The tid of 11a station with WMM disable reported by FW is 0x10 in tx completion. The tid 16 is mapped to a NULL txq since buffer MMPDU capbility is not supported. Then 11a station's airtime will not be registered due to NULL txq check. As a results, airtime of 11a station keeps unchanged in debugfs system. Mask the tid along with IEEE80211_QOS_CTL_TID_MASK to make it in the valid range. Hardwares tested : QCA9984 Firmwares tested : 10.4-3.10-00047 Signed-off-by: Yibo Zhao <yiboz@xxxxxxxxxxxxxx> --- drivers/net/wireless/ath/ath10k/htt_rx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index 38a5814..f883f2a 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -2744,7 +2744,8 @@ static void ath10k_htt_rx_tx_compl_ind(struct ath10k *ar, continue; } - tid = FIELD_GET(HTT_TX_PPDU_DUR_INFO0_TID_MASK, info0); + tid = FIELD_GET(HTT_TX_PPDU_DUR_INFO0_TID_MASK, info0) & + IEEE80211_QOS_CTL_TID_MASK; tx_duration = __le32_to_cpu(ppdu_dur->tx_duration); ieee80211_sta_register_airtime(peer->sta, tid, tx_duration, 0); -- 1.9.1
