From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
[ Upstream commit 833fd34d743c728afe6d127ef7bee67e7d9199a8 ]
The vdev-start-response message should cause the
completion to fire, even in the error case. Otherwise,
the user still gets no useful information and everything
is blocked until the timeout period.
Add some warning text to print out the invalid status
code to aid debugging, and propagate failure code.
Signed-off-by: Ben Greear <greearb@xxxxxxxxxxxxxxx>
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/core.h | 1 +
drivers/net/wireless/ath/ath10k/mac.c | 2 +-
drivers/net/wireless/ath/ath10k/wmi.c | 19 ++++++++++++++++---
drivers/net/wireless/ath/ath10k/wmi.h | 8 +++++++-
4 files changed, 25 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 90c0c4a7175db..414153cd57845 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -811,6 +811,7 @@ struct ath10k {
struct completion install_key_done;
+ int last_wmi_vdev_start_status;
struct completion vdev_setup_done;
struct workqueue_struct *workqueue;
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 1588fe8110d00..2294ba311c47a 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -947,7 +947,7 @@ static inline int ath10k_vdev_setup_sync(struct ath10k *ar)
if (time_left == 0)
return -ETIMEDOUT;
- return 0;
+ return ar->last_wmi_vdev_start_status;
}
static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index bbfe7be214e12..68d324e6fcb45 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -3102,18 +3102,31 @@ void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb)
{
struct wmi_vdev_start_ev_arg arg = {};
int ret;
+ u32 status;
ath10k_dbg(ar, ATH10K_DBG_WMI, "WMI_VDEV_START_RESP_EVENTID\n");
+ ar->last_wmi_vdev_start_status = 0;
+
ret = ath10k_wmi_pull_vdev_start(ar, skb, &arg);
if (ret) {
ath10k_warn(ar, "failed to parse vdev start event: %d\n", ret);
- return;
+ ar->last_wmi_vdev_start_status = ret;
+ goto out;
}
- if (WARN_ON(__le32_to_cpu(arg.status)))
- return;
+ status = __le32_to_cpu(arg.status);
+ if (WARN_ON_ONCE(status)) {
+ ath10k_warn(ar, "vdev-start-response reports status error: %d (%s)\n",
+ status, (status == WMI_VDEV_START_CHAN_INVALID) ?
+ "chan-invalid" : "unknown");
+ /* Setup is done one way or another though, so we should still
+ * do the completion, so don't return here.
+ */
+ ar->last_wmi_vdev_start_status = -EINVAL;
+ }
+out:
complete(&ar->vdev_setup_done);
}
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 9b8562ff66987..cce028ea9b57d 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -6248,11 +6248,17 @@ struct wmi_ch_info_ev_arg {
__le32 rx_frame_count;
};
+/* From 10.4 firmware, not sure all have the same values. */
+enum wmi_vdev_start_status {
+ WMI_VDEV_START_OK = 0,
+ WMI_VDEV_START_CHAN_INVALID,
+};
+
struct wmi_vdev_start_ev_arg {
__le32 vdev_id;
__le32 req_id;
__le32 resp_type; /* %WMI_VDEV_RESP_ */
- __le32 status;
+ __le32 status; /* See wmi_vdev_start_status enum above */
};
struct wmi_peer_kick_ev_arg {
--
2.20.1
