Hello, I'm using Fedore9 and since the last update I cannot associate my rt2500pci card anymore, it's running into a timeout. I'm not seeing any log entries on the AP. rt2500pci is version 2.1.8 - Jan
ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 4 value 0x0 - Initializing interface 'wlan0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' ctrl_interface='/var/run/wpa_supplicant' ctrl_interface_group='wheel' (DEPRECATED) Priority group 0 id=0 ssid='harribert' Initializing interface (2) 'wlan0' Interface wlan0 set UP - waiting a second for the driver to complete initialization SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf capabilities: key_mgmt 0xf enc 0xf WEXT: Operstate: linkmode=1, operstate=5 Own MAC address: 00:11:09:be:de:4f wpa_driver_wext_set_wpa wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_countermeasures wpa_driver_wext_set_drop_unencrypted RSN: flushing PMKID list in the driver Setting scan request: 0 sec 100000 usec EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED ctrl_interface_group=10 (from group name 'wheel') Added interface wlan0 Ignore event for foreign ifindex 3 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) Wireless event: cmd=0x8b19 len=8 Received 276 bytes of scan results (1 BSSes) CTRL-EVENT-SCAN-RESULTS Selecting BSS from priority group 0 Try to find WPA-enabled AP 0: 00:18:84:26:44:0d ssid='harribert' wpa_ie_len=22 rsn_ie_len=0 caps=0x11 selected based on WPA IE selected WPA AP 00:18:84:26:44:0d ssid='harribert' Try to find non-WPA AP Trying to associate with 00:18:84:26:44:0d (SSID='harribert' freq=2462 MHz) Cancelling scan request WPA: clearing own WPA/RSN IE Automatic auth_alg selection: 0x1 WPA: using IEEE 802.11i/D3.0 WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1 WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 WPA: clearing AP RSN IE WPA: using GTK TKIP WPA: using PTK TKIP WPA: using KEY_MGMT WPA-PSK WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 No keys have been configured - skip key clearing wpa_driver_wext_set_drop_unencrypted State: DISCONNECTED -> ASSOCIATING wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 wpa_driver_wext_associate Setting authentication timeout: 20 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) Wireless event: cmd=0x8b06 len=8 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) Wireless event: cmd=0x8b06 len=8 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) Wireless event: cmd=0x8b04 len=12 EAPOL: disable timer tick Authentication with 00:18:84:26:44:0d timed out. Added BSSID 00:18:84:26:44:0d into blacklist No keys have been configured - skip key clearing State: ASSOCIATING -> DISCONNECTED wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 Setting scan request: 0 sec 0 usec State: DISCONNECTED -> SCANNING Starting AP scan (broadcast SSID) Trying to get current scan results first without requesting a new scan to speed up initial association Received 275 bytes of scan results (1 BSSes) CTRL-EVENT-SCAN-RESULTS Selecting BSS from priority group 0 Try to find WPA-enabled AP 0: 00:18:84:26:44:0d ssid='harribert' wpa_ie_len=22 rsn_ie_len=0 caps=0x11 selected based on WPA IE selected WPA AP 00:18:84:26:44:0d ssid='harribert' Try to find non-WPA AP Trying to associate with 00:18:84:26:44:0d (SSID='harribert' freq=2462 MHz) Cancelling scan request WPA: clearing own WPA/RSN IE Automatic auth_alg selection: 0x1 WPA: using IEEE 802.11i/D3.0 WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1 WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 WPA: clearing AP RSN IE WPA: using GTK TKIP WPA: using PTK TKIP WPA: using KEY_MGMT WPA-PSK WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 No keys have been configured - skip key clearing wpa_driver_wext_set_drop_unencrypted State: SCANNING -> ASSOCIATING wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 wpa_driver_wext_associate Setting authentication timeout: 20 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) Wireless event: cmd=0x8b06 len=8 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) Wireless event: cmd=0x8b04 len=12 Authentication with 00:18:84:26:44:0d timed out. BSSID 00:18:84:26:44:0d blacklist count incremented to 2 No keys have been configured - skip key clearing State: ASSOCIATING -> DISCONNECTED wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 Setting scan request: 0 sec 0 usec State: DISCONNECTED -> SCANNING Starting AP scan (broadcast SSID) Scan requested (ret=0) - scan timeout 30 seconds RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) Wireless event: cmd=0x8b19 len=8 Received 276 bytes of scan results (1 BSSes) CTRL-EVENT-SCAN-RESULTS Selecting BSS from priority group 0 Try to find WPA-enabled AP 0: 00:18:84:26:44:0d ssid='harribert' wpa_ie_len=22 rsn_ie_len=0 caps=0x11 skip - blacklisted Try to find non-WPA AP 0: 00:18:84:26:44:0d ssid='harribert' wpa_ie_len=22 rsn_ie_len=0 caps=0x11 skip - blacklisted No APs found - clear blacklist and try again Removed BSSID 00:18:84:26:44:0d from blacklist (clear) Selecting BSS from priority group 0 Try to find WPA-enabled AP 0: 00:18:84:26:44:0d ssid='harribert' wpa_ie_len=22 rsn_ie_len=0 caps=0x11 selected based on WPA IE selected WPA AP 00:18:84:26:44:0d ssid='harribert' Try to find non-WPA AP Trying to associate with 00:18:84:26:44:0d (SSID='harribert' freq=2462 MHz) Cancelling scan request WPA: clearing own WPA/RSN IE Automatic auth_alg selection: 0x1 WPA: using IEEE 802.11i/D3.0 WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1 WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 WPA: clearing AP RSN IE WPA: using GTK TKIP WPA: using PTK TKIP WPA: using KEY_MGMT WPA-PSK WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 No keys have been configured - skip key clearing wpa_driver_wext_set_drop_unencrypted State: SCANNING -> ASSOCIATING wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 wpa_driver_wext_associate Setting authentication timeout: 20 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) Wireless event: cmd=0x8b06 len=8 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) Wireless event: cmd=0x8b04 len=12 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) Wireless event: cmd=0x8b19 len=8 Received 276 bytes of scan results (1 BSSes) CTRL-EVENT-SCAN-RESULTS Selecting BSS from priority group 0 Try to find WPA-enabled AP 0: 00:18:84:26:44:0d ssid='harribert' wpa_ie_len=22 rsn_ie_len=0 caps=0x11 selected based on WPA IE selected WPA AP 00:18:84:26:44:0d ssid='harribert' Try to find non-WPA AP Already associated with the selected AP. Authentication with 00:18:84:26:44:0d timed out. Added BSSID 00:18:84:26:44:0d into blacklist No keys have been configured - skip key clearing
