sup_wpa feature is getting after setting feature_disable flag.
If firmware is supported sup_wpa feature, it's always enabled
regardless of feature_disable flag.
Fixes: b8a64f0e96c2 ("brcmfmac: support 4-way handshake offloading for WPA/WPA2-PSK")
Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
index 5da0dda0d899..0dcefbd0c000 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
@@ -285,13 +285,14 @@ void brcmf_feat_attach(struct brcmf_pub *drvr)
if (!err)
ifp->drvr->feat_flags |= BIT(BRCMF_FEAT_SCAN_RANDOM_MAC);
+ brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_FWSUP, "sup_wpa");
+
if (drvr->settings->feature_disable) {
brcmf_dbg(INFO, "Features: 0x%02x, disable: 0x%02x\n",
ifp->drvr->feat_flags,
drvr->settings->feature_disable);
ifp->drvr->feat_flags &= ~drvr->settings->feature_disable;
}
- brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_FWSUP, "sup_wpa");
brcmf_feat_firmware_overrides(drvr);
--
2.26.0
