Search Linux Wireless

Re: [PATCH v2 1/2] ath11k: add thermal cooling device support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx> wrote:

> Thermal cooling device support is added to control the temperature by
> throttling the data transmission for the given duration. Throttling is
> done by suspending all data tx queues by given percentage of time. The
> thermal device allows user to configure duty cycle.
> 
> Throttling can be disabled by setting the duty cycle to 0. The cooling
> device can be found under /sys/class/thermal/cooling_deviceX/.
> Corresponding soft link to this device can be found under phy folder.
> 
> /sys/class/ieee80211/phy*/device/cooling_device.
> 
> To set duty cycle as 40%,
> 
> echo 40 >/sys/class/ieee80211/phy*/device/cooling_device/cur_state
> 
> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
> Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>

2 patches applied to ath-next branch of ath.git, thanks.

2a63bbca06b2 ath11k: add thermal cooling device support
a41d10348b01 ath11k: add thermal sensor device support

-- 
https://patchwork.kernel.org/patch/11383647/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux