Search Linux Wireless

[PATCH v3 16/18] dt: bindings: net: add microchip,wilc1000,sdio.yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ajay Singh <ajay.kathat@xxxxxxxxxxxxx>

Moved '/drivers/staging/wilc1000/microchip,wilc1000,sdio.yaml' to
'Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,sdio.yaml'.

Signed-off-by: Ajay Singh <ajay.kathat@xxxxxxxxxxxxx>
---
 .../net/wireless/microchip,wilc1000,sdio.yaml | 68 +++++++++++++++++++
 1 file changed, 68 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,sdio.yaml

diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,sdio.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,sdio.yaml
new file mode 100644
index 000000000000..b338f569f7e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,sdio.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000,sdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip WILC wireless SDIO devicetree bindings
+
+maintainers:
+  - Adham Abozaeid <adham.abozaeid@xxxxxxxxxxxxx>
+  - Ajay Singh <ajay.kathat@xxxxxxxxxxxxx>
+
+description:
+  The wilc1000 chips can be connected via SDIO. The node is used to
+  specify child node to the SDIO controller that connects the device
+  to the system.
+
+properties:
+  compatible:
+    const: microchip,wilc1000-sdio
+
+  irq-gpios:
+    description: The GPIO phandle connect to a host IRQ.
+    maxItems: 1
+
+  reg:
+    description: Slot ID used in the controller.
+    maxItems: 1
+
+  clocks:
+    description: phandle to the clock connected on rtc clock line.
+    maxItems: 1
+
+  bus-width:
+    description: The number of data lines wired up the slot.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [1, 4, 8]
+      - default: 1
+
+required:
+  - compatible
+  - irq-gpios
+  - reg
+
+examples:
+  - |
+    mmc1: mmc@fc000000 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+      non-removable;
+      vmmc-supply = <&vcc_mmc1_reg>;
+      vqmmc-supply = <&vcc_3v3_reg>;
+      status = "okay";
+      wilc_sdio@0 {
+        compatible = "microchip,wilc1000-sdio";
+          irq-gpios = <&pioC 27 0>;
+          reg = <0>;
+          clocks = <&pck1>;
+          clock-names = "rtc_clk";
+          assigned-clocks = <&pck1>;
+          assigned-clock-rates = <32768>;
+          status = "okay";
+          bus-width = <4>;
+        };
+    };
-- 
2.24.0




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux