From: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>
---
include/net/cfg80211.h | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 2f8c41993ed2..6dc642bbdbd1 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -72,12 +72,12 @@ struct wiphy;
*
* @IEEE80211_CHAN_DISABLED: This channel is disabled.
* @IEEE80211_CHAN_NO_IR: do not initiate radiation, this includes
- * sending probe requests or beaconing.
+ * sending probe requests or beaconing.
* @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
* @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
- * is not permitted.
+ * is not permitted.
* @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
- * is not permitted.
+ * is not permitted.
* @IEEE80211_CHAN_NO_OFDM: OFDM is not allowed on this channel.
* @IEEE80211_CHAN_NO_80MHZ: If the driver supports 80 MHz on the band,
* this flag indicates that an 80 MHz channel cannot use this
@@ -1656,7 +1656,7 @@ struct mpath_info {
* @basic_rates_len: number of basic rates
* @ap_isolate: do not forward packets between connected stations
* @ht_opmode: HT Operation mode
- * (u16 = opmode, -1 = do not change)
+ * (u16 = opmode, -1 = do not change)
* @p2p_ctwindow: P2P CT Window (-1 = no change)
* @p2p_opp_ps: P2P opportunistic PS (-1 = no change)
*/
@@ -2032,8 +2032,8 @@ struct cfg80211_bss_select_adjust {
* @ie_len: length of ie in octets
* @flags: bit field of flags controlling operation
* @match_sets: sets of parameters to be matched for a scan result
- * entry to be considered valid and to be passed to the host
- * (others are filtered out).
+ * entry to be considered valid and to be passed to the host
+ * (others are filtered out).
* If ommited, all results are passed.
* @n_match_sets: number of match sets
* @report_results: indicates that results were reported for this request
@@ -2426,7 +2426,7 @@ struct cfg80211_disassoc_request {
* will be used in ht_capa. Un-supported values will be ignored.
* @ht_capa_mask: The bits of ht_capa which are to be used.
* @wep_keys: static WEP keys, if not NULL points to an array of
- * CFG80211_MAX_WEP_KEYS WEP keys
+ * CFG80211_MAX_WEP_KEYS WEP keys
* @wep_tx_key: key index (0..3) of the default TX static WEP key
*/
struct cfg80211_ibss_params {
@@ -4350,7 +4350,7 @@ struct cfg80211_pmsr_capabilities {
* note that if your driver uses wiphy_apply_custom_regulatory()
* the reg_notifier's request can be passed as NULL
* @regd: the driver's regulatory domain, if one was requested via
- * the regulatory_hint() API. This can be used by the driver
+ * the regulatory_hint() API. This can be used by the driver
* on the reg_notifier() if it chooses to ignore future
* regulatory domain changes caused by other drivers.
* @signal_type: signal type reported in &struct cfg80211_bss.
@@ -5420,9 +5420,9 @@ void cfg80211_send_layer2_update(struct net_device *dev, const u8 *addr);
* @wiphy: the wireless device giving the hint (used only for reporting
* conflicts)
* @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain
- * should be in. If @rd is set this should be NULL. Note that if you
- * set this to NULL you should still set rd->alpha2 to some accepted
- * alpha2.
+ * should be in. If @rd is set this should be NULL. Note that if you
+ * set this to NULL you should still set rd->alpha2 to some accepted
+ * alpha2.
*
* Wireless drivers can use this function to hint to the wireless core
* what it believes should be the current regulatory domain by
--
2.25.0
