From: Rakesh Pillai <pillair@xxxxxxxxxxxxxx> [ Upstream commit 6ba8b3b6bd772f575f7736c8fd893c6981fcce16 ] The management packets, send to firmware via WMI, are mapped using the direction DMA_TO_DEVICE. Currently in case of wmi cleanup, these buffers are being unmapped using an incorrect DMA direction. This can cause unwanted behavior when the host driver is handling a restart of the wlan firmware. We might see a trace like below [<ffffff8008098b18>] __dma_inv_area+0x28/0x58 [<ffffff8001176734>] ath10k_wmi_mgmt_tx_clean_up_pending+0x60/0xb0 [ath10k_core] [<ffffff80088c7c50>] idr_for_each+0x78/0xe4 [<ffffff80011766a4>] ath10k_wmi_detach+0x4c/0x7c [ath10k_core] [<ffffff8001163d7c>] ath10k_core_stop+0x58/0x68 [ath10k_core] [<ffffff800114fb74>] ath10k_halt+0xec/0x13c [ath10k_core] [<ffffff8001165110>] ath10k_core_restart+0x11c/0x1a8 [ath10k_core] [<ffffff80080c36bc>] process_one_work+0x16c/0x31c Fix the incorrect DMA direction during the wmi management tx buffer cleanup. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: dc405152bb6 ("ath10k: handle mgmt tx completion event") Signed-off-by: Rakesh Pillai <pillair@xxxxxxxxxxxxxx> Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/net/wireless/ath/ath10k/wmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 9f564e2b7a148..214d65108b294 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -9476,7 +9476,7 @@ static int ath10k_wmi_mgmt_tx_clean_up_pending(int msdu_id, void *ptr, msdu = pkt_addr->vaddr; dma_unmap_single(ar->dev, pkt_addr->paddr, - msdu->len, DMA_FROM_DEVICE); + msdu->len, DMA_TO_DEVICE); ieee80211_free_txskb(ar->hw, msdu); return 0; -- 2.20.1