On 2019-12-06 20:04, John Crispin wrote:
This patch adds code to handle the BSS_CHANGED_BSS_COLOR flag. IT will
trigger the propagation of BSS color settings into the FW. Handling is
slightly different between AP and STA interfaces.
Signed-off-by: John Crispin <john@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath11k/mac.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c
b/drivers/net/wireless/ath/ath11k/mac.c
index 6a8c1c3b8da2..c692922513b2 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -1928,6 +1928,19 @@ static void
ath11k_mac_op_bss_info_changed(struct ieee80211_hw *hw,
ath11k_wmi_send_obss_spr_cmd(ar, arvif->vdev_id,
&info->he_obss_pd);
+ if (changed & BSS_CHANGED_HE_BSS_COLOR) {
+ if (vif->type == NL80211_IFTYPE_AP) {
+ ath11k_wmi_send_obss_color_collision_cfg_cmd(
+ ar, arvif->vdev_id, info->he_bss_color.color,
+ ATH11K_BSS_COLOR_COLLISION_DETECTION_AP_PERIOD_MS,
+ !info->he_bss_color.disabled);
No error code check required, why?
+ } else if (vif->type == NL80211_IFTYPE_STATION) {
+ ath11k_wmi_send_bss_color_change_enable_cmd(ar, arvif->vdev_id, 1);
+ ath11k_wmi_send_obss_color_collision_cfg_cmd(ar, arvif->vdev_id, 0,
+ ATH11K_BSS_COLOR_COLLISION_DETECTION_STA_PERIOD_MS, 1);
Same here.
Vasanth
