[PATCH 4/5] rsi: fix non-atomic allocation in completion handler

[Johan Hovold <johan@xxxxxxxxxx>]

USB completion handlers are called in atomic context and must
specifically not allocate memory using GFP_KERNEL.

Fixes: a1854fae1414 ("rsi: improve RX packet handling in USB interface")
Cc: stable <stable@xxxxxxxxxxxxxxx> # 4.17
Cc: Prameela Rani Garnepudi <prameela.j04cs@xxxxxxxxx>
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
 drivers/net/wireless/rsi/rsi_91x_usb.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index 2c869df1c62e..ead75574e10a 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -16,6 +16,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/types.h>
 #include <net/rsi_91x.h>
 #include "rsi_usb.h"
 #include "rsi_hal.h"
@@ -29,7 +30,7 @@ MODULE_PARM_DESC(dev_oper_mode,
 		 "9[Wi-Fi STA + BT LE], 13[Wi-Fi STA + BT classic + BT LE]\n"
 		 "6[AP + BT classic], 14[AP + BT classic + BT LE]");
 
-static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num);
+static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num, gfp_t flags);
 
 /**
  * rsi_usb_card_write() - This function writes to the USB Card.
@@ -285,7 +286,7 @@ static void rsi_rx_done_handler(struct urb *urb)
 	status = 0;
 
 out:
-	if (rsi_rx_urb_submit(dev->priv, rx_cb->ep_num))
+	if (rsi_rx_urb_submit(dev->priv, rx_cb->ep_num, GFP_ATOMIC))
 		rsi_dbg(ERR_ZONE, "%s: Failed in urb submission", __func__);
 
 	if (status)
@@ -307,7 +308,7 @@ static void rsi_rx_urb_kill(struct rsi_hw *adapter, u8 ep_num)
  *
  * Return: 0 on success, a negative error code on failure.
  */
-static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num)
+static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num, gfp_t mem_flags)
 {
 	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
 	struct rx_usb_ctrl_block *rx_cb = &dev->rx_cb[ep_num - 1];
@@ -337,7 +338,7 @@ static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num)
 			  rsi_rx_done_handler,
 			  rx_cb);
 
-	status = usb_submit_urb(urb, GFP_KERNEL);
+	status = usb_submit_urb(urb, mem_flags);
 	if (status) {
 		rsi_dbg(ERR_ZONE, "%s: Failed in urb submission\n", __func__);
 		dev_kfree_skb(skb);
@@ -827,12 +828,12 @@ static int rsi_probe(struct usb_interface *pfunction,
 		rsi_dbg(INIT_ZONE, "%s: Device Init Done\n", __func__);
 	}
 
-	status = rsi_rx_urb_submit(adapter, WLAN_EP);
+	status = rsi_rx_urb_submit(adapter, WLAN_EP, GFP_KERNEL);
 	if (status)
 		goto err1;
 
 	if (adapter->priv->coex_mode > 1) {
-		status = rsi_rx_urb_submit(adapter, BT_EP);
+		status = rsi_rx_urb_submit(adapter, BT_EP, GFP_KERNEL);
 		if (status)
 			goto err_kill_wlan_urb;
 	}
-- 
2.24.0