Set switch_reason to CH_SWITCH_SCAN_BYPASS_DPD during frequency scanning in order to disable radar pattern detector Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx> --- drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c index 3d960871dbbe..46f4f15fe0e8 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c @@ -1333,8 +1333,10 @@ int mt7615_mcu_set_channel(struct mt7615_dev *dev) }; int ret; - if ((chandef->chan->flags & IEEE80211_CHAN_RADAR) && - chandef->chan->dfs_state != NL80211_DFS_AVAILABLE) + if (dev->mt76.hw->conf.flags & IEEE80211_CONF_OFFCHANNEL) + req.switch_reason = CH_SWITCH_SCAN_BYPASS_DPD; + else if ((chandef->chan->flags & IEEE80211_CHAN_RADAR) && + chandef->chan->dfs_state != NL80211_DFS_AVAILABLE) req.switch_reason = CH_SWITCH_DFS; else req.switch_reason = CH_SWITCH_NORMAL; -- 2.21.0
