Search Linux Wireless

[PATCH v2] ath10k: fix unsupported chip reset debugs file write

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Before this change, after writing "warm_hw_reset" debugfs file, host
will send chip reset command to FW even though FW do not support this
service getting a warning print.

Though there is no FW impact before this change, this patch restricts
chip reset command sent to FW only if FW advertises the support via WMI
service bit.

Removed the redundant check and ath10k_warn() print as well.

New version FW will report chip reset service bit to host. Host allow user
to trigger WLAN chip reset only when fw report this service bit.

For older NON-TLV FW, since it do not report chip reset service bit, host
will not send chip reset command. For older TLV FW, since it report chip
reset service bit, host will send chip reset command.

Tested HW:  QCA9984, WCN3990

QCA9984 FW version: WLAN.BL.3.9.0.2-00042-S-1

Signed-off-by: Yingying Tang <yintang@xxxxxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath10k/debug.c | 9 ++++-----
 drivers/net/wireless/ath/ath10k/wmi.h   | 7 +++++++
 2 files changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 3894b77..f811e69 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -2373,9 +2373,6 @@ static ssize_t ath10k_write_warm_hw_reset(struct file *file,
 		goto exit;
 	}
 
-	if (!(test_bit(WMI_SERVICE_RESET_CHIP, ar->wmi.svc_map)))
-		ath10k_warn(ar, "wmi service for reset chip is not available\n");
-
 	ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->pdev_reset,
 					WMI_RST_MODE_WARM_RESET);
 
@@ -2650,8 +2647,10 @@ int ath10k_debug_register(struct ath10k *ar)
 				    ar->debug.debugfs_phy, ar,
 				    &fops_tpc_stats_final);
 
-	debugfs_create_file("warm_hw_reset", 0600, ar->debug.debugfs_phy, ar,
-			    &fops_warm_hw_reset);
+	if (test_bit(WMI_SERVICE_RESET_CHIP, ar->wmi.svc_map))
+		debugfs_create_file("warm_hw_reset", 0600,
+				    ar->debug.debugfs_phy, ar,
+				    &fops_warm_hw_reset);
 
 	debugfs_create_file("ps_state_enable", 0600, ar->debug.debugfs_phy, ar,
 			    &fops_ps_state_enable);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 972d53d..6df4157 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -371,6 +371,11 @@ enum wmi_10_4_service {
 	WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
 	WMI_10_4_SERVICE_REPORT_AIRTIME,
 	WMI_10_4_SERVICE_TX_PWR_PER_PEER,
+	WMI_10_4_SERVICE_FETCH_PEER_TX_PN,
+	WMI_10_4_SERVICE_MULTIPLE_VDEV_RESTART,
+	WMI_10_4_SERVICE_ENHANCED_RADIO_COUNTERS,
+	WMI_10_4_SERVICE_QINQ_SUPPORT,
+	WMI_10_4_SERVICE_RESET_CHIP,
 };
 
 static inline char *wmi_service_name(enum wmi_service service_id)
@@ -827,6 +832,8 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
 	       WMI_SERVICE_REPORT_AIRTIME, len);
 	SVCMAP(WMI_10_4_SERVICE_TX_PWR_PER_PEER,
 	       WMI_SERVICE_TX_PWR_PER_PEER, len);
+	SVCMAP(WMI_10_4_SERVICE_RESET_CHIP,
+	       WMI_SERVICE_RESET_CHIP, len);
 }
 
 #undef SVCMAP
-- 
1.9.1



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux