Search Linux Wireless

[PATCH net-next v2 3/3] epic100: allow nesting of ethtool_ops begin() and complete()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Unlike most networking drivers using begin() and complete() ethtool_ops
callbacks to resume a device which is down and suspend it again when done,
epic100 does not use standard refcounted infrastructure but sets device
sleep state directly.

With the introduction of netlink ethtool interface, we may have nested
begin-complete blocks so that inner complete() would put the device back to
sleep for the rest of the outer block.

To avoid rewriting an old and not very actively developed driver, just add
a nesting counter and only perform resume and suspend on the outermost
level.

Signed-off-by: Michal Kubecek <mkubecek@xxxxxxx>
---
v2: fix inverted condition in ethtool_begin() (thanks to Andrew Lunn)
---
 drivers/net/ethernet/smsc/epic100.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/smsc/epic100.c b/drivers/net/ethernet/smsc/epic100.c
index 912760e8514c..61ddee0c2a2e 100644
--- a/drivers/net/ethernet/smsc/epic100.c
+++ b/drivers/net/ethernet/smsc/epic100.c
@@ -280,6 +280,7 @@ struct epic_private {
 	signed char phys[4];				/* MII device addresses. */
 	u16 advertising;					/* NWay media advertisement */
 	int mii_phy_cnt;
+	u32 ethtool_ops_nesting;
 	struct mii_if_info mii;
 	unsigned int tx_full:1;				/* The Tx queue is full. */
 	unsigned int default_port:4;		/* Last dev->if_port value. */
@@ -1435,8 +1436,10 @@ static int ethtool_begin(struct net_device *dev)
 	struct epic_private *ep = netdev_priv(dev);
 	void __iomem *ioaddr = ep->ioaddr;
 
+	if (ep->ethtool_ops_nesting == U32_MAX)
+		return -EBUSY;
 	/* power-up, if interface is down */
-	if (!netif_running(dev)) {
+	if (!ep->ethtool_ops_nesting++ && !netif_running(dev)) {
 		ew32(GENCTL, 0x0200);
 		ew32(NVCTL, (er32(NVCTL) & ~0x003c) | 0x4800);
 	}
@@ -1449,7 +1452,7 @@ static void ethtool_complete(struct net_device *dev)
 	void __iomem *ioaddr = ep->ioaddr;
 
 	/* power-down, if interface is down */
-	if (!netif_running(dev)) {
+	if (!--ep->ethtool_ops_nesting && !netif_running(dev)) {
 		ew32(GENCTL, 0x0008);
 		ew32(NVCTL, (er32(NVCTL) & ~0x483c) | 0x0000);
 	}
-- 
2.24.1




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux