Search Linux Wireless

Re: [RESEND] ath10k: add tx hw 802.11 encapusaltion offloading support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tom Psyborg <pozega.tomislav@xxxxxxxxx> writes:

> On 17/12/2019, Kalle Valo <kvalo@xxxxxxxxxxxxxx> wrote:
>> John Crispin <john@xxxxxxxxxxx> wrote:
>>
>>> This patch adds support for ethernet rxtx mode to the driver. The feature
>>> is enabled via a new module parameter. If enabled to driver will enable
>>> the feature on a per vif basis if all other requirements were met.
>>>
>>> Testing on a IPQ4019 based hardware shows a increase in TCP throughput
>>> of ~20% when the feature is enabled.
>>>
>>> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@xxxxxxxxxxxxxxxx>
>>> Signed-off-by: John Crispin <john@xxxxxxxxxxx>
>>
>> Depends on:
>>
>> 50ff477a8639 mac80211: add 802.11 encapsulation offloading support
>>
>> Currently in mac80211-next.
>>
>> Patch set to Awaiting Upstream.
>>
>> --
>> https://patchwork.kernel.org/patch/11293627/
>>
>> https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
>>
>
> the changeset is missing support for 64bit targets in htt_tx.c

A very good point. Doesn't this break with WCN3990 then?

-- 
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux