Search Linux Wireless

Re: [RFC] mac80211: Fix setting txpower to zero.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/13/19 3:03 PM, greearb@xxxxxxxxxxxxxxx wrote:
From: Ben Greear <greearb@xxxxxxxxxxxxxxx>

With multiple VIFS ath10k, and probably others, tries to find the
minimum txpower for all vifs and uses that when setting txpower in
the firmware.

Johannes, sorry to be impatient, but I want to get some new ath10k-ct
changes into OpenWRT (to fix per-chain RSSI reporting), and if only my
driver change goes in, then ath10k-ct will have the old problem that Ryan Hsu
tried to fix.

Are you OK with initializing the txpower to -1 to mean 'unset' in mac80211?  Or, do I need
to come up with some other way to indicate to the driver that the txpower should
be ignored?

Thanks,
Ben


If a second vif is added and starts to scan, it's txpower is not initialized yet
and it set to zero.

ath10k had a patch to ignore zero values, but then it is impossible to actually set
txpower to zero.

So, instead initialize the txpower to -1 in mac80211, and let drivers know that
means the power has not been set and so should be ignored.

This should fix regression in:

commit 88407beb1b1462f706a1950a355fd086e1c450b6
Author: Ryan Hsu <ryanhsu@xxxxxxxxxxxxxxxx>
Date:   Tue Dec 13 14:55:19 2016 -0800

     ath10k: fix incorrect txpower set by P2P_DEVICE interface

Tested on ath10k 9984 with ath10k-ct firmware.

Signed-off-by: Ben Greear <greearb@xxxxxxxxxxxxxxx>
---
  drivers/net/wireless/ath/ath10k/mac.c | 2 +-
  drivers/net/wireless/ath/ath9k/main.c | 3 +++
  drivers/net/wireless/ath/ath9k/xmit.c | 7 +++++--
  include/net/mac80211.h                | 2 +-
  net/mac80211/iface.c                  | 1 +
  net/mac80211/main.c                   | 2 ++
  6 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 289d03da14b2..c846f232e930 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -5906,7 +5906,7 @@ static int ath10k_mac_txpower_recalc(struct ath10k *ar)
  	lockdep_assert_held(&ar->conf_mutex);
list_for_each_entry(arvif, &ar->arvifs, list) {
-		if (arvif->txpower <= 0)
+		if (arvif->txpower < 0) /* txpower not initialized yet? */
  			continue;
if (txpower == -1)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 14f253199909..2edf70cf7e7e 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1196,6 +1196,9 @@ static void ath9k_tpc_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
  {
  	int *power = data;
+ if (vif->bss_conf.txpower < 0)
+		return;
+
  	if (*power < vif->bss_conf.txpower)
  		*power = vif->bss_conf.txpower;
  }
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 751d0d0550b5..82c592ca2cd2 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2114,10 +2114,13 @@ static void setup_frame_info(struct ieee80211_hw *hw,
if (tx_info->control.vif) {
  		struct ieee80211_vif *vif = tx_info->control.vif;
-
+		if (vif->bss_conf.txpower < 0)
+			goto nonvifpower;
  		txpower = 2 * vif->bss_conf.txpower;
  	} else {
-		struct ath_softc *sc = hw->priv;
+		struct ath_softc *sc;
+	nonvifpower:
+		sc = hw->priv;
txpower = sc->cur_chan->cur_txpower;
  	}
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 2b70b9268f76..db66520c5389 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -569,7 +569,7 @@ struct ieee80211_ftm_responder_params {
   * @ssid: The SSID of the current vif. Valid in AP and IBSS mode.
   * @ssid_len: Length of SSID given in @ssid.
   * @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode.
- * @txpower: TX power in dBm
+ * @txpower: TX power in dBm.  -1 means not configured.
   * @txpower_type: TX power adjustment used to control per packet Transmit
   *	Power Control (TPC) in lower driver for the current vif. In particular
   *	TPC is enabled if value passed in %txpower_type is
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index b0c2df6e22c5..49fcf9d80f85 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1459,6 +1459,7 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
  	sdata->control_port_no_encrypt = false;
  	sdata->encrypt_headroom = IEEE80211_ENCRYPT_HEADROOM;
  	sdata->vif.bss_conf.idle = true;
+	sdata->vif.bss_conf.txpower = -1; /* unset */
sdata->noack_map = 0; diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index a148509a88bc..2f53188851ee 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -145,6 +145,8 @@ static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local)
  			continue;
  		if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
  			continue;
+		if (sdata->vif.bss_conf.txpower < 0)
+			continue;
  		power = min(power, sdata->vif.bss_conf.txpower);
  	}
  	rcu_read_unlock();



--
Ben Greear <greearb@xxxxxxxxxxxxxxx>
Candela Technologies Inc  http://www.candelatech.com




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux