Add the required USB ID for running SMCWUSBT-G2 wireless adapter (SMC
"EZ Connect g").
This device uses ar5523 chipset and requires firmware to be loaded. Even
though pid of the device is 4507, this patch adds it as 4506 so that
AR5523_DEVICE_UG macro can set the AR5523_FLAG_PRE_FIRMWARE flag for pid
4507.
Signed-off-by: Mert Dirik <mertdirik@xxxxxxxxx>
---
drivers/net/wireless/ath/ar5523/ar5523.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
index da2d179430ca..4c57e79e5779 100644
--- a/drivers/net/wireless/ath/ar5523/ar5523.c
+++ b/drivers/net/wireless/ath/ar5523/ar5523.c
@@ -1770,6 +1770,8 @@ static const struct usb_device_id ar5523_id_table[] = {
AR5523_DEVICE_UX(0x0846, 0x4300), /* Netgear / WG111U */
AR5523_DEVICE_UG(0x0846, 0x4250), /* Netgear / WG111T */
AR5523_DEVICE_UG(0x0846, 0x5f00), /* Netgear / WPN111 */
+ AR5523_DEVICE_UG(0x083a, 0x4506), /* SMC / EZ Connect
+ SMCWUSBT-G2 */
AR5523_DEVICE_UG(0x157e, 0x3006), /* Umedia / AR5523_1 */
AR5523_DEVICE_UX(0x157e, 0x3205), /* Umedia / AR5523_2 */
AR5523_DEVICE_UG(0x157e, 0x3006), /* Umedia / TEW444UBEU */
--
2.20.1
