Hi, I have been running mwifiex_sdio for a uBlox 4G LTE SARA-R4 and Lily WiFi module, it seems that WiFi connection is stable, but the LTE connection is often connected and disconnected. Looking into the kernel messages, there were many messages to disconnect and connect it again every half of an hour. The device did not set IPv6 which is understandably that IPv6: ADDRCONF(NETDEV_UP) link is not ready, but why it often doing mwifiex_sdio mmc0:0001:1: info: successfully disconnected from 34:08:03 and what that means? root@solar:/var/backups# [ 2045.955013] mwifiex_sdio mmc0:0001:1: CMD_RESP: cmd 0x23f error, result=0x2 root@solar:/var/backups# [ 2250.000008] mwifiex_sdio mmc0:0001:1: info: successfully disconnected from 34:08:03 [ 2250.081497] IPv6: ADDRCONF(NETDEV_UP): mlan0: link is not ready [ 2250.206977] IPv6: ADDRCONF(NETDEV_UP): wwan0: link is not ready [ 2251.417295] mwifiex_sdio mmc0:0001:1: info: trying to associate to 'JupiterIoT' bssid 34:08:04:12:b1:a2 [ 2251.521866] mwifiex_sdio mmc0:0001:1: info: associated to bssid 34:08:04:12:b1:a2 successfully [ 2251.666834] IPv6: ADDRCONF(NETDEV_CHANGE): mlan0: link becomes ready [ 2251.743352] mwifiex_sdio mmc0:0001:1: CMD_RESP: cmd 0x23f error, result=0x2 Also, the 4G LTE SARA-R4 uses USB interface and protocol, but it seems to me that mwifiex_sdio managers both LTE and WiFi connections, right? I am currently debugging the LTE connection stability issues, it ofoten connected to LTE, then in half hours or hours randomly, lose the LTE connection. I try to narrow down the cause, whether the USB interface or from mwifiex_sdio caused LTE connection stability. When the LTE lost connection there were following errors which I am not clear if related to the mwifiex_sdio or not. Appreciate your advise and comments to diagnostic the issue and to fix the LTE connection problems. 1019.130834] option 1-1:1.0: device disconnected [ 1019.142012] qmi_wwan 1-1:1.3: nonzero urb status received: -71 [ 1019.147909] qmi_wwan 1-1:1.3: wdm_int_callback - 0 bytes [ 1019.153254] qmi_wwan 1-1:1.3: wdm_int_callback - usb_submit_urb failed with result -19 [ 1019.228197] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 Thank you. Kind regards, - jh
