Do not set the tx/rx start bits in MT_MAC_SYS_CTRL from within initvals.
The driver sets these later when the hardware is ready
Signed-off-by: Felix Fietkau <nbd@xxxxxxxx>
---
drivers/net/wireless/mediatek/mt76/mt76x2/init.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/init.c b/drivers/net/wireless/mediatek/mt76/mt76x2/init.c
index 79e583eb066b..a92a479aebaa 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/init.c
@@ -82,7 +82,7 @@ void mt76_write_mac_initvals(struct mt76x02_dev *dev)
{ MT_PBF_SYS_CTRL, 0x00080c00 },
{ MT_PBF_CFG, 0x1efebcff },
{ MT_FCE_PSE_CTRL, 0x00000001 },
- { MT_MAC_SYS_CTRL, 0x0000000c },
+ { MT_MAC_SYS_CTRL, 0x00000000 },
{ MT_MAX_LEN_CFG, 0x003e3f00 },
{ MT_AMPDU_MAX_LEN_20M1S, 0xaaa99887 },
{ MT_AMPDU_MAX_LEN_20M2S, 0x000000aa },
--
2.24.0
