Wen Gong <wgong@xxxxxxxxxxxxxx> wrote: > When simulate random transfer fail for sdio write and read, it crash > sometimes. > > Test steps: > 1. Add config and update kernel: > CONFIG_FAIL_MMC_REQUEST=y > CONFIG_FAULT_INJECTION=y > CONFIG_FAULT_INJECTION_DEBUG_FS=y > > 2. run simulate fail: > cd /sys/kernel/debug/mmc1/fail_mmc_request > echo 10 > probability > echo 10 > times # repeat until hitting issues > > 3. it crash, the act len of ath10k_htc_hdr is higher than allocate len, it cause panic: > [ 99.723482] skbuff: skb_over_panic: text:00000000caa0f780 len:57013 put:57013 head:000000004116f24a data:0000000019ecb4dc tail:0xdef5 end:0x640 dev:<NULL> > [ 99.737697] ------------[ cut here ]------------ > [ 99.742327] kernel BUG at /mnt/host/source/src/third_party/kernel/v4.19/net/core/skbuff.c:104! > [ 99.750937] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP > [ 99.831154] Process kworker/0:2 (pid: 151, stack limit = 0x00000000728010bf) > [ 99.838200] CPU: 0 PID: 151 Comm: kworker/0:2 Tainted: G W 4.19.85 #48 > [ 99.846022] Hardware name: MediaTek krane sku0 board (DT) > [ 99.851429] Workqueue: events sdio_irq_work > [ 99.855614] pstate: 60000005 (nZCv daif -PAN -UAO) > [ 99.860402] pc : skb_panic+0x64/0x68 > [ 99.863974] lr : skb_panic+0x64/0x68 > [ 99.867542] sp : ffffff8008833a90 > [ 99.870850] x29: ffffff8008833ac0 x28: ffffffe52e337370 > [ 99.876159] x27: ffffffe52e328a90 x26: 000000000000e0d0 > [ 99.881469] x25: ffffffe52e336b60 x24: 000000000000deb5 > [ 99.886779] x23: ffffffe52e340680 x22: ffffffe4efd47e00 > [ 99.892088] x21: 000000000000deb5 x20: ffffffa516d85b4c > [ 99.897397] x19: ffffffa526928037 x18: 0000000000000000 > [ 99.902706] x17: 000000000000003c x16: ffffffa5265b6c80 > [ 99.908015] x15: 0000000000000006 x14: 3a76656420303436 > [ 99.913325] x13: 0000000000029bf0 x12: 0000000000000000 > [ 99.918634] x11: 0000000000000000 x10: 0000000000000000 > [ 99.923943] x9 : a3b907e4b2783000 x8 : a3b907e4b2783000 > [ 99.929253] x7 : 0000000000000000 x6 : ffffffa526f66d76 > [ 99.934563] x5 : 0000000000000000 x4 : 0000000000000000 > [ 99.939872] x3 : 000000000002a5ab x2 : ffffffe53feed918 > [ 99.945182] x1 : ffffffe53fee4a08 x0 : 000000000000008e > [ 99.950491] Call trace: > [ 99.952937] skb_panic+0x64/0x68 > [ 99.956165] skb_put+0x7c/0x84 > [ 99.959224] ath10k_sdio_irq_handler+0x740/0xbb8 [ath10k_sdio] > [ 99.965055] process_sdio_pending_irqs+0x58/0x1a4 > [ 99.969758] sdio_run_irqs+0x34/0x60 > [ 99.973329] sdio_irq_work+0x1c/0x28 > [ 99.974930] cros-ec-spi spi2.0: SPI transfer timed out > [ 99.976904] process_one_work+0x210/0x410 > [ 99.976911] worker_thread+0x234/0x3dc > [ 99.976923] kthread+0x120/0x130 > [ 99.982090] cros-ec-spi spi2.0: spi transfer failed: -110 > [ 99.986054] ret_from_fork+0x10/0x18 > [ 99.986063] Code: aa1403e2 2a1503e4 a90023e9 97e37d1a (d4210000) > [ 99.986068] ---[ end trace cb6d948c5a0fd6c7 ]--- > [ 100.017250] Kernel panic - not syncing: Fatal exception > [ 100.018879] cros-ec-spi spi2.0: Command xfer error (err:-110) > [ 100.023659] SMP: stopping secondary CPUs > [ 100.023703] Kernel Offset: 0x251dc00000 from 0xffffff8008000000 > [ 100.023707] CPU features: 0x0,2188200c > [ 100.023709] Memory Limit: none > > The simulate fail of sdio is not a real sdio transter fail, it only > set an error status in mmc_should_fail_request after the transfer end, > actually the transfer is success, then sdio_io_rw_ext_helper will > return error status and stop transfer the left data. For example, > the really RX len is 286 bytes, then it will split to 2 blocks in > sdio_io_rw_ext_helper, one is 256 bytes, left is 30 bytes, if the > first 256 bytes get an error status by mmc_should_fail_request,then > the left 30 bytes will not read in this RX operation. Then when the > next RX arrive, the left 30 bytes will be considered as the header > of the read, the top 8 bytes will be considered as ath10k_htc_hdr, > but actually the 8 bytes is not the ath10k_htc_hdr, so the act_len > from this ath10k_htc_hdr is not correct, if it is a big value, such > as 57013, it will trigger skb_panic. > > Drop the skb with invalid length will be reasonable. > > This patch only effect sdio chips. > > Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029. > > Signed-off-by: Wen Gong <wgong@xxxxxxxxxxxxxx> > Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx> Patch applied to ath-next branch of ath.git, thanks. 218f646d235a ath10k: drop RX skb with invalid length for sdio -- https://patchwork.kernel.org/patch/11313849/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
