From: Ajay Singh <ajay.kathat@xxxxxxxxxxxxx>
Instead of using hardcoded value for SDIO register address added the
macro for them.
Signed-off-by: Ajay Singh <ajay.kathat@xxxxxxxxxxxxx>
---
drivers/staging/wilc1000/sdio.c | 77 +++++++++++++++++----------------
drivers/staging/wilc1000/wlan.h | 36 +++++++++++++++
2 files changed, 76 insertions(+), 37 deletions(-)
diff --git a/drivers/staging/wilc1000/sdio.c b/drivers/staging/wilc1000/sdio.c
index 57c0e8415bc9..0670c5956aef 100644
--- a/drivers/staging/wilc1000/sdio.c
+++ b/drivers/staging/wilc1000/sdio.c
@@ -183,8 +183,8 @@ static int wilc_sdio_reset(struct wilc *wilc)
cmd.read_write = 1;
cmd.function = 0;
cmd.raw = 0;
- cmd.address = 0x6;
- cmd.data = 0x8;
+ cmd.address = SDIO_CCCR_ABORT;
+ cmd.data = WILC_SDIO_CCCR_ABORT_RESET;
ret = wilc_sdio_cmd52(wilc, &cmd);
if (ret) {
dev_err(&func->dev, "Fail cmd 52, reset cmd ...\n");
@@ -266,27 +266,30 @@ static int wilc_sdio_set_func0_csa_address(struct wilc *wilc, u32 adr)
cmd.read_write = 1;
cmd.function = 0;
cmd.raw = 0;
- cmd.address = 0x10c;
+ cmd.address = WILC_SDIO_FBR_CSA_REG;
cmd.data = (u8)adr;
ret = wilc_sdio_cmd52(wilc, &cmd);
if (ret) {
- dev_err(&func->dev, "Failed cmd52, set 0x10c data...\n");
+ dev_err(&func->dev, "Failed cmd52, set %04x data...\n",
+ cmd.address);
return ret;
}
- cmd.address = 0x10d;
+ cmd.address = WILC_SDIO_FBR_CSA_REG + 1;
cmd.data = (u8)(adr >> 8);
ret = wilc_sdio_cmd52(wilc, &cmd);
if (ret) {
- dev_err(&func->dev, "Failed cmd52, set 0x10d data...\n");
+ dev_err(&func->dev, "Failed cmd52, set %04x data...\n",
+ cmd.address);
return ret;
}
- cmd.address = 0x10e;
+ cmd.address = WILC_SDIO_FBR_CSA_REG + 2;
cmd.data = (u8)(adr >> 16);
ret = wilc_sdio_cmd52(wilc, &cmd);
if (ret) {
- dev_err(&func->dev, "Failed cmd52, set 0x10e data...\n");
+ dev_err(&func->dev, "Failed cmd52, set %04x data...\n",
+ cmd.address);
return ret;
}
@@ -337,7 +340,7 @@ static int wilc_sdio_write_reg(struct wilc *wilc, u32 addr, u32 data)
cpu_to_le32s(&data);
- if (addr >= 0xf0 && addr <= 0xff) {
+ if (addr >= 0xf0 && addr <= 0xff) { /* only vendor specific registers */
struct sdio_cmd52 cmd;
cmd.read_write = 1;
@@ -361,7 +364,7 @@ static int wilc_sdio_write_reg(struct wilc *wilc, u32 addr, u32 data)
cmd.read_write = 1;
cmd.function = 0;
- cmd.address = 0x10f;
+ cmd.address = WILC_SDIO_FBR_DATA_REG;
cmd.block_mode = 0;
cmd.increment = 1;
cmd.count = 4;
@@ -390,13 +393,13 @@ static int wilc_sdio_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
* func 0 access
**/
cmd.function = 0;
- cmd.address = 0x10f;
+ cmd.address = WILC_SDIO_FBR_DATA_REG;
} else {
/**
* func 1 access
**/
cmd.function = 1;
- cmd.address = 0;
+ cmd.address = WILC_SDIO_F1_DATA_REG;
}
size = ALIGN(size, 4);
@@ -455,7 +458,7 @@ static int wilc_sdio_read_reg(struct wilc *wilc, u32 addr, u32 *data)
struct wilc_sdio *sdio_priv = wilc->bus_data;
int ret;
- if (addr >= 0xf0 && addr <= 0xff) {
+ if (addr >= 0xf0 && addr <= 0xff) { /* only vendor specific registers */
struct sdio_cmd52 cmd;
cmd.read_write = 0;
@@ -478,7 +481,7 @@ static int wilc_sdio_read_reg(struct wilc *wilc, u32 addr, u32 *data)
cmd.read_write = 0;
cmd.function = 0;
- cmd.address = 0x10f;
+ cmd.address = WILC_SDIO_FBR_DATA_REG;
cmd.block_mode = 0;
cmd.increment = 1;
cmd.count = 4;
@@ -511,13 +514,13 @@ static int wilc_sdio_read(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
* func 0 access
**/
cmd.function = 0;
- cmd.address = 0x10f;
+ cmd.address = WILC_SDIO_FBR_DATA_REG;
} else {
/**
* func 1 access
**/
cmd.function = 1;
- cmd.address = 0;
+ cmd.address = WILC_SDIO_F1_DATA_REG;
}
size = ALIGN(size, 4);
@@ -598,8 +601,8 @@ static int wilc_sdio_init(struct wilc *wilc, bool resume)
cmd.read_write = 1;
cmd.function = 0;
cmd.raw = 1;
- cmd.address = 0x100;
- cmd.data = 0x80;
+ cmd.address = SDIO_FBR_BASE(func->num);
+ cmd.data = SDIO_FBR_ENABLE_CSA;
ret = wilc_sdio_cmd52(wilc, &cmd);
if (ret) {
dev_err(&func->dev, "Fail cmd 52, enable csa...\n");
@@ -622,8 +625,8 @@ static int wilc_sdio_init(struct wilc *wilc, bool resume)
cmd.read_write = 1;
cmd.function = 0;
cmd.raw = 1;
- cmd.address = 0x2;
- cmd.data = 0x2;
+ cmd.address = SDIO_CCCR_IOEx;
+ cmd.data = WILC_SDIO_CCCR_IO_EN_FUNC1;
ret = wilc_sdio_cmd52(wilc, &cmd);
if (ret) {
dev_err(&func->dev,
@@ -637,7 +640,7 @@ static int wilc_sdio_init(struct wilc *wilc, bool resume)
cmd.read_write = 0;
cmd.function = 0;
cmd.raw = 0;
- cmd.address = 0x3;
+ cmd.address = SDIO_CCCR_IORx;
loop = 3;
do {
cmd.data = 0;
@@ -647,7 +650,7 @@ static int wilc_sdio_init(struct wilc *wilc, bool resume)
"Fail cmd 52, get IOR register...\n");
return ret;
}
- if (cmd.data == 0x2)
+ if (cmd.data == WILC_SDIO_CCCR_IO_EN_FUNC1)
break;
} while (loop--);
@@ -671,8 +674,8 @@ static int wilc_sdio_init(struct wilc *wilc, bool resume)
cmd.read_write = 1;
cmd.function = 0;
cmd.raw = 1;
- cmd.address = 0x4;
- cmd.data = 0x3;
+ cmd.address = SDIO_CCCR_IENx;
+ cmd.data = WILC_SDIO_CCCR_IEN_MASTER | WILC_SDIO_CCCR_IEN_FUNC1;
ret = wilc_sdio_cmd52(wilc, &cmd);
if (ret) {
dev_err(&func->dev, "Fail cmd 52, set IEN register...\n");
@@ -711,12 +714,12 @@ static int wilc_sdio_read_size(struct wilc *wilc, u32 *size)
cmd.read_write = 0;
cmd.function = 0;
cmd.raw = 0;
- cmd.address = 0xf2;
+ cmd.address = WILC_SDIO_INTERRUPT_DATA_SZ_REG;
cmd.data = 0;
wilc_sdio_cmd52(wilc, &cmd);
tmp = cmd.data;
- cmd.address = 0xf3;
+ cmd.address = WILC_SDIO_INTERRUPT_DATA_SZ_REG + 1;
cmd.data = 0;
wilc_sdio_cmd52(wilc, &cmd);
tmp |= (cmd.data << 8);
@@ -740,10 +743,10 @@ static int wilc_sdio_read_int(struct wilc *wilc, u32 *int_status)
**/
if (!sdio_priv->irq_gpio) {
cmd.function = 1;
- cmd.address = 0x04;
+ cmd.address = WILC_SDIO_EXT_IRQ_FLAG_REG;
} else {
cmd.function = 0;
- cmd.address = 0xf7;
+ cmd.address = WILC_SDIO_IRQ_FLAG_REG;
}
cmd.raw = 0;
cmd.read_write = 0;
@@ -789,14 +792,14 @@ static int wilc_sdio_clear_int_ext(struct wilc *wilc, u32 val)
cmd.read_write = 1;
cmd.function = 0;
cmd.raw = 0;
- cmd.address = 0xf8;
+ cmd.address = WILC_SDIO_IRQ_CLEAR_FLAG_REG;
cmd.data = reg;
ret = wilc_sdio_cmd52(wilc, &cmd);
if (ret) {
dev_err(&func->dev,
- "Failed cmd52, set 0xf8 data (%d) ...\n",
- __LINE__);
+ "Failed cmd52, set (%02x) data (%d) ...\n",
+ cmd.address, __LINE__);
return ret;
}
}
@@ -819,14 +822,14 @@ static int wilc_sdio_clear_int_ext(struct wilc *wilc, u32 val)
cmd.read_write = 1;
cmd.function = 0;
cmd.raw = 0;
- cmd.address = 0xf8;
+ cmd.address = WILC_SDIO_IRQ_CLEAR_FLAG_REG;
cmd.data = BIT(i);
ret = wilc_sdio_cmd52(wilc, &cmd);
if (ret) {
dev_err(&func->dev,
- "Failed cmd52, set 0xf8 data (%d) ...\n",
- __LINE__);
+ "Failed cmd52, set (%02x) data (%d) ...\n",
+ cmd.address, __LINE__);
return ret;
}
flags &= ~BIT(i);
@@ -860,13 +863,13 @@ static int wilc_sdio_clear_int_ext(struct wilc *wilc, u32 val)
cmd.read_write = 1;
cmd.function = 0;
cmd.raw = 0;
- cmd.address = 0xf6;
+ cmd.address = WILC_SDIO_VMM_TBL_CTRL_REG;
cmd.data = vmm_ctl;
ret = wilc_sdio_cmd52(wilc, &cmd);
if (ret) {
dev_err(&func->dev,
- "Failed cmd52, set 0xf6 data (%d) ...\n",
- __LINE__);
+ "Failed cmd52, set (%02x) data (%d) ...\n",
+ cmd.address, __LINE__);
return ret;
}
}
diff --git a/drivers/staging/wilc1000/wlan.h b/drivers/staging/wilc1000/wlan.h
index 27f08b375345..ceec4801f18f 100644
--- a/drivers/staging/wilc1000/wlan.h
+++ b/drivers/staging/wilc1000/wlan.h
@@ -93,6 +93,42 @@
#define WILC_SPI_PROTOCOL_OFFSET (WILC_SPI_PROTOCOL_CONFIG - \
WILC_SPI_REG_BASE)
+/* Functions IO enables bits */
+#define WILC_SDIO_CCCR_IO_EN_FUNC1 BIT(1)
+
+/* Function/Interrupt enables bits */
+#define WILC_SDIO_CCCR_IEN_MASTER BIT(0)
+#define WILC_SDIO_CCCR_IEN_FUNC1 BIT(1)
+
+/* Abort CCCR register bits */
+#define WILC_SDIO_CCCR_ABORT_RESET BIT(3)
+
+/* Vendor specific CCCR registers */
+#define WILC_SDIO_WAKEUP_REG 0xf0
+#define WILC_SDIO_WAKEUP_BIT BIT(0)
+
+#define WILC_SDIO_CLK_STATUS_REG 0xf1
+#define WILC_SDIO_CLK_STATUS_BIT BIT(0)
+
+#define WILC_SDIO_INTERRUPT_DATA_SZ_REG 0xf2 /* Read size (2 bytes) */
+
+#define WILC_SDIO_VMM_TBL_CTRL_REG 0xf6
+#define WILC_SDIO_IRQ_FLAG_REG 0xf7
+#define WILC_SDIO_IRQ_CLEAR_FLAG_REG 0xf8
+
+#define WILC_SDIO_HOST_TO_FW_REG 0xfa
+#define WILC_SDIO_HOST_TO_FW_BIT BIT(0)
+
+#define WILC_SDIO_FW_TO_HOST_REG 0xfc
+#define WILC_SDIO_FW_TO_HOST_BIT BIT(0)
+
+/* Function 1 specific FBR register */
+#define WILC_SDIO_FBR_CSA_REG 0x10C /* CSA pointer (3 bytes) */
+#define WILC_SDIO_FBR_DATA_REG 0x10F
+
+#define WILC_SDIO_F1_DATA_REG 0x0
+#define WILC_SDIO_EXT_IRQ_FLAG_REG 0x4
+
#define WILC_AHB_DATA_MEM_BASE 0x30000
#define WILC_AHB_SHARE_MEM_BASE 0xd0000
--
2.24.0
