This patch adds code to handle the BSS_CHANGED_BSS_COLOR flag. It will
trigger the propagation of BSS color settings into the FW. Handling is
slightly different between AP and STA interfaces.
Signed-off-by: John Crispin <john@xxxxxxxxxxx>
Changes in V2
* handle return codes
---
drivers/net/wireless/ath/ath11k/mac.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 6a8c1c3b8da2..fec268b9b711 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -1928,6 +1928,33 @@ static void ath11k_mac_op_bss_info_changed(struct ieee80211_hw *hw,
ath11k_wmi_send_obss_spr_cmd(ar, arvif->vdev_id,
&info->he_obss_pd);
+ if (changed & BSS_CHANGED_HE_BSS_COLOR) {
+ if (vif->type == NL80211_IFTYPE_AP) {
+ ret = ath11k_wmi_send_obss_color_collision_cfg_cmd(
+ ar, arvif->vdev_id, info->he_bss_color.color,
+ ATH11K_BSS_COLOR_COLLISION_DETECTION_AP_PERIOD_MS,
+ !info->he_bss_color.disabled);
+ if (ret)
+ ath11k_warn(ar->ab,
+ "failed to set bss color collision on vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ } else if (vif->type == NL80211_IFTYPE_STATION) {
+ ret = ath11k_wmi_send_bss_color_change_enable_cmd(ar,
+ arvif->vdev_id, 1);
+ if (ret)
+ ath11k_warn(ar->ab,
+ "failed to enable bss color change on vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ ret = ath11k_wmi_send_obss_color_collision_cfg_cmd(
+ ar, arvif->vdev_id, 0,
+ ATH11K_BSS_COLOR_COLLISION_DETECTION_STA_PERIOD_MS, 1);
+ if (ret)
+ ath11k_warn(ar->ab,
+ "failed to set bss color collision on vdev %i: %d\n",
+ arvif->vdev_id, ret);
+}
+ }
+
mutex_unlock(&ar->conf_mutex);
}
--
2.20.1
