The standard method for sdio devices connected to
an sdio interface is to define them as a child node
like we can see with wlcore.
Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
Acked-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
---
.../bindings/net/wireless/ti,wl1251.txt | 26 +++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
index bb2fcde6f7ff..f38950560982 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
@@ -35,3 +35,29 @@ Examples:
ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
};
};
+
+&mmc3 {
+ vmmc-supply = <&wlan_en>;
+
+ bus-width = <4>;
+ non-removable;
+ ti,non-removable;
+ cap-power-off-card;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wlan: wifi@1 {
+ compatible = "ti,wl1251";
+
+ reg = <1>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_21 */
+
+ ti,wl1251-has-eeprom;
+ };
+};
--
2.23.0
