANDEF_PR_ARG	__entry->min_control_freq, __entry->min_chan_width,	\
-			__entry->min_center_freq1, __entry->min_center_freq2
+#define MIN_CHANDEF_PR_FMT	" min_control:%d.%03d MHz min_width:%d min_center: %d.%03d/%d MHz"
+#define MIN_CHANDEF_PR_ARG	__entry->min_control_freq, __entry->min_freq_offset,	\
+			__entry->min_chan_width,					\
+			__entry->min_center_freq1, __entry->min_freq1_offset,		\
+			__entry->min_center_freq2
 
 #define CHANCTX_ENTRY	CHANDEF_ENTRY							\
 			MIN_CHANDEF_ENTRY						\
@@ -412,6 +422,7 @@ TRACE_EVENT(drv_bss_info_changed,
 		__field(s32, cqm_rssi_hyst)
 		__field(u32, channel_width)
 		__field(u32, channel_cfreq1)
+		__field(u32, channel_cfreq1_offset)
 		__dynamic_array(u32, arp_addr_list,
 				info->arp_addr_cnt > IEEE80211_BSS_ARP_ADDR_LIST_LEN ?
 					IEEE80211_BSS_ARP_ADDR_LIST_LEN :
@@ -452,6 +463,7 @@ TRACE_EVENT(drv_bss_info_changed,
 		__entry->cqm_rssi_hyst = info->cqm_rssi_hyst;
 		__entry->channel_width = info->chandef.width;
 		__entry->channel_cfreq1 = info->chandef.center_freq1;
+		__entry->channel_cfreq1_offset = info->chandef.freq1_offset;
 		__entry->arp_addr_cnt = info->arp_addr_cnt;
 		memcpy(__get_dynamic_array(arp_addr_list), info->arp_addr_list,
 		       sizeof(u32) * (info->arp_addr_cnt > IEEE80211_BSS_ARP_ADDR_LIST_LEN ?
@@ -1223,6 +1235,7 @@ TRACE_EVENT(drv_remain_on_channel,
 		LOCAL_ENTRY
 		VIF_ENTRY
 		__field(int, center_freq)
+		__field(int, freq_offset)
 		__field(unsigned int, duration)
 		__field(u32, type)
 	),
@@ -1231,14 +1244,16 @@ TRACE_EVENT(drv_remain_on_channel,
 		LOCAL_ASSIGN;
 		VIF_ASSIGN;
 		__entry->center_freq = chan->center_freq;
+		__entry->freq_offset = chan->freq_offset;
 		__entry->duration = duration;
 		__entry->type = type;
 	),
 
 	TP_printk(
-		LOCAL_PR_FMT  VIF_PR_FMT " freq:%dMHz duration:%dms type=%d",
+		LOCAL_PR_FMT  VIF_PR_FMT " freq:%d.%03dMHz duration:%dms type=%d",
 		LOCAL_PR_ARG, VIF_PR_ARG,
-		__entry->center_freq, __entry->duration, __entry->type
+		__entry->center_freq, __entry->freq_offset,
+		__entry->duration, __entry->type
 	)
 );
 
@@ -1546,8 +1561,10 @@ struct trace_vif_entry {
 
 struct trace_chandef_entry {
 	u32 control_freq;
+	u32 freq_offset;
 	u32 chan_width;
 	u32 center_freq1;
+	u32 freq1_offset;
 	u32 center_freq2;
 } __packed;
 
@@ -1597,18 +1614,26 @@ TRACE_EVENT(drv_switch_vif_chanctx,
 					sizeof(local_vifs[i].vif.vif_name));
 				SWITCH_ENTRY_ASSIGN(old_chandef.control_freq,
 						old_ctx->def.chan->center_freq);
+				SWITCH_ENTRY_ASSIGN(old_chandef.freq_offset,
+						old_ctx->def.chan->freq_offset);
 				SWITCH_ENTRY_ASSIGN(old_chandef.chan_width,
 						    old_ctx->def.width);
 				SWITCH_ENTRY_ASSIGN(old_chandef.center_freq1,
 						    old_ctx->def.center_freq1);
+				SWITCH_ENTRY_ASSIGN(old_chandef.freq1_offset,
+						    old_ctx->def.freq1_offset);
 				SWITCH_ENTRY_ASSIGN(old_chandef.center_freq2,
 						    old_ctx->def.center_freq2);
 				SWITCH_ENTRY_ASSIGN(new_chandef.control_freq,
 						new_ctx->def.chan->center_freq);
+				SWITCH_ENTRY_ASSIGN(new_chandef.freq_offset,
+						new_ctx->def.chan->freq_offset);
 				SWITCH_ENTRY_ASSIGN(new_chandef.chan_width,
 						    new_ctx->def.width);
 				SWITCH_ENTRY_ASSIGN(new_chandef.center_freq1,
 						    new_ctx->def.center_freq1);
+				SWITCH_ENTRY_ASSIGN(new_chandef.freq1_offset,
+						    new_ctx->def.freq1_offset);
 				SWITCH_ENTRY_ASSIGN(new_chandef.center_freq2,
 						    new_ctx->def.center_freq2);
 			}
-- 
2.20.1




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux