Search Linux Wireless

Re: [PATCH] ath10k: use kzalloc to read for ath10k_sdio_hif_diag_read

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Wen Gong <wgong@xxxxxxxxxxxxxx> wrote:

> When use command to read values, it crashed.
> 
> command:
> dd if=/sys/kernel/debug/ieee80211/phy0/ath10k/mem_value count=1 bs=4 skip=$((0x100233))
> 
> It will call to ath10k_sdio_hif_diag_read with address = 0x4008cc and buf_len = 4.
> 
> Then system crash:
> [ 1786.013258] Unable to handle kernel paging request at virtual address ffffffc00bd45000
> [ 1786.013273] Mem abort info:
> [ 1786.013281]   ESR = 0x96000045
> [ 1786.013291]   Exception class = DABT (current EL), IL = 32 bits
> [ 1786.013299]   SET = 0, FnV = 0
> [ 1786.013307]   EA = 0, S1PTW = 0
> [ 1786.013314] Data abort info:
> [ 1786.013322]   ISV = 0, ISS = 0x00000045
> [ 1786.013330]   CM = 0, WnR = 1
> [ 1786.013342] swapper pgtable: 4k pages, 39-bit VAs, pgdp = 000000008542a60e
> [ 1786.013350] [ffffffc00bd45000] pgd=0000000000000000, pud=0000000000000000
> [ 1786.013368] Internal error: Oops: 96000045 [#1] PREEMPT SMP
> [ 1786.013609] Process swapper/0 (pid: 0, stack limit = 0x0000000084b153c6)
> [ 1786.013623] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.86 #137
> [ 1786.013631] Hardware name: MediaTek krane sku176 board (DT)
> [ 1786.013643] pstate: 80000085 (Nzcv daIf -PAN -UAO)
> [ 1786.013662] pc : __memcpy+0x94/0x180
> [ 1786.013678] lr : swiotlb_tbl_unmap_single+0x84/0x150
> [ 1786.013686] sp : ffffff8008003c60
> [ 1786.013694] x29: ffffff8008003c90 x28: ffffffae96411f80
> [ 1786.013708] x27: ffffffae960d2018 x26: ffffff8019a4b9a8
> [ 1786.013721] x25: 0000000000000000 x24: 0000000000000001
> [ 1786.013734] x23: ffffffae96567000 x22: 00000000000051d4
> [ 1786.013747] x21: 0000000000000000 x20: 00000000fe6e9000
> [ 1786.013760] x19: 0000000000000004 x18: 0000000000000020
> [ 1786.013773] x17: 0000000000000001 x16: 0000000000000000
> [ 1786.013787] x15: 00000000ffffffff x14: 00000000000044c0
> [ 1786.013800] x13: 0000000000365ba4 x12: 0000000000000000
> [ 1786.013813] x11: 0000000000000001 x10: 00000037be6e9000
> [ 1786.013826] x9 : ffffffc940000000 x8 : 000000000bd45000
> [ 1786.013839] x7 : 0000000000000000 x6 : ffffffc00bd45000
> [ 1786.013852] x5 : 0000000000000000 x4 : 0000000000000000
> [ 1786.013865] x3 : 0000000000000c00 x2 : 0000000000000004
> [ 1786.013878] x1 : fffffff7be6e9004 x0 : ffffffc00bd45000
> [ 1786.013891] Call trace:
> [ 1786.013903]  __memcpy+0x94/0x180
> [ 1786.013914]  unmap_single+0x6c/0x84
> [ 1786.013925]  swiotlb_unmap_sg_attrs+0x54/0x80
> [ 1786.013938]  __swiotlb_unmap_sg_attrs+0x8c/0xa4
> [ 1786.013952]  msdc_unprepare_data+0x6c/0x84
> [ 1786.013963]  msdc_request_done+0x58/0x84
> [ 1786.013974]  msdc_data_xfer_done+0x1a0/0x1c8
> [ 1786.013985]  msdc_irq+0x12c/0x17c
> [ 1786.013996]  __handle_irq_event_percpu+0xe4/0x250
> [ 1786.014006]  handle_irq_event_percpu+0x28/0x68
> [ 1786.014015]  handle_irq_event+0x48/0x78
> [ 1786.014026]  handle_fasteoi_irq+0xd0/0x1a0
> [ 1786.014039]  __handle_domain_irq+0x84/0xc4
> [ 1786.014050]  gic_handle_irq+0x124/0x1a4
> [ 1786.014059]  el1_irq+0xb0/0x128
> [ 1786.014072]  cpuidle_enter_state+0x298/0x328
> [ 1786.014082]  cpuidle_enter+0x30/0x40
> [ 1786.014094]  do_idle+0x190/0x268
> [ 1786.014104]  cpu_startup_entry+0x24/0x28
> [ 1786.014116]  rest_init+0xd4/0xe0
> [ 1786.014126]  start_kernel+0x30c/0x38c
> [ 1786.014139] Code: f8408423 f80084c3 36100062 b8404423 (b80044c3)
> [ 1786.014150] ---[ end trace 3b02ddb698ea69ee ]---
> [ 1786.015415] Kernel panic - not syncing: Fatal exception in interrupt
> [ 1786.015433] SMP: stopping secondary CPUs
> [ 1786.015447] Kernel Offset: 0x2e8d200000 from 0xffffff8008000000
> [ 1786.015458] CPU features: 0x0,2188200c
> [ 1786.015466] Memory Limit: none
> 
> For sdio chip, it need the memory which is kmalloc, if it is
> vmalloc from ath10k_mem_value_read, then it have a memory error.
> kzalloc of ath10k_sdio_hif_diag_read32 is the correct type, so
> add kzalloc in ath10k_sdio_hif_diag_read to replace the buffer
> which is vmalloc from ath10k_mem_value_read.
> 
> This patch only effect sdio chip.
> 
> Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.
> 
> Signed-off-by: Wen Gong <wgong@xxxxxxxxxxxxxx>
> Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>

Patch applied to ath-next branch of ath.git, thanks.

402f2992b4d6 ath10k: use kzalloc to read for ath10k_sdio_hif_diag_read

-- 
https://patchwork.kernel.org/patch/11381643/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux