> On 24 Jun 2019, at 11:04 pm, Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx> wrote: > > Hi Christian, > > Here it is. Hopefully unmangled this time. > > Regards, > Arend > --- > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c > index ec129864cc9c..7be8064c6dc7 100644 > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c > @@ -785,7 +785,8 @@ void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev) > sdiodev->settings->bus.sdio.txglomsz); > nents += (nents >> 4) + 1; > > - WARN_ON(nents > sdiodev->max_segment_count); > + WARN(nents > sdiodev->max_segment_count, "max_seg_cnt=%u, host_max_seg=%u, nents=%u\n", > + sdiodev->max_segment_count, host->max_segs, nents); > > brcmf_dbg(TRACE, "nents=%d\n", nents); > err = sg_alloc_table(&sdiodev->sgtable, nents, GFP_KERNEL); Hello Arend, I’ve resumed testing on 5.4-rc8 with ^ this patch and https://github.com/chewitt/linux/commit/07fd0f25ceb72b15aa8c3fbd149aa41cbc55d035 applied and brcmfmac.debug=30 in boot params. Here is more extended output: [ 6.115132] brcmfmac: brcmfmac_module_init No platform data available. [ 6.116841] brcmfmac: brcmf_sdio_probe Enter [ 6.118695] brcmfmac: F1 signature read @0x18000000=0x17294359 [ 6.118910] brcmfmac: brcmf_chip_recognition found AXI chip: BCM4359/9 [ 6.120687] brcmfmac: brcmf_chip_cores_check [1 ] core 0x800:52 base 0x18000000 wrap 0x18100000 [ 6.120692] brcmfmac: brcmf_chip_cores_check [2 ] core 0x812:59 base 0x18001000 wrap 0x18101000 [ 6.120695] brcmfmac: brcmf_chip_cores_check [3 ] core 0x83e:8 base 0x18002000 wrap 0x18102000 [ 6.120697] brcmfmac: brcmf_chip_cores_check [4 ] core 0x83c:21 base 0x18003000 wrap 0x18103000 [ 6.120698] brcmfmac: brcmf_chip_cores_check [5 ] core 0x812:59 base 0x18004000 wrap 0x18104000 [ 6.120700] brcmfmac: brcmf_chip_cores_check [6 ] core 0x829:22 base 0x18005000 wrap 0x18105000 [ 6.120702] brcmfmac: brcmf_chip_cores_check [7 ] core 0x840:5 base 0x1800a000 wrap 0x00000000 [ 6.120703] brcmfmac: brcmf_chip_cores_check [8 ] core 0x135:0 base 0x00000000 wrap 0x18109000 [ 6.120704] brcmfmac: brcmf_chip_cores_check [9 ] core 0x240:0 base 0x00000000 wrap 0x00000000 [ 6.120706] brcmfmac: brcmf_chip_set_passive Enter [ 6.121378] brcmfmac: brcmf_chip_get_raminfo RAM: base=0x180000 size=917504 (0xe0000) sr=0 (0x0) [ 6.121438] brcmfmac: brcmf_chip_setup ccrev=52, pmurev=26, pmucaps=0x3a0c3f1a [ 6.121441] brcmfmac: brcmf_get_module_param Enter, bus=0, chip=17241, rev=9 [ 6.121618] brcmfmac: brcmf_sdiod_sgtable_alloc nents=35 [ 6.121621] brcmfmac: brcmf_sdio_kso_init Enter [ 6.121635] brcmfmac: brcmf_sdio_drivestrengthinit No SDIO driver strength init needed for chip BCM4359/9 rev 9 pmurev 26 [ 6.121998] brcmfmac: brcmf_sdio_probe completed!! [ 6.122003] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4359-sdio for chip BCM4359/9 [ 6.122008] brcmfmac: brcmf_fw_get_firmwares enter: dev=mmc0:0001:1 [ 6.293561] brcmfmac: brcmf_fw_complete_request firmware brcm/brcmfmac4359-sdio.bin found [ 6.309769] brcmfmac: brcmf_fw_complete_request firmware brcm/brcmfmac4359-sdio.txt found [ 6.309772] brcmfmac: brcmf_fw_request_nvram_done enter: dev=mmc0:0001:1 [ 6.309840] brcmfmac: brcmf_fw_request_nvram_done nvram 000000007040259b len 3564 [ 6.309843] brcmfmac: brcmf_sdio_firmware_callback Enter: dev=mmc0:0001:1, err=0 [ 8.206959] brcmfmac: brcmf_sdio_download_code_file Enter [ 8.272184] brcmfmac: brcmf_sdio_verifymemory Compare RAM dl & ul at 0x00180000; size=636647 [ 8.354229] brcmfmac: brcmf_sdio_download_nvram Enter [ 8.359730] brcmfmac: brcmf_sdio_verifymemory Compare RAM dl & ul at 0x0025f214; size=3564 [ 8.367550] brcmfmac: brcmf_sdiod_ramrw: membytes transfer failed [ 8.373550] brcmfmac: brcmf_sdio_verifymemory: error -84 on reading 2048 membytes at 0x0025f214 [ 8.382188] brcmfmac: brcmf_sdio_download_firmware: dongle nvram file download failed [ 8.389982] brcmfmac: brcmf_sdio_firmware_callback failed: dev=mmc0:0001:1, err=-5 [ 8.397514] brcmfmac: brcmf_sdio_remove Enter [ 8.402641] brcmfmac: brcmf_detach Enter [ 8.434899] brcmfmac: brcmf_chip_set_passive Enter [ 8.458772] brcmfmac: brcmf_sdio_remove Disconnected I’m using renamed nvram.txt and fw_bcm4359c0_ag_apsta.bin from the bcmdhd.1.579.77.41.x driver (https://github.com/chewitt/bcmdhd/). In the full dmesg: https://pastebin.com/raw/DUUGSjWw there is some kernel splat starting 6.121488 that appears to be from probing. FWIW, the BT side of the device appears to be working fine. Any suggestions? Christian
