From: Chien-Hsun Liao <ben.liao@xxxxxxxxxxx>
According to some experiments, the original rf protection
setting can not perfectly make sure that there is no hardware
pi write during the direct write. So, modify the setting so
that the hardware block of pi would be turned off during the
direct write.
Signed-off-by: Chien-Hsun Liao <ben.liao@xxxxxxxxxxx>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@xxxxxxxxxxx>
---
drivers/net/wireless/realtek/rtw88/phy.c | 10 ----------
drivers/net/wireless/realtek/rtw88/rtw8822c.c | 15 +++++++++++++++
drivers/net/wireless/realtek/rtw88/rtw8822c.h | 5 +++++
3 files changed, 20 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw88/phy.c b/drivers/net/wireless/realtek/rtw88/phy.c
index a3e1e9578b65..4b2f11be60cf 100644
--- a/drivers/net/wireless/realtek/rtw88/phy.c
+++ b/drivers/net/wireless/realtek/rtw88/phy.c
@@ -749,20 +749,10 @@ bool rtw_phy_write_rf_reg(struct rtw_dev *rtwdev, enum rtw_rf_path rf_path,
direct_addr = base_addr[rf_path] + (addr << 2);
mask &= RFREG_MASK;
- if (addr == RF_CFGCH) {
- rtw_write32_mask(rtwdev, REG_RSV_CTRL, BITS_RFC_DIRECT, DISABLE_PI);
- rtw_write32_mask(rtwdev, REG_WLRF1, BITS_RFC_DIRECT, DISABLE_PI);
- }
-
rtw_write32_mask(rtwdev, direct_addr, mask, data);
udelay(1);
- if (addr == RF_CFGCH) {
- rtw_write32_mask(rtwdev, REG_RSV_CTRL, BITS_RFC_DIRECT, ENABLE_PI);
- rtw_write32_mask(rtwdev, REG_WLRF1, BITS_RFC_DIRECT, ENABLE_PI);
- }
-
return true;
}
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.c b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
index 7c8db951a5bc..4231f94d515e 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
@@ -1289,6 +1289,17 @@ static int rtw8822c_mac_init(struct rtw_dev *rtwdev)
return 0;
}
+static void rtw8822c_rstb_3wire(struct rtw_dev *rtwdev, bool enable)
+{
+ if (enable) {
+ rtw_write32_mask(rtwdev, REG_RSTB, BIT_RSTB_3WIRE, 0x1);
+ rtw_write32_mask(rtwdev, REG_ANAPAR_A, BIT_ANAPAR_UPDATE, 0x1);
+ rtw_write32_mask(rtwdev, REG_ANAPAR_B, BIT_ANAPAR_UPDATE, 0x1);
+ } else {
+ rtw_write32_mask(rtwdev, REG_RSTB, BIT_RSTB_3WIRE, 0x0);
+ }
+}
+
static void rtw8822c_set_channel_rf(struct rtw_dev *rtwdev, u8 channel, u8 bw)
{
#define RF18_BAND_MASK (BIT(16) | BIT(9) | BIT(8))
@@ -1337,6 +1348,8 @@ static void rtw8822c_set_channel_rf(struct rtw_dev *rtwdev, u8 channel, u8 bw)
break;
}
+ rtw8822c_rstb_3wire(rtwdev, false);
+
rtw_write_rf(rtwdev, RF_PATH_A, RF_LUTWE2, 0x04, 0x01);
rtw_write_rf(rtwdev, RF_PATH_A, RF_LUTWA, 0x1f, 0x12);
rtw_write_rf(rtwdev, RF_PATH_A, RF_LUTWD0, 0xfffff, rf_rxbb);
@@ -1349,6 +1362,8 @@ static void rtw8822c_set_channel_rf(struct rtw_dev *rtwdev, u8 channel, u8 bw)
rtw_write_rf(rtwdev, RF_PATH_A, RF_CFGCH, RFREG_MASK, rf_reg18);
rtw_write_rf(rtwdev, RF_PATH_B, RF_CFGCH, RFREG_MASK, rf_reg18);
+
+ rtw8822c_rstb_3wire(rtwdev, true);
}
static void rtw8822c_toggle_igi(struct rtw_dev *rtwdev)
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.h b/drivers/net/wireless/realtek/rtw88/rtw8822c.h
index abd9f300bedd..dfd8662a0c0e 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.h
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.h
@@ -190,6 +190,8 @@ const struct rtw_table name ## _tbl = { \
#define BIT_3WIRE_TX_EN BIT(0)
#define BIT_3WIRE_RX_EN BIT(1)
#define BIT_3WIRE_PI_ON BIT(28)
+#define REG_ANAPAR_A 0x1830
+#define BIT_ANAPAR_UPDATE BIT(29)
#define REG_RXAGCCTL0 0x18ac
#define BITS_RXAGC_CCK GENMASK(15, 12)
#define BITS_RXAGC_OFDM GENMASK(8, 4)
@@ -223,6 +225,8 @@ const struct rtw_table name ## _tbl = { \
#define BIT_CCK_BLK_EN BIT(1)
#define BIT_CCK_OFDM_BLK_EN (BIT(0) | BIT(1))
#define REG_CCAMSK 0x1c80
+#define REG_RSTB 0x1c90
+#define BIT_RSTB_3WIRE BIT(8)
#define REG_RX_BREAK 0x1d2c
#define BIT_COM_RX_GCK_EN BIT(31)
#define REG_RXFNCTL 0x1d30
@@ -243,6 +247,7 @@ const struct rtw_table name ## _tbl = { \
#define REG_OFDM_TXCNT 0x2de0
#define REG_ORITXCODE2 0x4100
#define REG_3WIRE2 0x410c
+#define REG_ANAPAR_B 0x4130
#define REG_RXAGCCTL 0x41ac
#define REG_DCKB_I_0 0x41bc
#define REG_DCKB_I_1 0x41c0
--
2.17.1
