Search Linux Wireless

Re: [PATCH wireless-drivers 1/2] mt76: mt76x2e: disable pcie_aspm by default

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 25.10.2019 13:46, Lorenzo Bianconi wrote:
>> On 25.10.2019 01:07, Lorenzo Bianconi wrote:
>>>> On 24.10.2019 23:54, Lorenzo Bianconi wrote:
>>>>>> On 24.10.2019 00:23, Lorenzo Bianconi wrote:
>>>>>>> On same device (e.g. U7612E-H1) PCIE_ASPM causes continuous mcu hangs and
>>>>>>> instability and so let's disable PCIE_ASPM by default. This patch has
>>>>>>> been successfully tested on U7612E-H1 mini-pice card
>>>>>>>
>>>>>>> Signed-off-by: Felix Fietkau <nbd@xxxxxxxx>
>>>>>>> Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
>>>>>>> ---
>>>>>>>  drivers/net/wireless/mediatek/mt76/mmio.c     | 47 +++++++++++++++++++
>>>>>>>  drivers/net/wireless/mediatek/mt76/mt76.h     |  1 +
>>>>>>>  .../net/wireless/mediatek/mt76/mt76x2/pci.c   |  2 +
>>>>>>>  3 files changed, 50 insertions(+)
>>>>>>>
>>>>>
>>>>> [...]
>>>>>
>>>>>>> +
>>>>>>> +	if (parent)
>>>>>>> +		pcie_capability_clear_word(parent, PCI_EXP_LNKCTL,
>>>>>>> +					   aspm_conf);
>>>>>>
>>>>>> + linux-pci mailing list
>>>>>
>>>>> Hi Heiner,
>>>>>
>>>>>>
>>>>>> All this seems to be legacy code copied from e1000e.
>>>>>> Fiddling with the low-level PCI(e) registers should be left to the
>>>>>> PCI core. It shouldn't be needed here, a simple call to
>>>>>> pci_disable_link_state() should be sufficient. Note that this function
>>>>>> has a return value meanwhile that you can check instead of reading
>>>>>> back low-level registers.
>>>>>
>>>>> ack, I will add it to v2
>>>>>
>>>>>> If BIOS forbids that OS changes ASPM settings, then this should be
>>>>>> respected (like PCI core does). Instead the network chip may provide
>>>>>> the option to configure whether it activates certain ASPM (sub-)states
>>>>>> or not. We went through a similar exercise with the r8169 driver,
>>>>>> you can check how it's done there.
>>>>>
>>>>> looking at the vendor sdk (at least in the version I currently have) there are
>>>>> no particular ASPM configurations, it just optionally disables it writing directly
>>>>> in pci registers.
>>>>> Moreover there are multiple drivers that are currently using this approach:
>>>>> - ath9k in ath_pci_aspm_init()
>>>>> - tg3 in tg3_chip_reset()
>>>>> - e1000e in __e1000e_disable_aspm()
>>>>> - r8169 in rtl_enable_clock_request()/rtl_disable_clock_request()
>>>>>
>>>> All these drivers include quite some legacy code. I can mainly speak for r8169:
>>>> First versions of the driver are almost as old as Linux. And even though I
>>>> refactored most of the driver still some legacy code for older chip versions
>>>> (like the two functions you mentioned) is included.
>>>>
>>>>> Is disabling the ASPM for the system the only option to make this minipcie
>>>>> work?
>>>>>
>>>>
>>>> No. What we do in r8169:
>>>>
>>>> - call pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1)
>>>> - If it returns 0, then ASPM (including the L1 sub-states) is disabled.
>>>> - If it returns an errno, then disabling ASPM failed (most likely due to
>>>>   BIOS forbidding ASPM changes - pci_disable_link_state will spit out
>>>>   a related warning). In this case r8169 configures the chip to not initiate
>>>>   transitions to L0s/L1 (the other end of the link may still try to enter
>>>>   ASPM states). See rtl_hw_aspm_clkreq_enable(). That's sufficient
>>>>   to avoid the ASPM-related problems with certain versions of this chip.
>>>>   Maybe your HW provides similar functionality.
>>>
>>> yep, I looked at rtl_hw_aspm_clkreq_enable. This is more or less what I did but
>>> unfortunately there is no specific code or documentation I can use for mt76x2e.
>>> So as last chance I decided to disable ASPM directly (in this way the chip is
>>> working fine).
>>> Do you think a kernel parameter to disable ASPM directly would be acceptable?
>>>
>> Module parameters are not the preferred approach, even though some maintainers
>> may consider it acceptable. I think it should be ok if you disable ASPM per
>> default. Who wants ASPM can enable the individual states via brand-new
>> sysfs attributes (provided BIOS allows OS to control ASPM).
>> However changing ASPM settings via direct register writes may cause
>> inconsistencies between PCI core and actual settings.
>> I'm not sure whether there's any general best practice how to deal with the
>> scenario that a device misbehaves with ASPM enabled and OS isn't allowed to
>> change ASPM settings. 
>> Maybe the PCI guys can advise on these points.
> 
> Hi Heiner,
> 
> I reviewed the mtk sdk and it seems mt7662/mt7612/mt7602 series does not
> have hw pcie ps support (not sure if it just not implemented or so). In my
> scenario without disabling ASPM the card does not work at all, so I guess we
> can proceed with current approach and then try to understand if we can do
> something better. What do you think?
> 

If there's no proper way to deal with the issue, then you may have to go with
the current approach. Just what you could do is calling pci_disable_link_state()
first and do the direct register modification limbo only as a fallback if
function returns an errno or CONFIG_PCIEASPM isn't defined.

It may make sense to change the return value of the pci_disable_link_state
dummy if CONFIG_PCIEASPM isn't defined: from 0 to e.g. -EOPNOTSUPP
Then in the driver it wouldn't be needed to check CONFIG_PCIEASPM.

Interestingly in mt76x2/pci.c there's the following:

/* Fix up ASPM configuration */

	/* RG_SSUSB_G1_CDR_BIR_LTR = 0x9 */
	mt76_rmw_field(dev, 0x15a10, 0x1f << 16, 0x9);

	/* RG_SSUSB_G1_CDR_BIC_LTR = 0xf */
	mt76_rmw_field(dev, 0x15a0c, 0xf << 28, 0xf);

	/* RG_SSUSB_CDR_BR_PE1D = 0x3 */
	mt76_rmw_field(dev, 0x15c58, 0x3 << 6, 0x3);

Would be helpful to know what this does and whether it may need to be adjusted.
At least in your case this fix attempt doesn't seem to be sufficient.


> @Ryder, Sean: do you have any hint on this topic?
> 
> Regards,
> Lorenzo
> 
>>
>>> Regards,
>>> Lorenzo
>>>
>> Heiner
>>
>>>>
>>>>> Regards,
>>>>> Lorenzo
>>>>>
>>>> Heiner
>>>>
>>>>>>
>>>>>>> +}
>>>>>>> +EXPORT_SYMBOL_GPL(mt76_mmio_disable_aspm);
>>>>>>> +
>>>>>>>  void mt76_mmio_init(struct mt76_dev *dev, void __iomem *regs)
>>>>>>>  {
>>>>>>>  	static const struct mt76_bus_ops mt76_mmio_ops = {
>>>>>>> diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
>>>>>>> index 570c159515a0..962812b6247d 100644
>>>>>>> --- a/drivers/net/wireless/mediatek/mt76/mt76.h
>>>>>>> +++ b/drivers/net/wireless/mediatek/mt76/mt76.h
>>>>>>> @@ -578,6 +578,7 @@ bool __mt76_poll_msec(struct mt76_dev *dev, u32 offset, u32 mask, u32 val,
>>>>>>>  #define mt76_poll_msec(dev, ...) __mt76_poll_msec(&((dev)->mt76), __VA_ARGS__)
>>>>>>>  
>>>>>>>  void mt76_mmio_init(struct mt76_dev *dev, void __iomem *regs);
>>>>>>> +void mt76_mmio_disable_aspm(struct pci_dev *pdev);
>>>>>>>  
>>>>>>>  static inline u16 mt76_chip(struct mt76_dev *dev)
>>>>>>>  {
>>>>>>> diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/pci.c b/drivers/net/wireless/mediatek/mt76/mt76x2/pci.c
>>>>>>> index 73c3104f8858..264bef87e5c7 100644
>>>>>>> --- a/drivers/net/wireless/mediatek/mt76/mt76x2/pci.c
>>>>>>> +++ b/drivers/net/wireless/mediatek/mt76/mt76x2/pci.c
>>>>>>> @@ -81,6 +81,8 @@ mt76pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>>>>>>>  	/* RG_SSUSB_CDR_BR_PE1D = 0x3 */
>>>>>>>  	mt76_rmw_field(dev, 0x15c58, 0x3 << 6, 0x3);
>>>>>>>  
>>>>>>> +	mt76_mmio_disable_aspm(pdev);
>>>>>>> +
>>>>>>>  	return 0;
>>>>>>>  
>>>>>>>  error:
>>>>>>>
>>>>>>
>>>>
>>




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux