From: Yan-Hsuan Chuang <yhchuang@xxxxxxxxxxx>
After MAC switched power, the hardware's RF registers will have
its default value, but the default value for path B is incorrect.
So, load RF path B first, to decrease the period between MAC on
and RF path B config.
By test, if we load path A first, then there's ~300ms that the
path B is incorrect, it could lead to BT coex's A2DP glitch.
But if we configure path B first, there will only have ~3ms,
significantly lower possibility to have A2DP sound glitch.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@xxxxxxxxxxx>
---
drivers/net/wireless/realtek/rtw88/rtw8822c.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.c b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
index 146f693c7592..d2469f91976b 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
@@ -4128,7 +4128,7 @@ struct rtw_chip_info rtw8822c_hw_spec = {
.agc_tbl = &rtw8822c_agc_tbl,
.bb_tbl = &rtw8822c_bb_tbl,
.rfk_init_tbl = &rtw8822c_array_mp_cal_init_tbl,
- .rf_tbl = {&rtw8822c_rf_a_tbl, &rtw8822c_rf_b_tbl},
+ .rf_tbl = {&rtw8822c_rf_b_tbl, &rtw8822c_rf_a_tbl},
.rfe_defs = rtw8822c_rfe_defs,
.rfe_defs_size = ARRAY_SIZE(rtw8822c_rfe_defs),
.en_dis_dpd = true,
--
2.17.1
