Search Linux Wireless

Re: [PATCH 1/2] dt: bindings: net: ath11k: add qcom,board_id definition

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19/12/2019 14:49, Kalle Valo wrote:
John Crispin <john@xxxxxxxxxxx> writes:

We need to be able to define what id the board has allowing us to load the
correct definition data. This patch adds the description of the required
property.

Signed-off-by: John Crispin <john@xxxxxxxxxxx>
---
  .../devicetree/bindings/net/wireless/qcom,ath11k.yaml        | 5 +++++
  1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
index a1717db36dba..c68daf6ad424 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
@@ -142,6 +142,11 @@ properties:
          * reg
          * reg-names
+ qcom,board_id:
+      $ref: /schemas/types.yaml#/definitions/uint32
+      description:
+        The board id defining what board definition should be loaded

I think this needs more discussion. This is very tricky to get right, as
it needs to be extensible and what not. With ath10k we have learned that
a simple integer is not enough.


I was expecting this, there seems to be an option to add ranges and/or enums. I did however fail to find any docs on the schemeas.
	John



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux