<yhchuang@xxxxxxxxxxx> wrote: > From: Tzu-En Huang <tehuang@xxxxxxxxxxx> > > In previous setting, management packets' sequence numbers will > not increase and always stay at 0. Add hw sequence number support > for mgmt packets. > The table below shows different sequence number setting in the > tx descriptor. > > seq num ctrl | EN_HWSEQ | DISQSELSEL | HW_SSN_SEL > ------------------------------------------------------ > sw ctrl | 0 | N/A | N/A > hw ctrl per MACID | 1 | 0 | N/A > hw ctrl per HWREG | 1 | 1 |HWREG(0/1/2/3) > > Signed-off-by: Tzu-En Huang <tehuang@xxxxxxxxxxx> > Signed-off-by: Yan-Hsuan Chuang <yhchuang@xxxxxxxxxxx> > Reviewed-by: Brian Norris <briannorris@xxxxxxxxxxxx> > Tested-by: Brian Norris <briannorris@xxxxxxxxxxxx> Patch applied to wireless-drivers-next.git, thanks. 2542469d1258 rtw88: fix non-increase management packet sequence number -- https://patchwork.kernel.org/patch/11458951/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
